• 検索結果がありません。

令和 3年 8月 5日 学

N/A
N/A
Protected

Academic year: 2022

シェア "令和 3年 8月 5日 学"

Copied!
2
0
0

読み込み中.... (全文を見る)

全文

(1)

令和 3年 8月 5日 学 位 論 文 の 審 査 要 旨

学位論文申請者氏名:劉 澍彬

論 文 題 目:Study on Electrochemical Deposition of Ni-P-Cr Alloy Coatings and Brazability of Deposit

Ni-P-Cr合金膜の電気化学析出とろう付性に関する研究

論文の概要及び判定理由

本研究では、ステンレス鋼のろう付用にNi-P-Cr 合金めっき浴を開発して、SUS304鋼 薄板のろう付を行い、ろう付部の各種特性を調査した。塩化ニッケル、塩化クロムおよび 次亜リン酸ナトリウムをそれぞれNi、CrおよびPの供給源として、クエン酸ナトリウム を Ni の錯化剤に、グリシンを Cr の錯化剤としためっき浴を開発して、ろう材として使 用可能な成分を有するNi-P-Cr合金電解膜の創製に成功した。また、リニアスイープボル タンメトリー測定より、開発めっき浴におけるNi-P-Cr合金の電気化学的還元メカニズム を明らかにし、次亜リン酸ナトリウムが Ni の電着を抑制し Cr の電着を促進する効果が あることを示した。さらに、開発めっき浴より作製した Ni-13.4Cr-11.6P(mass%)合金膜

によるSUS304 鋼のろう付部は、既存 Ni-11P(mass%)ろうによるろう付部に比べ、高強

度および高耐食性を有することを示した。これらの成果は、燃料電池などの多層熱交換器 への応用並びに電気化学および接合科学の発展に貢献するものである。

以上の理由から、博士(理工学)の学位に値するものと判定した。

審査年月日 令和 3年 8月 5日 審 査 委 員

主査 群馬大学学術研究院 教授 林 偉民 印 副査 群馬大学学術研究院 教授 松原 雅昭 印 副査 群馬大学学術研究院 教授 白石 壮志 印 副査 群馬大学学術研究院 准教授 小山 真司 印 副査 群馬大学学術研究院 教授 荘司 郁夫 印

(2)

関連論文

1 著者名 Shubin Liu,Ikuo Shohji,Makoto Iioka,Anna Hashimoto,

Junichiro Hirohashi,Tsunehito Wake,Susumu Arai 論文題目Micro-Brazing of Stainless Steel Using Ni-P Alloy Plating Ni-P合金めっきを用いたステンレス鋼のマイクロろう付 雑誌名 Applied Sciences Vol. 9 1094 (9頁) 2019年3月

2 著者 名 Anna Hashimoto,Shubin Liu,Ikuo Shohji,Tatsuya Kobayashi, Junichiro Hirohashi,Tsunehito Wake, Susumu Arai,

Yuichiro Kamakoshi

論文題目Brazing of Stainless Steel Using Electrolytic Ni-P Plating Film and Investigation of Corrosion Behavior

Ni-P電解めっき膜を用いたステンレス鋼のろう付と腐食挙動調査

雑誌名 Materials Science Forum Vol. 1016 522頁~527頁 2021年1月

3著者名 Shubin Liu,Ikuo Shohji,Tatsuya Kobayashi,Katsuharu Osanai,

Tetsuya Ando,Junichiro Hirohashi,Tsunehito Wake,Katsufumi Inoue,

Hiroki Yamamoto

論文題目Microstructure and Properties of SUS304 Stainless Steel Joints Brazed with Electrodeposited Ni-Cr-P Alloy Coatings

Ni-Cr-P電解合金膜によるSUS304ステンレス鋼ろう付部のミクロ組織と 特性

雑誌名 Materials Vol. 14 4216 (14頁) 2021年7月

4著者名 Shubin Liu,Ikuo Shohji,Tatsuya Kobayashi,Junichiro Hirohashi,

Tsunehito Wake,Hiroki Yamamoto,Yuichiro Kamakoshi 論文題目Mechanistic Study of Ni-Cr-P Alloy Electrodeposition and

Characterization of Deposits

Ni-Cr-P合金の電析機構と電析物の特性

雑誌名 Journal of Electroanalytical Chemistry Vol. 897 115582 (10頁) 2021年8月

参照

関連したドキュメント

Depending on the overlap between the beam spot (scan speed and repetition rate) and the laser pulse width, different thermal effects (e.g., the heat-affected zone)

町制施行 50 周年を 記念して 太陽電池時計の寄贈と感謝状の贈呈  岡垣電器商工組合から、岡垣町町制施行

admissible white noise distributions and the conditional expectation. In Section 3 we study.. the Hitsuda-Skorokhod integral and derive a variant of the Clark formula.

GDS profiles of specimens heated at 950°C under 50 Pa N 2.. 4.2.2 ろう隙間充填性に及ぼす Al の影響 図 10 に SUS 444 の 0.01 % Al 材と 0.03 %

4 Appearance of scratch parts of Zn-Ni and Zn electro- plated SUS 430LX after 150 cycles of CCT...

[r]

By studying the Reshetikhin‐Turaev and the Turaev‐Viro TQFTs [3, 4, 33], Detcherry, Kalfagianni and the author [11] gave a formula relating the Turaev‐Viro invariants of the

著者 Yoshikawa Norio, Yajima Masato, Murayama Norihiro, Yamamoto Hideki, Shibata Junji