Updated to the latest thermal support for the platform.
Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Online ROM Flash Component for Linux - System ROM U43
Enhancements/New Features:
Updated to the latest thermal support for the platform.
Updated the RESTful API BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Problems Fixed:
This revision of the System ROM includes the latest revision of the Intel microcode for Intel Pentium processors which provides mitigations for security vulnerabilities documented as CVE-2020-0543 as well as CVE-2020-0548 and CVE-2020-0549. These security vulnerabilities are documented in Intel Security Advisories INTEL-SA-00320 and INTEL-SA-00329. These issues are not unique to HITACHI servers. This update does not impact systems using Intel Xeon based processors.
Addressed an issue where a dual port networking device may show up in the System Configuration Utilities with two Port 1 names instead of properly being represented as Port 1 and Port 2. This did not impact any functionality to the device.
This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for security vulnerabilities documented as CVE-2020-0543 as well as CVE-2020-0548 and CVE-2020-0549, also known as CacheOut. These security vulnerabilities are documented in Intel Security Advisories INTEL-SA-00320 and INTEL-SA-00329. These issues are not unique to Hitachi servers.
This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for security vulnerabilities documented as CVE-2020-0528 and CVE-2020-0529. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00322. These issues are not unique to Hitachi servers.
Addressed an issue where the serial port would not function properly when the iLO CLI serial interface was also enabled on the platform. This could lead to the serial BAUD rate not being configured properly and the serial output from the host would be corrupted or no output would be seen.
Addressed an extremely rare issue where the system could become unresponsive in POST when
configured in Legacy Boot Mode when a USB Mouse is attached. This issue does not impact systems
configured in UEFI Boot Mode.
Addressed an issue where boot devices could disappear from the Boot Options menu in the BIOS/Platform Configuration (RBSU) when pressing the F10 or F12 key to save boot order changes.
Addressed an issue where the server may become unresponsive during POST with a Red Screen
Exception (RSOD) when the server was reset (restarted) at the same time that an iLO firmware reset was initiated. Note that updating iLO firmware results in the reset of iLO firmware.
Addressed an issue where the System Utilities System Information data could not be successfully exported to an FTP (network) location. Previously the System Utilities would report the file was saved successfully but no actual information was saved on the network share.
Online ROM Flash Component for Linux - System ROM U44
Enhancements/New Features:
Updated to the latest thermal support for the platform.
Updated the RESTful API BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Problems Fixed:
This revision of the System ROM includes the latest revision of the Intel microcode for Intel Pentium processors which provides mitigations for security vulnerabilities documented as CVE-2020-0543 as well as CVE-2020-0548 and CVE-2020-0549. These security vulnerabilities are documented in Intel Security Advisories INTEL-SA-00320 and INTEL-SA-00329. These issues are not unique to HITACHI servers. This update does not impact systems using Intel Xeon based processors.
Addressed an issue where a dual port networking device may show up in the System Configuration Utilities with two Port 1 names instead of properly being represented as Port 1 and Port 2. This did not impact any functionality to the device.
This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for security vulnerabilities documented as CVE-2020-0543 as well as CVE-2020-0548 and CVE-2020-0549, also known as CacheOut. These security vulnerabilities are documented in Intel Security Advisories INTEL-SA-00320 and INTEL-SA-00329. These issues are not unique to Hitachi servers.
This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for security vulnerabilities documented as CVE-2020-0528 and CVE-2020-0529. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00322. These issues are not unique to Hitachi servers.
Addressed an issue where the serial port would not function properly when the iLO CLI serial interface was also enabled on the platform. This could lead to the serial BAUD rate not being configured properly and the serial output from the host would be corrupted or no output would be seen.
Addressed an extremely rare issue where the system could become unresponsive in POST when configured in Legacy Boot Mode when a USB Mouse is attached. This issue does not impact systems configured in UEFI Boot Mode.
Addressed an issue where boot devices could disappear from the Boot Options menu in the BIOS/Platform Configuration (RBSU) when pressing the F10 or F12 key to save boot order changes.
Addressed an issue where the server may become unresponsive during POST with a Red Screen
Exception (RSOD) when the server was reset (restarted) at the same time that an iLO firmware reset was initiated. Note that updating iLO firmware results in the reset of iLO firmware.
Addressed an issue where the System Utilities System Information data could not be successfully exported to an FTP (network) location. Previously the System Utilities would report the file was saved successfully but no actual information was saved on the network share.
Online ROM Flash Component for Windows x64 - OEM System ROM U34
Problems Fixed:
Addressed an issue where the serial port would not function properly when the iLO CLI serial interface was also enabled on the platform. This could lead to the serial BAUD rate not being configured properly and the serial output from the host would be corrupted or no output would be seen.
Addressed an issue where UEFI Serial Debug output could inadvertently be seen over BIOS Serial Console. This issue would be seen periodically on server reboots. This issue was introduced with System ROM v2.30 and did not impact servers using previous versions of the System ROM.
Addressed an extremely rare issue where the system could become unresponsive in POST when configured in Legacy Boot Mode when a USB Mouse is attached. This issue does not impact systems configured in UEFI Boot Mode.
Addressed an issue where boot devices could disappear from the Boot Options menu in the BIOS/Platform Configuration (RBSU) when pressing the F10 or F12 key to save boot order changes.
Addressed an issue where the system may experience a Bank 0x9/0xA/0xB Uncorrectable Machine Check Exception with a Status Code of 0xBE200000'000C110A and an Address field value of 0x00000000'00000280.
Enhancements/New Features
Updated to the latest thermal support for the platform.
Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Online ROM Flash Component for Windows x64 - System ROM U30
Problems Fixed:
Addressed an issue where the serial port would not function properly when the iLO CLI serial interface was also enabled on the platform. This could lead to the serial BAUD rate not being configured properly and the serial output from the host would be corrupted or no output would be seen.
Addressed an issue where UEFI Serial Debug output could inadvertently be seen over BIOS Serial Console. This issue would be seen periodically on server reboots. This issue was introduced with System ROM v2.30 and did not impact servers using previous versions of the System ROM.
Addressed an extremely rare issue where the system could become unresponsive in POST when
configured in Legacy Boot Mode when a USB Mouse is attached. This issue does not impact systems
configured in UEFI Boot Mode.
Addressed an issue where boot devices could disappear from the Boot Options menu in the BIOS/Platform Configuration (RBSU) when pressing the F10 or F12 key to save boot order changes.
Addressed an issue where the system may experience a Bank 0x9/0xA/0xB Uncorrectable Machine Check Exception with a Status Code of 0xBE200000'000C110A and an Address field value of 0x00000000'00000280.
Enhancements/New Features
Updated to the latest thermal support for the platform.
Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Online ROM Flash Component for Windows x64 - System ROM U32
Problems Fixed:
Addressed an issue where the serial port would not function properly when the iLO CLI serial interface was also enabled on the platform. This could lead to the serial BAUD rate not being configured properly and the serial output from the host would be corrupted or no output would be seen.
Addressed an issue where UEFI Serial Debug output could inadvertently be seen over BIOS Serial Console. This issue would be seen periodically on server reboots. This issue was introduced with System ROM v2.30 and did not impact servers using previous versions of the System ROM.
Addressed an extremely rare issue where the system could become unresponsive in POST when configured in Legacy Boot Mode when a USB Mouse is attached. This issue does not impact systems configured in UEFI Boot Mode.
Addressed an issue where boot devices could disappear from the Boot Options menu in the BIOS/Platform Configuration (RBSU) when pressing the F10 or F12 key to save boot order changes.
Addressed an issue where the system may experience a Bank 0x9/0xA/0xB Uncorrectable Machine Check Exception with a Status Code of 0xBE200000'000C110A and an Address field value of 0x00000000'00000280.
Enhancements/New Features
Updated to the latest thermal support for the platform.
Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Online ROM Flash Component for Windows x64 - System ROM U41
Problems Fixed:
Addressed an issue where the serial port would not function properly when the iLO CLI serial interface
was also enabled on the platform. This could lead to the serial BAUD rate not being configured properly
and the serial output from the host would be corrupted or no output would be seen.
Addressed an issue where UEFI Serial Debug output could inadvertently be seen over BIOS Serial Console. This issue would be seen periodically on server reboots. This issue was introduced with System ROM v2.30 and did not impact servers using previous versions of the System ROM.
Addressed an extremely rare issue where the system could become unresponsive in POST when configured in Legacy Boot Mode when a USB Mouse is attached. This issue does not impact systems configured in UEFI Boot Mode.
Addressed an issue where boot devices could disappear from the Boot Options menu in the BIOS/Platform Configuration (RBSU) when pressing the F10 or F12 key to save boot order changes.
Addressed an issue where the system may experience a Bank 0x9/0xA/0xB Uncorrectable Machine Check Exception with a Status Code of 0xBE200000'000C110A and an Address field value of 0x00000000'00000280.
Enhancements/New Features
Updated to the latest thermal support for the platform.
Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Online ROM Flash Component for Windows x64 - System ROM U43
Enhancements/New Features:
Updated to the latest thermal support for the platform.
Updated the RESTful API BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Problems Fixed:
This revision of the System ROM includes the latest revision of the Intel microcode for Intel Pentium processors which provides mitigations for security vulnerabilities documented as CVE-2020-0543 as well as CVE-2020-0548 and CVE-2020-0549. These security vulnerabilities are documented in Intel Security Advisories INTEL-SA-00320 and INTEL-SA-00329. These issues are not unique to HITACHI servers. This update does not impact systems using Intel Xeon based processors.
Addressed an issue where a dual port networking device may show up in the System Configuration Utilities with two Port 1 names instead of properly being represented as Port 1 and Port 2. This did not impact any functionality to the device.
This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for security vulnerabilities documented as CVE-2020-0543 as well as CVE-2020-0548 and CVE-2020-0549, also known as CacheOut. These security vulnerabilities are documented in Intel Security Advisories INTEL-SA-00320 and INTEL-SA-00329. These issues are not unique to Hitachi servers.
This revision of the System ROM includes the latest revision of the Intel Reference Code which provides
mitigations for security vulnerabilities documented as CVE-2020-0528 and CVE-2020-0529. These
security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00322. These issues are not
unique to Hitachi servers.
Addressed an issue where the serial port would not function properly when the iLO CLI serial interface was also enabled on the platform. This could lead to the serial BAUD rate not being configured properly and the serial output from the host would be corrupted or no output would be seen.
Addressed an extremely rare issue where the system could become unresponsive in POST when configured in Legacy Boot Mode when a USB Mouse is attached. This issue does not impact systems configured in UEFI Boot Mode.
Addressed an issue where boot devices could disappear from the Boot Options menu in the BIOS/Platform Configuration (RBSU) when pressing the F10 or F12 key to save boot order changes.
Addressed an issue where the server may become unresponsive during POST with a Red Screen
Exception (RSOD) when the server was reset (restarted) at the same time that an iLO firmware reset was initiated. Note that updating iLO firmware results in the reset of iLO firmware.
Addressed an issue where the System Utilities System Information data could not be successfully exported to an FTP (network) location. Previously the System Utilities would report the file was saved successfully but no actual information was saved on the network share.
Online ROM Flash Component for Windows x64 - System ROM U44
Enhancements/New Features:
Updated to the latest thermal support for the platform.
Updated the RESTful API BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options.
Problems Fixed:
This revision of the System ROM includes the latest revision of the Intel microcode for Intel Pentium processors which provides mitigations for security vulnerabilities documented as CVE-2020-0543 as well as CVE-2020-0548 and CVE-2020-0549. These security vulnerabilities are documented in Intel Security Advisories INTEL-SA-00320 and INTEL-SA-00329. These issues are not unique to HITACHI servers. This update does not impact systems using Intel Xeon based processors.
Addressed an issue where a dual port networking device may show up in the System Configuration Utilities with two Port 1 names instead of properly being represented as Port 1 and Port 2. This did not impact any functionality to the device.
This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for security vulnerabilities documented as CVE-2020-0543 as well as CVE-2020-0548 and CVE-2020-0549, also known as CacheOut. These security vulnerabilities are documented in Intel Security Advisories INTEL-SA-00320 and INTEL-SA-00329. These issues are not unique to Hitachi servers.
This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for security vulnerabilities documented as CVE-2020-0528 and CVE-2020-0529. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00322. These issues are not unique to Hitachi servers.
Addressed an issue where the serial port would not function properly when the iLO CLI serial interface
was also enabled on the platform. This could lead to the serial BAUD rate not being configured properly and the serial output from the host would be corrupted or no output would be seen.
Addressed an extremely rare issue where the system could become unresponsive in POST when configured in Legacy Boot Mode when a USB Mouse is attached. This issue does not impact systems configured in UEFI Boot Mode.
Addressed an issue where boot devices could disappear from the Boot Options menu in the BIOS/Platform Configuration (RBSU) when pressing the F10 or F12 key to save boot order changes.
Addressed an issue where the server may become unresponsive during POST with a Red Screen
Exception (RSOD) when the server was reset (restarted) at the same time that an iLO firmware reset was initiated. Note that updating iLO firmware results in the reset of iLO firmware.