講演資料
データ物理破壊業界の変遷と世界と日本の比較パート2
日東造機(株) IT事業部長
NPO法人「自立支援工房あんとんねぇよ」 理事
データ・セキュリティ・コンソーシアム 事務局長
講演要旨:
パソコンやサーバー、さらには携帯電話やスマートフォンといった情報機器
には、HDD(ハードディスクドライブ)やSSD(ソリッドステートドライ
ブ)に代表される電子記録媒体に様々な企業活動の情報が記録されています。
この電子記録媒体のデータ消去の一つの手法が物理的に破壊する方法です。
日東造機株式会社は、この分野の先駆者としてデータ物理破壊業界の変遷と
世界と日本の比較を交え、日本型ソリューションのグローバル推進について
紹介します。
講師経歴:唐鎌 益男(カラカマ マスオ)
電子応用工学を学んだ後、制御機器系商社で27年間 主に新規開拓部門に在籍、27歳で営業
所長他、業務改善推進室、IOS27001監査委員。
2003年 日東造機(株)CrushBox部門の総合プロデュースを担当、
2012年よりCrushBoxビジネスパートナーを中心とした企業連携組織の任意団体DSC(デー
タ・セキュリティコンソーシアム)立上げに参加。
日東造機とデータ
セキュリティ コンソーシアムの
ご紹介
ゆりかごから墓場まで~そして再生
新しい社会貢献の提案
特別事業
当会員の持つリソースを持ち寄り、加工し
一連の
ノウハウとして提供
することで、
「
障がい者の
就労支援を行う事業者・団体・
社会福祉施設等、及び雇用を推進する事業者
等の
経済的自立に寄与する
。」
ことを目的とする事業
具体的な
社会貢献
事業
特別事業で提供するビジネスモデル
企業
官公庁
量販店
小売店
個人
寄付
有価
買取
障がい者
就労
就労支援
施設
中間処理
施設
精錬会社
電炉業者
プラ再生
事業者等
精錬会社
直接
売却
選別後
売却
売却
再
利
用
再生パソコン
約1台¥5000円×台数
解体基板等の販売
約PC1台¥300~1000円×台数
この範囲のノウハウを
提供・斡旋・支援
特別事業の具体事例
事業者(企業・官庁・個人)などからの
廃棄情報
機器入手
斡旋及びサポート等
入手情報機器のデータ破壊機器の斡旋及び
データ
破壊方法等の提供
当該法人に対する
情報取り扱い技術
の取得支援
(ISMS、Pマークなど)
入手済み情報機器の
修理・再生技術
の支援
再生情報機器の
販売
支援
廃棄情報機器の
分解・分別技術
支援
分解済情報機器の
リサイクル
支援
機密書類
の廃棄に関する技術支援 など
企業の排出パソコンのリユースリサイクルと障が
い者就労支援を
DSC参加企業が再生まで支援します。
品目ごとに分別・集約
(全量リサイクルへ)
4.GPS位置情報のトレース
5.受け入れ品のチェック
6.リユース/リサイクル区分け
7.修理用と分解用に区分け
1.
データーセンター HDDを物理破壊
2.
官公庁・一般企業パソコン上書消去orHDDを物理破壊
3.回収
(搬送)再生PC
として
販売
DEFENSE HUMAN RESOURCES ACTIVITY(米軍)
のデータ消去のガイドライン
NSA/CSS EPL, Hard Drive Destruction Devices 22 April 2015
Hard Drive Bending Devices
米国国防省(DHRA.MIL) コンピュータ(H
DD)データ消去3つのガイドライン
このガイドラインは直接(DoD)アクセスが
可能です
。
データ消去3つの手法
Overwriting
This is a process whereby a software program writes a combination of 0s and 1s over all the data on the hard drive. This process,
which requires a special software program, covers previous data with multiple layers of magnetic flux, making the data unreadable. The more frequently the data is overwritten, the greater the security. Three to seven repetitions are normal. This process is also known as "wiping" the hard drive or "wiping out " the data. The overwriting must be done by a trained person who certifies that the process has been successfully completed.
An advantage of this process is that the hard disk is not destroyed, so the drive can then be reused. The computer can be given to a
different person or office, sold, or donated to charity. Overwriting may also be less expensive than physical destruction or degaussing when used to sanitize just a few drives. On the other hand, the overwriting takes considerable time when done well (i.e., many
overwrites), so it may not be cost-effective when sanitizing a large number of drives.
Degaussing
Degaussing is the process of removing or neutralizing a magnetic field. It requires special equipment designed and approved for the
type of media being sanitized. Equipment of the type required for degaussing a hard disk is expensive, so this process is used more often with smaller magnetic media such as floppy disks and backup tapes. Degaussing may do a more thorough job of sanitization than overwriting, but the drive is no longer usable after this process. The process requires approved equipment operated by a trained individual who certifies successful completion.
Physical Destruction
The safest and surest way to sanitize a hard drive is to physically destroy it. This is an attractive option if the drive is to be discarded
anyway and not reused. One common method is shred or drill four holes through the entire drive. Another approach is to pry the platters apart to the extent that each platter is sufficiently warped or distorted to make it inoperable. It can also be taken to a professional for destruction. Some consumer electronics stores will do this as a courtesy for individual customers worried about what will happen to their old hard drive.
Physical destruction is also a good, and certainly easier, alternative for sanitizing smaller digital memory devices that contain sensitive