急速圧縮機による非定常高噴射圧力ディーゼル噴霧の研究

ピッチは６０mm～80ｍｍで設計され ているが，本研究では取り付けピッ チを100ｍｍに設定し,補助ノズル噴

et al., Evaluation of Robotic Open Loop Mechanisms using Dynamic Characteristic Charts (in Japanese), Transactions of the Japan Society of Mechanical Engineers, Series C,

[r]

This study proposes a method of generating the optimized trajectory, which determines change of the displacement of a robot with respect to time, to reduce electrical energy or

et al., Determination of Dynamic Constitutive Equation with Temperature and Strain-rate Dependence for a Carbon Steel, Transactions of the Japan Society of Mechanical Engineers,

The main purpose of this talk is to prove the unique existence of global in time solutions to (1) for the initial data in scaling critical spaces, and study the asymptotics of

特別高圧 高圧 低圧（電力）

測定結果より、凝縮器の冷却水に低温のブライン −5℃ を使用し、さらに凝縮温度 を下げて、圧縮比を小さくしていくことで、測定値ハ(凝縮温度 10.6℃ 、圧縮比