HPE Broadcom NetXtreme-E Driver for Windows Server 2019 Version: 216.0.143.3 (Optional)
Important Note!
HPE recommends the firmware provided in HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Windows Server x64 Editions, version 5.2.3.0 or later, for use with this driver.
Fixes
This product correct an issue which live firmware upgrade fails when run on both interfaces of the adapter simultaneously.
This product corrects a timeout issue which configures network connection.
Supported Devices and Features
This product supports the following network adapters:
HPE Broadcom NetXtreme-E Drivers for Red Hat Enterprise Linux 7 Version: 1.10.1-216.0.169.4 (Optional)
Important Note!
HPE recommends the firmware provided in HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Linux x86_64, version 1.9.0 or later, for use with these drivers.
Fixes
This product corrects an issue which offload is not happening on bond(vf and virtio) interface after the fail over with VF as the active slave
This product corrects an issue which driver loading failed on kdump kernel.
This product corrects an issue which RoCE driver causes input output memory management unit(IOMMU) warnings
This product corrects an issue which RoCE Link Aggregation (RoCE LAG) when Maximum Transmission Unit(MTU) was changed.
This product corrects an issue which Link up failed after resuming from hibernation
This product corrects an issue which Virtual Function RoCE driver causes Virtual Machine to be rebooted
Enhancements
This product now supports Red Hat Enterprise Linux 7 Update 8
This product now sets Maximum Transmission Unit(MTU) default value from firmware returned value This product now not support user establishing connections using RDMA communication manager(CM) when Priority-based Flow Control (PFC) configured VLAN ID is 0
Supported Devices and Features
This product supports the following network adapters:
HPE recommends the firmware provided in HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Linux x86_64, version 1.9.0 or later, for use with these drivers.
Fixes
This product corrects an issue which offload is not happening on bond(vf and virtio) interface after the fail over with VF as the active slave
This product corrects an issue which driver loading failed on kdump kernel.
This product corrects an issue which RoCE driver causes input output memory management unit(IOMMU) warnings
This product corrects an issue which RoCE Link Aggregation (RoCE LAG) when Maximum Transmission Unit(MTU) was changed.
This product corrects an issue which Link up failed after resuming from hibernation
This product corrects an issue which Virtual Function RoCE driver causes Virtual Machine to be rebooted This product corrects an issue which errata kernel loads inbox driver instead of this component after booting into OS
Enhancements
This product now sets Maximum Transmission Unit(MTU) default value from firmware returned value This product now not support user establishing connections using RDMA communication manager(CM) when Priority-based Flow Control (PFC) configured VLAN ID is 0
Supported Devices and Features
This product supports the following network adapters:
This component is intended to be used by HPE applications. It is a zip file that contains the same driver deliverable available from the vmware.com and the HPE vibsdepot.hpe.com webpages, plus an HPE specific CP0xxxxx.xml file.
HPE recommends the firmware provided in HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for VMware, version 5.11.0 or later, for use with this driver.
Fixes
This product corrects an issue where RDMA Ethernet Controller error description on ESXi Host.
Supported Devices and Features
This product supports the following network adapters:
This component is intended to be used by HPE applications. It is a zip file that contains the same driver deliverable available from the vmware.com and the HPE vibsdepot.hpe.com webpages, plus an HPE specific CP0xxxxx.xml file.
HPE recommends the firmware provided in HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for VMware, version 5.11.0 or later, for use with this driver.
Fixes
This product corrects an issue where RDMA Ethernet Controller error description on ESXi Host.
Supported Devices and Features
This product supports the following network adapters:
This component is intended to be used by HPE applications. It is a zip file that contains the same driver deliverable available from the vmware.com and the HPE vibsdepot.hpe.com webpages, plus an HPE specific CP0xxxxx.xml file.
HPE recommends the firmware provided in HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for VMware, version 5.11.0 or later, for use with this driver.
Enhancements
Initial release.
Supported Devices and Features
This product supports the following network adapters:
HPE Broadcom NetXtreme-E Drivers for Red Hat Enterprise Linux 7, version 1.10.1-216.0.169.4 or later, must be installed before installing this product.
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
Fixes
This product corrects an issue which RoCE bond is not getting created automatically after system reboot.
This product corrects an issue which errors/performance may degrades after hot plug operation is performed.
Enhancements
This product now disables loading RoCE driver on VFs when Link Aggregation is enabled.
This product now supports rdma-core v22.
Supported Devices and Features
This product supports the following network adapters:
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
Fixes
This product corrects an issue which RoCE bond is not getting created automatically after system reboot
This product corrects an issue which errors/performance may degrades after hot plug operation is
performed
Enhancements
This product now disables loading RoCE driver on VFs when Link Aggregation is enabled This product now supports rdma-core v22
Supported Devices and Features
This product supports the following network adapters:
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
Fixes
This product corrects an issue which RoCE bond is not getting created automatically after system reboot This product corrects an issue which errors/performance may degrades after hot plug operation is performed
Enhancements
Initial release.
Supported Devices and Features
This product supports the following network adapters:
