• 検索結果がありません。

BEST PAKS

N/A
N/A
Protected

Academic year: 2022

シェア "BEST PAKS"

Copied!
1
0
0

読み込み中.... (全文を見る)

全文

(1)

P.O. Box 198, Lathrop, CA 95330 • 800-992-6066

Spread The Word

bestfertilizer.com

Simplot Professional Products •

BEST PAKS ® 20-10-5

DESCRIPTION: UP TO 12 MONTHS CONTROLLED-RELEASE FERTILIZER PLANTER PACKETS

BENEFITS: BEST-PAKS 20-10-5 in a Biodegradable Packet

 Contains POLYON® coated fertilizers.

 Supplies the nitrogen needed by most plants for up to one full year.

 Contains an expanded minor and secondary element package.

 BEST-PAKS are very clean and easy to handle during application.

 Limits the potential of leaching and ground water contamination.

 Contains a significant amount of kelp based organic matter to promote soil biology.

APPLICATION GUIDELINES:

At Time of Planting:

Place PAKS in backfill to within 15-20 cm (6-8 inches) of soil surface approximately 2.5 cm (1 inch) from the root ball. On plants of 19 liters (5 gallon size) and larger, it is acceptable to place an additional PAK in the bottom.

Maintenance Feeding:

Determine the number of paks required from the rate schedules below. Punch the appropriate number of holes 15-20 cm (6-8 inches) deep into the soil around the dripline. Place one PAK per hole, cover and irrigate.

APPLICATION RATES:

Use as Planting PAKS:

3.8 L (1 Gal.) 11.4 L (3 Gal.) 19 L (5 Gal.) 57 L (15 Gal.)

1 PAK 2 PAKS 3 PAKS 9 PAKS

Use in Feeding Established Plants: Trees, Shrubs, Perennials

Number of PAKS to apply per 1.25 cm (½ inch) of trunk diameter or for each 30-45 cm (1-1½ ft.) of plant height.

Slow Growing Plants in fair to good soil—2 PAKS

Fast Growing Plants or Plants in sandy or poor soil—4 PAKS

APPLICATION PRECAUTIONS:

 DO NOT EXCEED RECOMMENDED APPLICATION RATES.

GUARANTEED ANALYSIS:

TOTAL NITROGEN (N)* ...20.00%

4.10% Ammoniacal Nitrogen 1.90% Nitrate Nitrogen 14.00% Urea Nitrogen

AVAILABLE PHOSPHATE (P2O5)* ...10.00%

SOLUBLE POTASH (K2O)* ...5.00%

Calcium (Ca) ...2.00%

Magnesium (Mg) ...2.00%

Sulfur (S) ...3.00%

Copper (Cu) ...0.25%

Iron (Fe) ...0.90%

Manganese (Mn)...0.25%

Molybdenum (Mo) ...0.002%

Zinc (Zn) ...0.150%

Derived from: Polymer-Coated Urea, Polymer-Coated Sulfur-Coated Urea, Polymer-Coated Ammonium Nitrate, Polymer-Coated Ammonium Phosphate, Polymer-Coated Potassium Sulfate, Monoammonium Phosphate, Calcium Carbonate, Calcium Sulfate, Magnesium Carbonate, Magnesium Oxide, Magnesium Sulfate, Copper Oxide, Copper Sulfate, Ferric Oxide, Ferrous Sulfate, Manganese Oxide, Manganese Sulfate, Sodium Molybdate, Zinc Oxide, and Zinc Sulfate.

*A portion of the Nitrogen, Phosphate and Potash materials in this product have been coated to provide 18.4% coated slow release Nitrogen, 5.0% coated slow release available Phosphate and 5.0% coated slow release soluble Potash.

CAUTION: Application of fertilizer materials containing Molbdenum (Mo) may result in forage crops containing levels of Molybdenum (Mo) that are toxic to ruminate animals.

Polyon® is a registered trademark owned by Agrium and used under license.

PACKAGE SIZE/COUNT:

Each Case Contains 500 10 Gram Packets

Net Weight 11 Pounds (5.0 Kgs.) 74327_bestpaks20105_R12-17-08

HANDLING PRECAUTIONS:

CAUTION: KEEP OUT OF REACH OF CHILDREN

MSDS: See Reverse

HARMFUL IF SWALLOWED — DO NOT INHALE

参照

関連したドキュメント

min, temperature at tool flank of a TiAlN-coated carbide tool is approximately 40~50ºC lower than that of a non- coated carbide tool regardless of cutting fluids. Width of a flank

Kyoto University Research Information Repository https://repository.kulib.kyoto-u.ac.jp.. A Self-archived

Theory of solvation-induced reentrant phase separation in polymer solutions. Matsuyama, Akihiko;

We will determinate the polymer application probability in the water plant of Girardot, from data set of polymer, a dicotomic variable: polymer = 1 if lime is applicated and

Keywords: Pinning Model; Polymer Model; Linear Chain Model; Phase Transition; Localization Phenomena; Gradient Interaction; Laplacian Interaction; Free Energy; Markov

A related model is the directed polymer in a random medium (DPRM), in which the underlying Markov chain is generally taken to be SSRW on Z d and the polymer encounters a

Keywords: Disordered Systems, Quenched Disorder, Annealed Models, Polymer Models, Ef- fective Interface Models, Wetting

On the stationary solutions of random polymer models and their zero-temperature limits In this talk, I will discuss stationary measures for positive-temperature random polymer mod-