機械工学系機械工学系機械工学系

(1)

研究業績

機械工学系

(2)

(3)

研究論文

A. Nomura

Some remarks on the existence of certain unramified p-extensions, Tokyo J. of Math., Vol.37, pp.31- 36, （2014.6）

A. Nomura

Notes on the existence of unramified non-abelian p-extensions over cyclic fields, Proc. Japan Acad.

vol.90, Ser. A, pp.67-70, （2014.4）

Y. Kanjin

Laguerre and disk polynomial expansions with nonnegative coefficients, J. Fourie Anal. Appl., Vol.

19, pp.495-513, （2013.1）「平成26年3月31日退職」

H.Tamura, V.A. Zagrebnov

Random Point Field Approach to Analysis of Anisotropic Bose-Einstein Condensations, Markov Processes Relat. Fields, Vol.18, no.3, pp.473-530,

（2012.7）

H.Wadade

Optimal embeddings of critical Sobolev-Lorentz- Zygmund spaces, Studia Math., Vol.223, pp.77-96,

（2014）

M.Ishiwata, M.Nakamura, H.Wadade

On the sharp constant for the weighted Truding- er-Moser type inequality of the scaling invariant form, Annales de l’Institut H. Poincare （C）, Vol.31, pp.297-314, （2014）

S.Machihara, T.Ozawa, H.Wadade

Generalizations of the logarithmic Hardy inequality in critical Sobolev-Lorentz spaces, J. Ineq. Appl., 2013:381, （2013）

H.Wadade

Quantitative estimates of embedding constants for Gagliardo-Nirenberg inequalities on critical Sobo- lev-Besov-Lorentz spaces, J. Fourier Anal. Appl., Vol.19, pp.1029-1059, （2013）

S.Machihara, T.Ozawa, H.Wadade

Hardy type inequalities on balls, Tohoku. Math. J., Vol.65, pp.321-330, （2013）

Y.Sawano, H.Wadade

On the Gagliardo-Nirenberg type inequality in the critical Sobolev-Morrey space, J. Fourier Anal.

Appl., Vol.19, pp.20-47, （2013）

T.Suzuki, H.Wadade

Optimal embeddings on critical Sobolev Lorentz spaces into generalized Morrey spaces, Adv. Math.

Sci. Appl., Vol.22, pp.225-238, （2012）

C.S.Lin, H.Wadade

Minimizing problems for the Hardy Sobolev type inequality with the singularity on the boundary, Tohoku Math. J., Vol.64, pp.79-103, （2012）

安達正明，佐部田龍佳，丹羽康人

振動環境下で撮影された光干渉像を用いた高精度 3次元形状計測，精密工学会誌，Vol.78, pp.1076- 1081, （2012.12）.

Masaaki ADACHI and Satoshi SUNADA

Phase-shift Extraction from Twice-Normalized Light Intensity Changes Recorded with Random Phase Shifts, Optical Review, Vol.21, pp.522-525,

（2014.11）.

J. Horikawa, A. Kawakami, M. Hyodo, S. Tanaka, M. Takeda, and H. Shimakage

Evaluation of Nano-Slot Antenna for Mid-Infrared Detectors, Infrared Physics & Technology, Vol. 67, pp. 21-24, （2014.07）.

Y. Zhang, R. Hoshi, D. Yamaguchi, Y. Okada-Shudo, M. Watanabe, M. Hyodo, Y. Zhu, X. Wang, Y. Zhu, G. Wang, C. Chen, T. Kanai, and S. Watanabe

Generation of quasi-cw deep ultraviolet light below 200 nm by an external cavity with a Brewster- input KBBF prism coupling device, Optics Com- munications, Vol. 295, pp.176-179. （2013.05）.

S. Shinohara, S. Sunada, T. Fukushima, T. Harayama, K. Arai, K. Yoshimura

Efficient optical path folding by using multiple total internal reflection, Applied Physics Letters Vol.

105, 151111 （2014.10）.

S. Sunada, K. Arai, K. Yoshimura, M. Adachi

Common noise-induced optical phase synchronization in lasers, Proc. of 2014 Symposium on Non- linear Theory and its Applications, pp. 470-473,

（2014.09）.

K. Arai, K. Yoshimura, S. Sunada, A. Uchida,

Synchronization induced by common ASE noise in semiconductor lasers, Proc. of 2014 Symposium on Nonlinear Theory and its Applications, pp. 474-477.

（2014.09）.

S. Sunada, T. Fukushima, S. Shinohara, T. Harayama, K. Arai, M. Adachi

A compact chaotic laser device with a two-dimensional external cavity structure, Applied Physics Letters, Vol. 104, 241105, （2014.06）.

S. Sunada, K. Arai, K. Yoshimura, M. Adachi

Optical Phase Synchronization by injection of common broadband low-coherent light, Physical Re- view Letters, Vol. 112, 204101, （2014.05）.

R. Takahashi, Y. Akizawa, A. Uchida, T. Harayama, K. Tsuzuki, S. Sunada, K. Arai, K. Yoshimura, P. Davis

Fast physical random bit generation with photonic integrated circuits with different external cavity lengths for chaos generation, Optics Express, Vol.

22, pp.11727-11740, （2014.05）.

T. Fukushima, S. Shinohara, S. Sunada, T. Harayama, K. Sakaguchi, Y. Tokuda,

Lasing of TM modes in a two-dimenstional GaAs microlaser, Optics Express, Vol. 22, pp.11912-11917,

（2014.05）.

S. Shinohara, T. Fukushima, S. Sunada, T. Harayama, K. Arai, K. Yoshimura

Anticorrelated bidirectional output of quasi-sta-

(4)

dium-shaped semiconductor microlasers, Optical Review Vol. 21, pp.113-116, （2014.03）.

T. Fukushima, S. Shinohara, S. Sunada, T. Harayama, K. Arai, K. Sakaguchi, Y. Tokuda

Selective excitation of lowest-order transverse ring modes in a quasi-stadium laser diode, Optics Letters, Vol. 38, pp.4158-4161, （2013.10）.

R. Takahashi, Y. Akizawa, A. Uchida, T. Harayama, K. Tsuzuki, S. Sunada, K. Yoshimura, K. Arai, P. Davis,

Physical random number generation using photonic integrated circuits with mutually-coupled semiconductor lasers, Frontiers in Optics 2013 Technical Digest on CD-ROM FW4C.2, （2013.10）.

T. Fukushima, S. Shinohara, S. Sunada, T. Harayama, K. Sakaguchi, Y. Tokuda

Ray dynamical simulation of Penrose unilluminable room cavity, Frontiers in Optics 2013 Technical Digest on CD-ROM JW3A.19, （2013.10）.

K. Arai, S. Shinohara, S. Sunada, K. Yoshimura, T. Harayama, A. Uchida

Noise effects on generalized chaos synchronization in semiconductor lasers, Proc. of 2013 International Symposium on Nonlinear Theory and its Applica- tions, （2013.09）.

S. Shinohara, T. Fukushima, S. Sunada, T. Harayama, K. Arai, K. Yoshimura

Nonlinear Modal Dynamics in Two-Dimensional Cavity Microlasers, Proc. of 2013 International Symposium on Nonlinear Theory and its Applica- tions, （2013.09）.

S. Sunada, T. Fukushima, S. Shinohara, T. Harayama, M. Adachi

Stable single-wavelength emission from fully- chaotic microcavity lasers, Physical Review A, Vol.

88, 013802, （2013.07）.

S. Sunada, T. Harayama, P. Davis, K. Arai, K. Yoshimura, K. Tsuzuki, A. Uchida

Noise amplification by chaotic dynamics in a de- layed feedback laser system and its application to nondeterministic random bit generation, Chaos, Vol. 22, 047513, （2012.12）.

K. Arai, T. Harayama, P. Davis, S. Sunada

Randomness in a Galton board from the viewpoint of predictability: sensitivity and statistical bias of output states, Physical Review E, Vol. 86, 056216,

（2012.11）.

Y. Akizawa, R. Takahashi, H. Aida, A. Uchida, T. Harayama, K. Tsuzuki, S. Sunada, K. Yoshimura, K. Arai, P. Davis

Nonlinear Dynamics in a Photonic Integrated Cir- cuit for Fast Chaos Generation, Proc. of 2012 Inter- national Symposium on Nonlinear Theory and its Applications, pp. 134-137, （2012.10）.

R. Takahashi, Y. Akizawa, H. Aida, A. Uchida, T. Harayama, K. Tsuzuki, S. Sunada, K. Yoshimura, K. Arai, P. Davis

Random Number Generation in a Photonic Inte- grated Circuit for Fast Chaos Generation, Proc. of 2012 International Symposium on Nonlinear Theo- ry and its Applications, pp. 138-141, （2012.10）.

S. Sunada, T. Harayama, P. Davis, K. Arai, K. Yoshimura, K. Tsuzuki, M. Adachi

Noise Amplification Based on Dynamical Insta- bilities in Semiconductor Laser Systems and its Application to Nondeterministic Random Bit Gen- erators, Proc. of 2012 International Symposium on Nonlinear Theory and its Applications, pp. 263-267,

（2012.10）.

K. Arai, T. Harayama, P. Davis, S. Sunada

Multi-Bit Sampliing from Chaotic Time Series in Random Number Generation, Proc. of 2012 Inter- national Symposium on Nonlinear Theory and its Applications, pp. 268-271, （2012.10）.

Y. Akizawa, T. Yamazaki, A. Uchida, T. Harayama, S. Sunada, K. Arai, K. Yoshimura, P. Davis

Physical random number generation with band- width-enhanced chaotic semiconductor lasers at 8x50 Gb/s, IEEE Photonics Technology Letters, Vol. 24, pp.1042-1044, （2012.06）.

S. Sunada, T. Harayama, K. Arai, K. Yoshimura, P. Davis, K. Tsuzuki, A. Uchida

Theory and experiments of fast nondeterministic random bit generation using on-chip chaos lasers, Procedia IUTAM Vol. 5, pp.190-194, （2012.06）.

T. Fukushima, S. Sunada, T. Harayama, K. Sakaguchi, Y. Tokuda

Lowest-order axial and ring mode lasing in confo- cal quasi-stadium laser diodes, Applied Optics, Vol.

51, pp.2515-2520, （2012.05）.

T. Harayama, S. Sunada, K. Yoshimura, K. Arai, J. Muramatsu, A. Uchida, P. Davis

Theory of fast nondeterministic physical random bit generation with chaotic lasers, Physical Review E, Vol. 85, 046215, （2012.04）.

T. Mikami, K. Kanno, K. Aoyama, A. Uchida, T. Ikeguchi, T. Harayama, S. Sunada, K. Arai, K. Yoshimura, P. Davis

Estimation of entropy rate in a fast physical random bit generator using a chaotic semiconductor laser with intrinsic noise, Physical Review E, Vol.

85, 016211, （2012,01）.

Komatsu,N., Kimura,S.

Entropic Cosmology in a Dissipative Universe, Phys. Rev. D, Vol. 90, Issue 12, 123516, pp. 1-14,

（2014.12）.

河野孝昭，木綿隆弘，小垣哲也

風車タワーの風車後流に与える影響と空気力のLES 解析, 第23 回風工学シンポジウム論文集，pp. 139- 144, （2014.12）．

中田博精, 木綿隆弘, 櫃田禎大, 坂井　遼, 河野孝昭, 古路裕子

斜風時のクロスフロー風車の性能に関する研究（風

(5)

車の円形端板とフェンス前面の偏向板の効果），日本風力エネルギー学会誌, Vol. 111（通巻）, Vol. 38

（3）, pp. 45-51, （2014.11）.

Kimura,S.

Transient Analysis of Thermal Energy Storage Process in a Horizontal Circular Tank Filled with Water; Scale analysis and numerical verification, Waves and Vortices in Complex Media; Proceed- ings of 5-th International Scientific School of Young Scientists, Moscow, RUSSIA, pp.48-51,

（2014.11）.

Kobayashi,Y., Kimura,S., Kanaoka,Y., Komatsu,N., Kiwata,T., Kono,T.

Numerical Analysis of Temperature Field around the Micro Thermal Flow Sensor, Proceedings of the 25th International Symposium on Transport Phenomena, Krabi, THAILAND, Paper 146 （USB）, pp. 1-5, （2014.11）.

Yamamoto,A., Kimura,S., Komatsu,N., Kiwata,T., Kono,T.

Influence of the Complicated Topography on the Turbulence Structure in a Deciduous Broadleaf Forest Canopy, Proceedings of the 25th Interna- tional Symposium on Transport Phenomena, Krabi, THAILAND, Paper 104 （USB）, pp. 1-7, （2014.11）.

Kiwata,T., Yamaguchi,M., Kono,T., Ueno,T.

Water Tunnel Experiments on Transverse-gal- loping of Cantilevered Rectangular and D-section Prisms, Journal of Fluid Science and Technology, Vol. 9, No. 3, p.JFST0056, （2014.9）.

Vynnycky,M., Kimura,S.

Can Natural Convection Alone Explain the Mpem- ba Effect? Int. J. Heat Mass Transfer, Vol. 80, pp.

243-255, （2014.9）.

臼沢太一，木綿隆弘，平野大慈

拡大および縮小テーパ環を有する円形噴流の流れ特性，日本機械学会論文集, Vol. 80, No. 817, pp. 1-17, DOI:10.1299/transjsme.2014fe0256, （2014.9）.

Sakai,H., Kiwata,T., Nakata,H., Kono,T., Furumichi,H., Nakaguchi,A.

Performance of Cross-flow Wind Turbines Located Above the Windbreak Fence with a Right-Angled Deflector, Proceedings of the Grand Renewable En- ergy 2014 International Conference and Exhibition, Tokyo, JAPAN, O-Wd-19-6 （DVD-ROM）, pp. 1-4,

（2014.7）.

Wakasa,M., Kiwata,T., Firdaus,R., Kono,T.

Performance of H-type Darrieus Wind Turbine in Shear Flow, Proceedings of the Grand Renewable Energy 2014 International Conference and Exhibi- tion, Tokyo, JAPAN, O-Wd-16-3 （DVD-ROM）, pp. 1-4, （2014.7）.

Higashi,D., Kono,T., Kiwata,T., Kimura,S., Komatsu,N.

Experimental Study of Aeroacoustic Noise from a Straight-bladed Vertical-axis Wind Turbine, Pro- ceedings of the Grand Renewable Energy 2014 In-

ternational Conference and Exhibition, Tokyo, JA- PAN, O-Wd-8-1 （DVD-ROM）, pp. 1-4, （2014.7）.

Kikuchi,Y., Kiwata,T., Kono,T.

Performance of Undershot Water Wheel in Snow Drainageway, Proceedings of the Grand Renewable Energy 2014 International Conference and Exhibi- tion, Tokyo, JAPAN, O-Sh-1-5 （DVD-ROM）, pp.

1-4, （2014.7）.

Kono,T., Kiwata,T., Kogaki,T.

LES Analysis of the Wake of a Wind Turbine and the Aerodynamic Force on the Wind Turbine Tower, Proceedings of the Grand Renewable En- ergy 2014 International Conference and Exhibition, Tokyo, JAPAN, P-Wd-2-2 （DVD-ROM）, pp. 1-4,

（2014.7）.

Kiwata,T., Yamaguchi,M., Nakajima,A., Kono,T., Ueno,T.

Flow-induced Transverse Vibration of a Cantile- vered Prism for Energy Harvesting, Proceedings of the ASME 2014 Pressure Vessels & Piping Division Conference, PVP2013, Anaheim, Califor- nia, USA, PVP2014-28939 （DVD-ROM）, pp. 1-10,

（2014.7）.

Evolution of the Universe in Entropic Cosmologies via Different Formulations, Phys. Rev. D, Vol. 89, Issue 12, 123501, pp. 1-22, （2014.6）.

McKibbin,R., Kimura,S.

Heat Flow from a Buried Cylinder Partially Sub- merged in Groundwater, Proceedings of the 5th International Conference on Porous Media and its Application in Science and Engineering, Kona, Ha- waii, USA, pp.1-6, （2014.6）.

中田博精，木綿隆弘，櫃田禎大，古路裕子，河野孝昭道路用フェンス上部に水平に設置したクロスフロー風車の性能（フェンス無孔板領域の影響），日本風力エネルギー学会誌, Vol. 109（通巻）, Vol. 38（1）, pp. 1-7, （2014.5）.

Ota,T., Kimura,S., Kiwata,T., Komatsu,N., Kono,T.

Experimental Confirmation on the Calibration Curves for Preston’s Method, Journal of Energy and Power Engineering, Vol. 8, No. 4, pp. 689-692,

（2014.4）.

Ota,T., Kimura,S., Kanaoka,Y., Kiwata,T., Komatsu,N., Kono,T.

Wall Shear Stress Measurement with a Micro Thermo-device, Proceedings of the 5th Interna- tional Conference on Heat Transfer and Fluid Flow in Microscale, Marseille, FRANCE, pp. 1-6,

（2014.4）.

臼沢太一, 木綿隆弘, 樋本航

ノズル内部に偏向板を設置した平面噴流の流れ特性, 日本機械学会論文集（B編）, Vol. 79, No. 808，

pp. 2728-2742, （2013.12）.

河野孝昭，東　大輝，木綿隆弘，木村繁男，小松信義直線翼垂直軸風車の空力騒音に関する風洞実験，日

(6)

本機械学会論文集（B編），Vol. 79，No. 808，pp.

2577-2581，（2013.12）.

Kimura,S.

On Morning Breakup; Intuition and Quantification, One page abstract for the invited lecture at 58th Congress of Indian Society of Theoretical and Ap- plied Mechanics （ISTAM 2013）, Kolkata, INDIA,

（2013.12）.

Kiwata,T., Firdaus,R., Kono,T., Nagao,K., Sawade,Y., Koami,Y.

Experimental and Numerical Investigation of Or- thopter Wind Turbine with Flat Plate Blades, Pro- ceedings of the International Symposium on Eco- Topia Science’13, Nagoya, JAPAN, 15-3-31 （CD- ROM）, p. 1, （2013.12）.

Yamagishi,A., Kono,T., Kiwata,T., Kimura,S., Komatsu,N.

Numerical and Experimental Study on the Flow Characteristics around a Cross-flow Wind Turbine, Proceedings of the 12th International Symposium on Fluid Control, Measurements, and Visualiza- tion （FLUCOME 2013）, Nara, JAPAN, OS18-04-4

（USB）, pp. 1-10, （2013.11）.

Higashi,D., Kono,T., Kiwata,T., Kimura,S., Komatsu,N.

Measurement of Aeroacoustic Noise from a Straight-Bladed Vertical-Axis Wind Turbine, Proceedings of the 12th International Symposium on Fluid Control, Measurements, and Visualiza- tion （FLUCOME 2013）, Nara, JAPAN, OS18-04-3

（USB）, pp. 1-8, （2013.11）.

Hitsuda,Y., Nakata,H., Kiwata,T., Kono,T., Furumichi,H., Nakaguchi,A.

Performance of a Cross-Flow Wind Turbine and Flow around a Porous Fence in Oblique Wind, Proceedings of the 12th International Symposium on Fluid Control, Measurement and Visualiza- tion （FLUCOME2013）, Nara, JAPAN, OS18-02-4

（USB）, pp. 1-10, （2013.11）.

Elkhoury,M., Kiwata,T., Issa,J.

Aerodynamic Loads Predictions of a Vertical-Axis Wind Turbine Utilizing Various Turbulence Clo- sures, Proceedings of the 12th International Sym- posium on Fluid Control, Measurement and Visual- ization （FLUCOME2013）, Nara, JAPAN, OS18-04- 2 （USB）, pp. 1-9, （2013.11）.

Ota,T., Kimura,S., Kanaoka,Y., Kiwata,T., Komatsu,N., Kono,T.

Experimental Confirmations of MEMS Based Sen- sor for Flow Direction and Wall Shear Stress, Proceedings of the 24th International Symposium on Transport Phenomena, ISTP-24, Yamaguchi, JAPAN, pp. 918-922, （2013.11）.

Masuda,Y., Yoneya,M., Kimura,S.

Multiple Solutions of Double-Diffusive Convection in Porous Media due to Opposing Heat and Mass Fluxes on Vertical Walls, Journal of Thermal Sci-

ence and Technology, Vol. 8, No. 3, pp. 533-542,

（2013.10）.

Entropic Cosmology for a Generalized Black-hole Entropy, Phys. Rev. D, Vol. 88, Issue 8, 083534, pp.

1-16, （2013.10）.

Firdaus,R., Kiwata,T., Kono,T., Nagao,K.

Numerical Study of the Performance and Aero- dynamic Analysis of a Small Vertical-Axis Wind Turbine with Variable Pitch Straight-Blades, Pro- ceedings of the 4th International Conference on Jets, Wakes and Separated Flows, Nagoya, JAPAN, ICJWSF2013-1058 （CD-ROM）, pp. 1-6, （2013.9）.

Ota,T., Kimura,S., Kiwata,T., Komatsu,N., Kono,T.

Experimental Confirmation on the Calibra- tion Curves for Preston’s Method, Proceedings of the 4th International Conference on Jets, Wakes and Separated Flows, Nagoya, JAPAN, ICJWSF2013-1060 （CD-ROM）, pp. 1-3, （2013.9）.

Yamaguchi,M., Kiwata,T., Kono,T., Ueno,T.

Water Tunnel Experiments on Transverse Vi- bration of a Cantilevered Prism, Proceedings of the 4th International Conference on Jets, Wakes, and Separated Flows, Nagoya, JAPAN, ICJWSF2013-1192 （CD-ROM）, pp. 1-6, （2013.9）.

Usuzawa,T., Yoshida,F., Hirano,D., Kiwata,T.

Flow Characteristics of a Round Jet with a Diver- gent or Convergent Ring, Proceedings of the 4th International Conference on Jets, Wakes, and Sepa- rated Flows, Nagoya, JAPAN, ICJWSF2013-1119

（CD-ROM）, pp. 1-6, （2013.9）.

Komatsu,N.

Entropic Cosmology from a Thermodynamics Viewpoint, Abstracts of the 12th Asia Pacific Physics Conference APPC12, Chiba, JAPAN, B4- PWe-1, pp. 246, （2013.7）. Proceedings of the 12th Asia Pacific Physics Conference （APPC12）, JPS Conf. Proc., Vol. 1, 013112, pp. 1-4, 2014, （2014.3）.

Kiwata,T., Yamaguchi,M., Kono,T., Ueno,T.

Flow-induced Transverse Vibration of a Cantile- vered Prism and Vibration-Generated Power Us- ing Magnetostrictive Material, Proceedings of the ASME 2013 Pressure Vessels & Piping Division Conference, PVP2013, Paris, FRANCE, PVP2013- 97277 （DVD-ROM）, pp. 1-9, （2013.7）.

Kiwata,T., Nakata,H., Kono,T., Hitsuda,Y., Furumichi,H., Nakaguchi,A., Oshkai,P.

Effects of Rotor Position on the Performance of a Cross-flow Wind Turbine Located above a Wind- break Fence, Proceedings of the 12th Americas Conference on Wind Engineering （12ACWE）, Se- attle, USA, T-08 （USB）, pp. 1-10, （2013.6）.

Barannyk,O., Akhgari,A., Wheeler,C.O., Kiwata,T., Oshkai,P.

Vortex Dynamics in the Near-wake of a Diffuser- Augmented Vertical Axis Wind Turbine, Proceed-

(7)

ings of the 12th Americas Conference on Wind En- gineering （12ACWE）, Seattle, USA, T-06 （USB）, pp. 1-16, （2013.6）.

長谷川翔，木綿隆弘，岡島厚，六郷彰，木村繁男，小松信義

地面板上を移動する角柱周りの流れの可視化実験と数値解析，可視化情報学会論文集, Vol. 33, No. 5, pp. 7-15, （2013.5）.

木綿隆弘，歌野原陽一，中村晶，木村繁男，小松信義，

山田紘司，菅原康裕，中道淳平

円管内オリフィス下流域における壁面せん断応力の時間平均と変動成分，日本機械学会論文集（Ｂ編），

Vol. 79, No. 799, pp. 258-262, （2013.3）.　

Non-adiabatic-like Expansion of the Late Universe in Entropic Cosmology, Phys. Rev. D, Vol. 87, Issue 4, 043531, pp. 1-15, （2013.2）.

河野孝昭, 小垣哲也

アクチュエータ・ディスク・モデルを用いた風車後流のラージ・エディ・シミュレーション（風車タワーが風速分布に与える影響）, 日本風力エネルギー学会論文集, Vol. 104（通巻）, Vol. 36（4）, pp.

69-76, （2013.2）.

木綿隆弘，澤出憲昭，小網優理絵，長尾浩二，河野孝昭，小木曽雄一郎

可変ピッチ平板翼を有する抗力型垂直軸風車の性能に関する研究, 第22 回風工学シンポジウム論文集，

pp. 395-400, （2012.12）．

中田博精，木綿隆弘，櫃田禎大，古路裕子，河野孝昭フェンス上部に設置したクロスフロー風車の水平位置による性能及び下流域の流れへの影響, 第22回風工学シンポジウム論文集，pp. 419-424, （2012.12）．

Ito,Y., Kimura,S., Kiwata,T., Komatsu,N., Kono,T.

Relations between Turbulence Diffusivities and Leaf Area Densities in a Deciduous Forest Canopy, Proceedings of the 23rd International Sympo- sium on Transport Phenomena, Auckland, NEW ZEALAND, Submission No. 141 （USB）, pp. 1-7,

（2012.11）.

Kimura,S., Yamamoto,H., Kanev,K.

Periodic Solidification in a Rectangular Duct Due to Velocity Modulation; One-dimensional Analysis, Int. Conf. Automatics and Informatics, Sofia, BUL- GARIA, （CD-ROM） pp.1-5, （2012.10）.

上田将誉，木村繁男，木綿隆弘，小松信義

固相成長初期段階における固液界面近傍での二重拡散対流，日本機械学会論文集（Ｂ編），Vol. 78, No.

793, pp. 1609-1619, （2012.9）.

Yamada,T. Kiwata,T., Kita,T., Hirai,M., Komatsu,N., Kono,T.

Overspeed Control of a Variable-Pitch Vertical- Axis Wind Turbine by Means of Tail Vanes, Jour- nal of Environment and Engineering, Vol. 7, No. 1, pp. 39-52, （2012.9）.

山本洋民，木村繁男，木綿隆弘，小松信義

鉛直管路内の層流片側冷却における非定常凝固特性

（第2報：流速変動に対する固層応答時間），日本機械学会論文集（Ｂ編），Vol. 78, No. 792, pp. 1397- 1408, （2012.8）.

Komatsu,N.

Time-Reversibility, Instability and Thermodynam- ics in N-body Systems Interacting with Long- Range Potentials, Procedia IUTAM, Vol. 5, pp. 151- 159, （2012.8）.

Kono,T., Kogaki,T.

LES Analysis of a Wind Turbine Wake Using an Actuator Disk Model, Proceedings of the 2012 World Congress on Advances in Civil, Environ- mental, and Materials Research （ACEM’12）, Seoul, KOREA, pp. 3124-3137 （CD-ROM）, （2012.8）.

Saitou,M., Kiwata,T., Kimura,S., Komatsu,N., Suginuma,J., Nomura,K.

Flow Visualization and Displacement Efficiency of Old Water in a Cylindrical Water Supply Tank, Visualization of Mechanical Processes, Vol. 1, 2011, Issue 4, （2012.5）.

Kono.T., Kogaki,T.

Numerical Investigation of Wind Conditions over a Rectangular Prism-shaped Building for Small Wind Turbine Siting, Wind Engineering, Vol. 36, pp. 111- 122, （2012.4）.

Sugawara,Y., Utanohara,Y., Kiwata,T., Nakamura,A., Kimura,S., Komatsu,N., Yamada,K.

Wall Shear Stress and Flow Field Measurements Downstream from an Orifice in a Circular Pipe, Proceedings of the 8th KSME-JSME Thermal and Fluids Engineering Conference, Incheon, KOREA, GSF30-002 （USB）, pp. 1-4, （2012.3）.

Hinomoto,H., Kiwata,T., Kimura,S., Komatsu,N.

Flow Characteristics of a Plane Jet with Deflectors Inside a Nozzle, Proceedings of the 8th KSME- JSME Thermal and Fluids Engineering Confer- ence，Incheon, KOREA, GSF28-010 （USB）, pp. 1-4,

（2012.3）.

Komatsu,N., Kiwata,T., Kimura,S.

Nonmonotonic Velocity-relaxation in an Evapo- ration-collapse Process of Self-gravitating Small N-body Systems, Abstracts of the International Workshop on Anomalous Statistics, Generalized Entropies, and Information Geometry （NEXT2012）, Nara, JAPAN, p. 51, （2012.3）.

Komatsu,N., Kiwata,T., Kimura,S.

Transition of Velocity Distributions in Collapsing Self-gravitating N-body Systems, Phys. Rev. E, Vol. 85, Issue 2, 021132, pp. 1-14, （2012.2）.

榎本啓士，野末浩隆，稗田登

画像分析を用いた局所接触型マイクロ波加熱式インジェクタによるエタノール噴霧に対する加熱効果の検証，日本機械学会論文集B編，印刷中，（2014）

野末浩隆，須摩貴嗣，榎本啓士，稗田登，寺岡喜和 Effect ofreactor diameter on the exchange ratio in the advanced-downdraft wood biomass gasifier,

(8)

Grand Renewwable Energy2014 Proceeding DVD, O-Bm-9-3, 2014

Lukas mangalla，榎本啓士，稗田登，寺岡喜和，野末浩隆

Numerical simulation of heating zone detailed structure in the local-contact microwave-heating injector, Grand Renewwable Energy2014 Proceed- ing DVD, O-Bm-7-4, 2014

Hiroshi Enomoto，Shogo Kunioka，Noboru Hieda, Behavior of Small Fuel Droplet near Butane Dif- fusion Flame, SAE Technical Paper 2013-32- 9123,2013

Enomoto Hiroshi，Shogo Kunioka，Noboru Hieda, 拡散火炎近傍でのキシレン / ヘキサデカン混合物による輝炎観察,自動車技術会論文集, Vol.45, No.2，

pp.253-258, 2013

Hiroshi Enomoto，Shogo Kunioka,

Observation of Luminous Flame with Fuel Droplet Array, SETC 2013 poster session, 2013

Hiroshi Enomoto，Hirotaka Nozue，Noboru Hieda, Effect of Generated Gas Component Fluctuation from Wood Biomass Gasifier on Small Spark Igni- tion Engine Speed, SETC 2013 poster session, 2013 Hiroshi Enomoto， Hirotaka Nozue，Noboru Hieda,

Effects of EGR on Knock-level of Small Spark Igni- tion Engine with Gasoline-base Kerosene-mixed Fuel, SAE Technical Paper, 2013-32-9123, 2013 Hiroshi Enomoto，Hirotaka Nozue，Noboru Hieda,

Effects of Spark Ignition Timing on Exhaust Gas Component and Temperature with Wood Biomass Gasifier, SAE Technical Paper 2013-32-9123, 2013 Lukas Mangalla，Hiroshi Enomoto，Noboru Hieda,

Spray Characteristics of Local-Contact Micro- wave-Heating Injector Fueled with Ethanol, SAE Technical Paper 2013-32-9123, 2013

Hiroshi Enomoto，Kosuke Nishioka，Shunsuke Sawasaki，Lukas Mangalla，Noboru Hieda,

Observation of Kerosene Droplet Evaporation under High Pressure and High Temperature Envi- ronment, SAE Technical Paper 2013-32-9123, 2013 Hiroshi Enomoto，Shogo Kunioka，Lukas Mangalla，

Noboru Hieda,

Small Kerosene Droplet Evaporation Near Butane Diffusion Flame, SAE Technical Paper 2013-32- 9116, 2013

Koji Matsumoto, Ko Sameshima, Yoshikazu Teraoka, Koji Furuya, Keisuke Murahashi, Keisuke Hayashi, Daisuke Shirai

Formation of ozone ice by freezing water contain- ing ozone micro-bubbles, International Journal of Refrigeration, Volume 36, Issue 3, pp. 842-851, 2013 寺岡喜和, 松本浩二, 加藤龍介, 林圭佑, 村端圭祐, 白井大介

金属箔ベルトを用いた板状氷連続製造装置，日本冷凍空調学会論文集 Vol. 30, No 2, pp. 147-154, 2013 浅岡龍徳, 熊野寛之, 岡田昌志, 村上賢吾, 五十嵐史雄,

寺岡喜和

氷粒子充填層の融解過程における水路形成に関する基礎的検討，日本冷凍空調学会論文集 Vol. 30, No. 1, pp. 43-55, 2013

Tran Thi Thu Huong, 榎本　啓士，

局所接触型マイクロ波加熱式燃料噴射装置における噴霧角とザウタ平均粒径に与えるバイオ燃料組成と燃料温度の影響，設計工学，Vol. 47, No. 1, pp. 49- 53，2012

Koji Matsumoto, Mitsuru Inuzuka, Yoshikazu Teraoka, Keisuke Hayashi, Keisuke Murahashi

Fundamental study on freezing characteristics of trehalose solution, International Journal of Refrig- eration, Volume 35, Issue 4, pp. 897-906, 2012 Koji Matsumoto, Musashi Akaishi, Yoshikazu Teraoka, Hiroyuki Inaba, Makoto Koshizuka

Investigation of method for measuring adhesion force of ice in nano/micro scale by using SPM, International Journal of Refrigeration, Volume 35, Issue 1, pp. 130-141, 2012

寺岡喜和, 松本浩二, 清水芳郎, 鮫島功

高濃度マイクロバブル水を用いた気泡含有氷の生成, 日本冷凍空調学会論文集, Vol 29, No. 2, pp. 317- 326, 2012

Hiroyuki Inaba, Koji Matsumoto, Yoshikazu Teraoka, Yoshito Igarashi

Investigation on influence of surfactant on ice adhesion force to cooling wall, Proc. of Eighth KSME- JSME Thermal and Fluids Engineering Conference

（TFEC8）, 2012

Yoshito Igarashi, Koji Matsumoto, Yoshikazu Teraoka, Hiroyuki Inaba

Investigation on influence of surfactant on super- cooling degree, Proc. of Eighth KSME-JSME Ther- mal and Fluids Engineering Conference （TFEC8）, 2012

M. Okada, A. Hosokawa, N. Asakawa, T. Ueda End milling of stainless steel and titanium alloy in an oil mist environment, International Journal of Advanced Manufacturing Technology, Vol.74, No.9, pp. 1255-1266, （2014.10）

A. Hosokawa, T. Ueda, N. Hirose, T. Furumoto High- quality machining of CFRP with high helix end mill, CIRP Annals, Manufacturing Technol- ogy, Vol. 63, No. 1, pp. 89-92, （2014.7）

Y. Ochiai, T. Furumoto, D. Kusunoki, T. Ueda, A. Hosokawa, T. Koyano

Internal Face Finishing Performance of Cooling Channel with Face Protuberance within Molding Die, Proc. of ICPE2014, pp. 86-86, （2014.7）

K. Mishima, A. Hosokawa, T. Kiwata, T. Ueda, T. Furumoto, T. Koyano

Studies on Reduction of Grinding Fluid in Cylindri- cal Plunge Grinding, Proc. of ICPE2014, pp. 617- 620, （2014.7）

A. Yoshida, M. Okada, T. Furumoto, H. Watanabe, N.

(9)

Asakawa

Wear Behavior of Diamond-coated End Mill in Cutting of Cemented Carbide, Proc. of ICPE2014, pp. 625-626, （2014.7）

R. Ogura, T. Furumoto, T. Ueda, A. Hosokawa, T. Koyano

Study on Reduction of Deformation of Consolidated Structure by Layered Manufacturing System, Optimization of Laser Scanning Method, Proc. of ICPE2014, pp. 74-77, （2014.7）

S. Henmi, T. Furumoto, A. Hosokawa, T. Koyano, T. Ueda

The Temperature Measurement of Human Enamel Surface during CO2 Laser Beam Irradiation, Proc.

of ICPE2014, pp. 275-278, （2014.7）

渡邊英人，岡田将人，吉田昭宏，古本達明，浅川直紀ダイヤモンドコートエンドミルによる超硬合金の切削加工，微小送りにおける切削機構の基礎的検討，

精密工学会誌, Vol. 80, No. 6, pp. 615-616, （2014.6）

古本達明，鷲塚大祐，細川　晃，上田隆司

軸付砥石によるセラミックス基複合材料の研削加工，ビトリファイドボンド砥石による高能率加工の実現，砥粒加工学会誌, Vol. 58, No. 6, pp. 380-385,

（2014.6）

M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa Melt Pool and Single Track Formation in Selec- tive Laser Sintering/ Selective Laser Melting, Ad- vanced Materials Research, Vol. 933, pp. 196- 201,

（2014.5）

M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa Consolidation Characteristics of SCM Based Metal Powder, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 8, No. 1, pp. 1-16,

（2014.4）

S. Tamaki, A. Hosokawa, T. Ueda, T. Furumoto Thermal Dressing of Metal Bonded Diamond Wheel by Nd:YAG Laser, Optimization of Air- jet Irradiation Angle, Proc. of LEM21, pp. 75-78,

（2013.11）

T. Hayashi, T. Furumoto, T. Ueda, A. Hosokawa Formation of Re-solidified Layer on the Surface of Dental Hard Tissue by Er:YAG Laser Irradiation, Proc. of LEM21, pp. 63-66, （2013.11）

D. Kusunoki, T. Furumoto, T. Ueda, A. Hosokawa Internal Finishing of Cooling Channel within Mold- ing Die Obtained by Additive Manufacturing, Proc.

of LEM21, pp. 59-62, （2013.11）

N. M. Abbas, M. Kunieda, T. koyano

Electrostatic Induction Feeding EDM by Control- ling the Duration of High Frequency Discharge, Proc. of LEM21, pp. 343-346, （2013.11）.

T. Furumoto, A. Koizumi, A. Hosokawa, T. Ueda Development of Permeability Measurement Sys- tem of Porous Structure Obtained by Additive Manufacturing, Proc. of ICMT2013, pp. 110-113,

（2013.10）

上田隆司，松永隆秀，古本達明，細川　晃，長友正平溝加工が施されたサファイアウエハのレーザ割断，

日本機械学会論文集（C編），Vol. 79, No. 805, pp.

3285-3289, （2013.9）

嶋村公二，細川　晃，伊部浩輔，上田隆司，政　誠一 PVDコーティング工具による難削材切削 ―TiAlN/

AlCrNコーティングエンドミルによるSUS304の乾式切削，砥粒加工学会誌, Vol.57, No.8, pp.536-541,

（2013.8）

T. Furumoto, T. Ueda, M. R. Alkahari, A. Hosokawa Investigation of Laser Consolidation Process for Metal Powder by Two-Color Pyrometer and High Speed Video Camera, CIRP Annals, Manufactur- ing Technology, Vol. 62, No. 1, pp. 223-226, （2013.7）

T. Koyano, M. Kunieda

Micro electrochemical machining using electrostatic induction feeding method, CIRP Annals, Vol.

62, No. 1, pp. 175-178, （2013.7）

M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa Consolidation Characteristics of SCM Based Metal Powder, Proc. of ICMDT2013, pp. 112. （2013.6）

R. Tanaka, A. Hosokawa, T. Furumoto, T. Ueda Wear Characteristics of Ceramic Tools When Turning BN Free-machining Steel, Journal of Ad- vanced Mechanical Design, Systems, and Manufac- turing, Vol. 7, No. 3, pp. 474-484, （2013.5）

R. Tanaka, A. Hosokawa, T. Furumoto, T. Ueda Effects of Tool Edge Geometry on Cutting Tem- perature in Continuous Cutting of Case Hardened Steel, International Journal of Automation Technol- ogy, Vol. 7, No. 3, pp. 313-320, （2013.5）

M. S. A. Aziz, T. Furumoto, T. Ueda, S. Takago, K. Kuriyama, S. Abe, A. Hosokawa

Reduction of Residual Stress inside the Consolidat- ed Structure Obtained by Layered Manufacturing Process, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 7, No. 2, pp. 244- 256, （2013.4）

Ultra-Short Pulse ECM using Electrostatic Induc- tion Feeding Method, Procedia CIRP, Vol. 6, pp.

390-394, （2013.4）

R. Tanaka, S. Yamazaki, A. Hosokawa, T. Furumoto, T. Ueda, M. Okada

Analysis of Cutting Behavior during Tapping and Measurement of Tool Edge Temperature Mea- sured by a Two-Color Pyrometer, Journal of Ad- vanced Mechanical Design, Systems, and Manufac- turing, Vol. 7, No. 2, pp. 115-124, （2013.3）

S. Henmi, T. Furumoto, T. Ueda, A. Hosokawa, T. Yamauchi

Study on Measurement of Laser Induced Dynamic Stress in the Suspension, The Influences of Powder Materials on Induced Dynamic Stress, Procedia CIRP, Vol. 5, pp. 74-78, （2013.1）

田中隆太郎，西本秀人，田中大輔，古本達明，細川　

(10)

晃，上田隆司

焼結鋼の旋削加工における工具刃先温度と仕上げ面粗さ，砥粒加工学会誌, Vol. 56, No. 12, pp. 819- 823, （2012.12）

M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa, R. Tanaka, M. S. A. Aziz

Thermal Conductivity of Metal Powder and Con- solidated Material fabricated via Selective Laser Melting, Key Engineering Materials, Vol. 523-524, pp. 244-249, （2012.11）

Electrochemical Micromachining Using Electro- static Induction Feeding Method, Key Engineering Materials, Vol. 523-524, pp.305-309, （2012.11）

R. Tanaka, A. Hosokawa, T. Furumoto, T. Ueda Cutting Performance of Ceramic Tools in Turning of Mild Steel, Key Engineering Materials, Vol. 523- 524, pp. 493-496, （2012.11）

田中隆太郎，岡田将人，中川智博，古本達明，細川　晃，上田隆司

複合機械加工による高品位面性状を有する表面改質層の生成，日本機械学会論文集（C編）, Vol. 78, No.

794, pp. 3605-3614, （2012.10）

古本達明，楠大樹，網野亨，細川　晃，田中隆太郎，

上田隆司

遊離砥粒を用いた金型内部冷却水管の仕上げ加工，

表面突起付加による曲線水管の加工性改善，砥粒加工学会誌, Vol. 56, No. 10, pp. 697-702, （2012.10）

T. Furumoto, T. Ueda, T. Amino, D. Kusunoki, A.

Hosokawa, R. Tanaka

Finishing Performance of Cooling Channel with Face Protuberance inside the Molding Die, Journal of Materials Processing Technology, Vol. 212, No.

10, pp. 2154-2160, （2012.10）

T. Furumoto, M. R. Alkahari, T. Ueda, M. S. A. Aziz, A. Hosokawa

Monitoring of Laser Consolidation Process of Metal Powder with High Speed Video Camera, Physics procedia, Vol. 39, pp. 760-766, （2012.10）

M. S. A. Aziz, T. Ueda, T. Furumoto, S. Abe, A. Hosokawa, R. Tanaka

Study on Machinability of Laser Sintered Materi- als Fabricated by Layered Manufacturing System, Influence of Hardness on Cutting Temperature, Procedia CIRP, Vol. 4, pp. 79-83, （2012.10）

M. Okada, N. Asakawa, M. Nikawa, Y. Fujita, A. Hosokawa, T. Ueda

Temperature measurement of cutting edge in drilling using drill reamer, Proceedings of the Tenth International Conference on Progress of Machining Technology, pp.253-256, （2012.9）

R. Tanaka, K. Shimanuki, A. Hosokawa, T. Furumoto, T. Ueda

Tool Edge Temperature in Tapping of Stainless Steel, Proc. of ICPMT2012, pp. 109-112, （2012.9）

T. Ishikawa, T. Ueda, T. Furumoto, A. Hosokawa,

R. Tanaka

Pre-Groove Development for Laser Cleaving of Brittle Materials by Using Micro-Lens, Journal of Advanced Mechanical Design, Systems, and Manu- facturing, Vol. 6, No. 6, pp. 841-848, （2012.8）

H. Nishimoto, R. Tanaka, A. Hosokawa, T. Ueda, T.

Furumoto

Development of Tool Edge Temperature Measure- ment Method in Wet Cutting, Application for CBN and Poly Crystalline Diamond Tools, Journal of Advanced Mechanical Design, Systems, and Manu- facturing, Vol. 6, No. 6, pp. 916-922, （2012.8）

Y. Yahagi, T. Koyano, M. Kunieda, X. D. Yang Micro Drilling EDM with High Rotation Speed of Tool Electrode Using the Electrostatic Induction Feeding Method, Procedia CIRP, vol.1, pp.162-165,

（2012.7）

M. S. A. Aziz, T. Furumoto, T. Ueda, S. Abe, A. Hosokawa, R. Tanaka

Study on Thermal and Strain Behavior in Selective Laser Sintering Process, Key Engineering Materi- als, Vol. 516, pp. 203-206, （2012.6）

Micro EDM by Stray-Capacitance-Coupled Elec- tric Feeding, Key Engineering Materials, vol. 516, pp.245-250, （2012.6）

Electrolysis Free Micro EDM in Water Using Electrostatic Induction Feeding Method, Journal of Advanced Mechanical Design, Systems, and Manu- facturing, Vol. 6, No. 6, pp. 800-807, （2012.6）

上田隆司，古本達明，藤江典久，細川　晃，田中隆太郎

2波長レーザを用いた硬脆材料のレーザ割断に関する研究，炭酸ガスレーザおよびEr:YAGレーザを用いた厚肉ガラスの精密切断，日本機械学会論文集（C 編）, Vol. 78, No. 788, pp. 1295-1304, （2012.4）

R. Monzen, S. Okawara and C. Watanabe

Stress-assisted nucleation and growth of γ” and γ’ precipitates in a Cu-1.2wt%Be- 0.1wt%Co alloy aged at 320^oC, Philosophical Magazine, 92（14）, pp. 1826-1843, （2012. 6）.

C. Watanbe and R. Monzen

Effects of microstructure on fatigue behavior of an Al-Mg-Sc alloy at an elevated temperature, Ma- terials Science Forum, 706-709, pp. 426-430, （2012.

7）.

横島大，井澤幸太朗，渡邊千尋，門前亮一

Cu-Ni-Co-Si合金の引張特性へのCoの影響, 銅と銅合金，51（1），pp. 138-142，（2012. 8）.

高川優作，辻内喜成，渡邊千尋，門前亮一，辻伸泰極低温圧延またはARB加工と時効析出によるCu- 1.4mass%Ni-0.25mass%P-0.1mass%Zr合金の強度向上, 銅と銅合金，51（1），132-137，（2012. 8）.

大河原祥一，倉澤元樹，渡邊千尋，門前亮一

負荷応力下におけるAl-4%Cu単結晶中のGP（1）

(11)

ゾーンの核生成と成長及びθ”, 軽金属，62（12）, 479-485, （2012. 12）.

Y. Takakawa, Y. Tsujiuchi, C. Watanabe, R. Monzen and N. Tsuji

Improvement in mechanical properties of a Cu- 2.0mass%Ni-0.5mass%Si-0.1mass%Zr alloy by com- bining both accumulative roll-bonding and cryo- rolling with aging, Materials Transactions, 51（1）, pp. 1-8, （2013. 1）.

辻内喜成，北　和久，渡邊千尋，門前亮一，辻伸泰極低温圧延と時効によるCu-1.4mass%Ni- 0.25mass%P-0.1mass%Zr合金の強度向上, 日本金属学会誌, 77（2）, pp. 55-58, （2013. 2）.

辻内喜成，北　和久，渡邊千尋，門前亮一

Cu-Ni-P合金の強度の改善, 銅と銅合金, 52（1）, pp. 126-130, （2013. 8）.

C. Watanabe, R. Monzen, S. Ii and K. Tsuchiya Microstructure and aging behavior of Cu-Be alloy processed by high-pressure torsion, Materials Sci- ence Forum, 783-786, pp. 2707-2712, （2014. 4）.

A. Ozawa, C. Watanabe and R. Monzen

Influence of Co on strength of Cu-Ni-Co-Si alloy, Mater. Sci. Forum, 783-786, pp. 2468-2473 （2014.

4）.

井澤幸太朗，小澤　敦，北和久，渡邊千尋，門前亮一

Cu-Ni-Co-Si合金の強度と組織に及ぼすCoの影響, 材料, 63（5）, pp. 401-408, （2014. 5）.

大西朗嗣，渡邊千尋，門前亮一，井誠一郎，土谷浩一 HPT加工を施したCu-Be合金の時効挙動と組織, 銅と銅合金, 53（1）, pp. 11-15, （2014. 8）.

小澤敦，渡邊千尋，門前亮一，村松尚国

Cu-21wt%Ni-5.5wt%Sn合金の耐応力緩和特性, 銅と銅合金, 53（1）, pp. 83-87, （2014. 8）.

小澤敦，渡邊千尋，門前亮一，村松尚国

Cu-21mass%Ni-5.5mass%Si合金の強度への加工熱処理の影響, 日本金属学会誌，78（9）, pp. 344-349,

（2014. 9）.

竹下智史，渡邊千尋，門前亮一，才川清二

Mg-Al系合金の不連続析出挙動とミクロ組織, 軽金属, 64（10）, pp. 470-475, （2014. 10）.

R. Monzen, R. Kawai and C. Watanabe

Effect of external stress on nucleation of ellipsoidal ω precipitates in a Ti-20wt%Mo alloy, Journal of Materials Science, 49（24）, pp. 8244-8250, （2014.

12）.

Tomoaki Iwai, Takahiro Go, Takaaki Miyata, and Yutaka Shoukaku: Relation Between Tribological Properties of Rubber and Surface Roughness Pa- rameters under Oil Lubrication, Proc. 3rd Malay- sia-Japan Tribology Symposium 2014 （MJTS2014）

Nov. 12-14 2014, Universiti Teknologi Malaysia, Kuala Lumpur, 2-2

Kenji Kuraishi, Tomoaki Iwai, and Yutaka Shoukaku:

Personal Authentication by Comparison of Ground Reaction Forces during Walking, 3rd Malaysia-Ja-

pan Tribology Symposium 2014 （MJTS2014） Nov.

12-14 2014, Universiti Teknologi Malaysia, Kuala Lumpur, 3-2

Kanae Yamamoto, Tomoaki Iwai, and Yutaka Shou- kaku: Frictional Properties of Laminated Compos- ite Materials of a-TCP-filled Poly （Vinyl Alcohol）

Hydrogels, 3rd Malaysia-Japan Tribology Sympo- sium 2014 （MJTS2014） Nov. 12-14 2014, Universiti Teknologi Malaysia, Kuala Lumpur, 4-2

Toshiaki Iwai, Toshihiko Ichihashi, Mitsugu Kudo, Masatoshi Miyagawa, Nobuyuki Katayama, and Tomoaki Iwai: Influence of Calsium Detergent on Wet Clutch Durability, Proc. 5th World Tribology Congress WTC 2013, 8-13 September 2013, To- rino,765.

Tomoaki Iwai, Kanae Yamamoto, Keisuke Asahara, and Yutaka Shoukaku: Mechanical and Frictional Properties of Laminated Alpha-TCP filled Polyvi- nyl Alcohol Hydrogel, Proc. 5th World Tribology Congress WTC 2013, 8-13 September 2013, Torino, 1273.

Hiroshi Kawachi, Tomoaki Iwai, and Yutaka Shou- kaku: Observation of Worn Surface of Silica-filled Styrene Butadiene Rubber Using Atomic Force Microscopy, 3^rd Thailand-Japan Rubber Sympo- sium, 10-14 March 2013, Hachioji, 100-101

Yusuke Minami, Tomoaki Iwai, and Yutaka Shou- kaku: Observation of Water Behavior in the Con- tact Area between Porous Rubber and a Mating Surface during Sliding, Tire Science and Technol- ogy, Vol. 40, Issue 3 （2012） 186-200.

Akihiro Takimi, Tomoaki Iwai, and Yutaka Shou- kaku: Measurement of Water Film Thickness Due to Sipe Edges of Studless Tires, Tire Science and Technology, Vol. 40, Issue 2 （2012） 108-123.

立矢宏，小塚裕明，滝澤健太，吉田博一

ロボットアームの受動関節を利用した人の位置決め補助に関する研究，日本機械学会論文集，80-820号，

DOI:10.1299/transjsme.2014trans0345, （2014.12）.

Higuchi M., Kawamura R., Tanigawa Y.

Magnetically induced stresses and deformations in a conducting solid subjected to a transient magnet- ic field, Proc. of the Fourth Asian Conference on Mechanics of Functional Materials and Structures, pp. 111-114, （2014. 10）.

Higuchi M., Adachi, T.

Dynamic Stress in Functionally-Graded Bar Sub- jected to Collision of Bar, Proc. of the Fourth Asian Conference on Mechanics of Functional Materials and Structures, pp. 115-116, （2014. 10）.

Oba A., Higuchi M., Tambo S, Tachiya H., Adachi, T.

Mechanical Properties of Soft Epoxy Resin for Flexible Protector, Proc. of the Fourth Asian Con- ference on Mechanics of Functional Materials and Structures, pp. 255-256, （2014. 10）.

Watanabe K., Okada M., Iwasaki T., Tachiya H.,

(12)

Kozuka H.

Consideration of the integrity of various free- curved surfaces burnished by a parallel mechanism type machine tool with force control, Proc.

of the 15th International Conference on Precision Engineering, P85, pp. 876-877, （2014. 7）.

Ishino Y., Tachiya H., Wakabayashi A., Kaneko Y., Nakagaki K., Kinoshita T.

Compensation system of thermal deformation for compact lathe by temperatures measured at a few points, Proceedings of the 15th International Conference on Precision Engineering, pp. 206-211,

（2014. 7）.

Umboh M.K., Adachi T., Nemoto T., Higuchi M., Major Z.

Non-Stoichiometric Curing Effect on Fracture Toughness of Nanosilica Particulate-Reinforced Epoxy Composites, Journal of Materials Science, Vol. 49, pp. 7454-7461, （2014. 7）.

小塚裕明，荒田純平，市川翔平，奥田憲司，翁長明範，

大野元嗣，佐野明人，藤本英雄

柔軟なばね関節を用いた多自由度コンプライアント

―パラレルメカニズムの光学部品位置決め装置への応用，日本ロボット学会誌，Vol.32, No.5, pp.481- 489, （2014. 7）.

Higuchi M., Suzuki S., Adachi T., Tachiya H.

Improvement of Energy Absorption of Circular Tubes Subjected to High Velocity Impact, Applied Mechanics and Materials, Vol. 566, pp. 575-580,

（2014. 6）.

Okada M., Kozuka H., Tachiya H., Iwasaki T., Yamashita Y.

Burnishing Processing by the Spherical 5-degrees Hybrid Type Parallel Mechanism with Force Con- trol, International Journal of Automation Technol- ogy, Vol.8, No. 2, pp.243-252, （2014. 3）.

立矢宏，伊谷英之，林道大，伊賀裕和，樋口理宏産業用ロボットのCP制御における動力学モデルを用いない最適軌道生成，日本機械学会論文集C編，

79-805号，pp 3075～3087, （2013. 9）.

立矢宏，平田紘規，須摩貴嗣，金子義幸，中垣勝敬，

石野嘉章

少数位置の温度測定による小型CNC旋盤の熱変形補正，日本機械学会論文集C編，79-804号，pp 2960～2974, （2013. 8）.

Adachi T., Oishi K., Higuchi M., Umboh M.K., Major Z.

Non-Stoichiometric Curing Effect on Dynamic Me- chanical Properties of Bisphenol A-Type Epoxy Resins, Journal of the Japanese Society for Experi- mental Mechanics, Vol. 13, pp. s148-s153, （2013. 7）.

吉村史也，喜成年泰，立矢　宏，高桑匡平

触覚センサを用いた織物表面特性の評価，日本機械学会論文集C編，79-802号，pp. 2116～2126, （2013.

6）.

Ise T., Higuchi M., Tachiya H.

Development of a tactile sensor to measure tire

friction coefficients in arbitrary directions, Interna- tional Journal of Automation Technology, Vol.7, No.

3, pp. 359-366. （2013. 5）.

Umboh M.K., Adachi T., Oishi K., Higuchi M., Major Z.

Mechanical Properties of Nano-Silica Particulate- Reinforced Epoxy Composites Considered in Terms of Crosslinking Effect in Matrix Resins, Journal of Materials Science, Vol. 48, pp. 5148-5156,

（2013. 3）.

Nakamoto H., Adachi T., Higuchi M.

Approximate Analysis of Progressive Deformation in Honeycomb Structures Subjected to In-Plane Loading, Archive of Applied Mechanics, Vol. 83, pp. 379-396, （2013. 3）.

Kozuka H., Arata J., Okuda K., Onaga A., Ohno M., Sano A., Fujimoto H.

A compliant-parallel mechanism with bio-inspired compliant joints for high precision assembly robot, The First CIRP Conference on Biomanufacturing, Procedia CIRP Vol.5, pp.175-178, （2013. 3）.

Adachi T., Higuchi M.

Impulsive Responses of Functionally Graded Ma- terial Bars due to Collision, Acta Mechanica, Vol.

224, pp. 1061-1076, （2013. 1）.

Higuchi M., Suzuki S., Adachi T.

Dynamic Axial Crushing of Circular Tubes Sub- jected to High Velocity Impact, Proc. of the Joint International Conference of The 2nd International Symposium on Experimental Mechanics, The 11th Asian Conference on Experimental Mechanics, 2012 Society for Experimental Mechanics Fall Con- ference and 7th International Symposium on Ad- vanced Science and Technology in Experimental Mechanics, Paper #A134, pp.1-6, （2012. 11）.

Adachi T., Oishi K., Higuchi M., Umboh M.K.

Non-Stoichiometric Curing Effect on Dynamic Me- chanical Properties of Bisphenol A-Type Epoxy Resin, Proc. of the Joint International Conference of The 2nd International Symposium on Experi- mental Mechanics, The 11th Asian Conference on Experimental Mechanics, 2012 Society for Ex- perimental Mechanics Fall Conference and 7th International Symposium on Advanced Science and Technology in Experimental Mechanics, Paper

#A129, pp.1-6, （2012. 11）.

Takeo K., Adachi T., Higuchi M. Tada H.

Dynamic Compression of Acrylic Thin Foam Films, Proc. of the Joint International Conference of The 2nd International Symposium on Experi- mental Mechanics, The 11th Asian Conference on Experimental Mechanics, 2012 Society for Ex- perimental Mechanics Fall Conference and 7th International Symposium on Advanced Science and Technology in Experimental Mechanics, Paper

#A132, pp.1-6, （2012. 11）.

Kozuka H., Arata J., Okuda K., Onaga A., Ohno M.,

(13)

Sano A., Fujimoto H.

Compliant-Parallel Mechanism for High Precision Machine with a Wide Range of Working Area, Proc. of the IEEE/RSJ International Conference on Intelligent Robots And Systems, pp.208-214, （2012.

10）.

小塚裕明，荒田純平，奥田憲司，翁長明範，大野元嗣，

佐野明人，藤本英雄

コンプライアントメカニズムを用いた円弧ばね関節を有するばね―パラレルメカニズムによる精密位置決め装置の開発，日本機械学会論文集C編,Vol.78, No.793, pp.3216-3227, （2012. 9）.

小塚裕明，荒田純平，奥田憲司，翁長明範，大野元嗣，

佐野明人，藤本英雄

コンプライアント―パラレルメカニズムを応用した高精度・広動作域位置決め装置，日本ロボット学会誌，Vol.30, No.7, pp.735-743, （2012. 9）.

Okawa M., Nagino H., Higuchi M., Adachi T., Mizusawa T., Mikami T.

Three-Dimensional Bending Analysis of Rectan- gular Thick Plates on Elastic Foundations using the B-spline Ritz Method, Proc. of the 2012 World Congress on Advances in Civil, Environmental and Materials Research, pp.3182-3196 （2012. 8）.

樋口理宏, 足立忠晴, 福島庸介，荒木稚子

軸衝撃を受ける変断面円筒のエネルギ吸収特性, 日本機械学会論文集A編, Vol. 78, No. 791, pp. 945- 954, （2012. 7）.

Higuchi M., Hamaguchi Y., Suzuki S., Adachi T.

Dynamic Behavior of Circular Tubes Subjected to High Impact Loading, Journal of the Japanese Soci- ety for Experimental Mechanics, Vol. 12, pp. s127- s132, （2012. 7）.

Higuchi M., Saka T., Fujimoto K., Adachi T.

Energy Absorption of Thin-Walled Circular Tube Filled with Syntactic Epoxy Foam Subjected to Axial Compression, Journal of the Japanese Society for Experimental Mechanics, Vol. 12, pp. s133-138,

（2012. 7）.

樋口理宏, 足立忠晴, 吉岡大志，横地雄斗

傾斜機能シンタクチックフォームの機械的特性分布評価, 日本機械学会論文集A編, Vol. 78, No. 790, pp.

890-901 （2012. 6）.

穴田賢二，宮崎祐介，丹冶和也，立矢　宏，放生明廣，

阪本雄一郎

三次元頭部実体モデルによる脳深部ひずみ分布の計測と脳形状因子の影響，日本機械学会論文集A編，

78-789号，pp 758～769, （2012. 5）.

樋口理宏，横地雄斗，足立忠晴

傾斜発泡エポキシ樹脂の一体成形法の評価, 日本機械学会論文集A編, Vol. 78, No. 789, pp.660-664,

（2012. 5）.

Kozuka H., Arata J., Okuda K., Onaga A., Ohno M., Sano A., Fujimoto H.

A Bio-Inspired Compliant-Parallel Mechanism for High Precision Robot, Proc. of the International

Conference on Robotics and Automation, pp.3122- 3127, （2012. 5）.

足立忠晴, 吉垣暢彦, 樋口理宏

傾斜機能性材料の縦衝撃問題の解析, 日本機械学会論文集A編, Vol. 78, No. 788, pp. 502-510, （2012. 4）.

立矢　宏，杉浦祐希，長瀬博毅，伊勢大成，藤田千陽，

澤藤和則

タイヤ接地路面の摩擦係数測定用触覚センサの基礎的研究，日本機械学会論文集C編，78-787 号，pp 852～862, （2012. 3）.

Tachiya H., Hirata H., Ueno T., Kaneko Y., Nakagaki K., Ishino Y.

Evaluation of and compensation for thermal deformation in a compact cnc lath, International Journal of Automation Technology,Vol.6, No. 2, pp. 137-146,

（2012. 3）.

Higuchi M., Toyamine F., Adachi T., Nagino H.

Generalized shear deformation theory for bending of inhomogeneous beams, Journal of Solid Mechan- ics and Materials Engineering, Vol. 6, pp. 351-360,

（2012. 3）.

名木野晴暢, 大川茉友子, 樋口理宏, 足立忠晴, 水澤富作, 三上隆

種々の面外荷重を受ける弾性基礎上にある厚肉平板の三次元応力解析, 構造工学論文集, Vol. 58A, pp.

26-39, （2012. 3）.

宮崎祐介，立矢　宏，放生明廣，阪本雄一郎

三次元透過頭部実体モデルによる後頭衝撃時の頭蓋骨・脳間相対運動の可視化，日本機械学会論文集A 編，76-785号，pp 106～ 115, （2012. 2）.

Higuchi M., Adachi T., Yokochi Y., Fujimoto K.

Controlling of Distribution of Mechanical Proper- ties in Functionally-Graded Syntactic Foams for Impact Energy Absorption, Materials Science Fo- rum, Vol. 706-709, pp. 729-734, （2012. 2）.

Adachi T., Higuchi M.

Fabrication of Bulk Functionally-Graded Syntactic Foams for Impact Energy Absorption, Materials Science Forum, Vol. 706-709, pp. 711-716, （2012. 2）.

T. Shimokawa, T. Oguro, M. Tanaka, K. Higashida, and T. Ohashi，“A Multiscale Approach for the Deformation Mechanism in Pearlite Microstruc- ture: Atomistic Study of the Role of the Heteroin- terface on Ductility”，Materials Science and Engi- neering: A, Vol. 598, PP, 68-76, （2014）.

木下惠介，下川智嗣，喜成年泰，澤田英明，川上和人，

潮田浩作，“非すべり応力がらせん転位のパイエルスエネルギーに与える影響”，日本機械学会論文集, Vol. 80, No. 809, pp. CM0018（1-10）, （2014）.

都留智仁，青柳吉輝，加治芳行，下川智嗣，“超微細粒金属の機械特性に対する粒内転位生成と粒界におけるすべり伝播の影響”，日本金属学会誌, Vol. 78, No. 1, pp. 45-51, （2014）.

T. Shimokawa and S. Kitada，“Dislocation Multi- plication from the Frank-Read Source in Atomic Models”，Materials Transactions, Vol. 55, No. 1,

(14)

pp. 58-63, （2014）.

T. Kinari, H.Tachiya, L. Wakako, H. Komiya

Hand Value using Friction Coefficients Measured by Rotationally Dragging Tactile Sensor, Proceedings of the International Symposium on Fiber Science and Technology 2014, Paper ID: PG4-04, 2 pages

（2014）.

NyiNyiHtoo, T. Kinari, T. Shimokawa, L. Wakako, K.

Ohta 3 - D Model for Tensile Simulation of Multi- filament Yarn, Proceedings of the International Symposium on Fiber Science and Technology 2014, Paper ID: PG4-03, 2 pages （2014）.

M. Matsumoto, Y. Matsumoto, H. Kanai, L. Wakako, K.

Fukushima

Construction of Twin Staple-Core Spun Yarn with Two Points of Yarn Formation in One Twisting Process, Text Res J, vol. 84, No.17, pp. 1858-1866

（2014）.

T. Watanabe, T. Iwai, Y. Fujihira, L. Wakako, H.

Kagawa, T. Yoneyama

Force Sensor Attachable to Thin Fiberscopes/En- doscopes Utilizing High Elasticity Fabric, Sensors, Vol.14, No.3, pp. 5207-5220 （2014）.

Y. Aoyagi, T. Tsuru, and T. Shimokawa，“Crystal Plasticity Modeling and Simulation Considering the Behavior of the Dislocation Source of Ultrafine- Grained Metal”，International Journal of Plastic- ity，Vol. 55, pp. 43-57, （2013）.

M. Tanaka, Y. Yoshimi, K. Higashida, T. Shimokawa, and T. Ohashi，“A Multiscale Approach for the Deformation Mechanism in Pearlite Microstruc- ture: Experimental Measurements of Strain Dis- tribution using a Novel Technique of Precision Markers”，Materials Science and Engineering: A，

Vol.590, pp. 37-43, （2013）.

T. Ohashi, L. Roslan, K. Takahashi, T. Shimokawa, M. Tanaka, and K. Higashida，“A Multiscale Ap- proach for the Deformation Mechanism in Pearlite Microstructure: Numerical Evaluation of Elasto- Plastic Deformation in Fine Lamellar Structures”，

Materials Science and Engineering: A，Vol.588, pp.

214-220, （2013）.

T. Tsuru, Y. Aoyagi, Y. Kaji, and T. Shimokawa，

“Influence of cpmpetition between intragranular dislocation nucleation and intergranular slip transfer on mechanical properties of ultrafine-grained metals”，Materials Transactions，Vol.54, No.9，

pp. 1580-1586，（2013）.

T. Shimokawa,“Influence of Interfacial Mechanical Properties on Elongation of Multilayered Compos- ite Metals”，Proceedings of International Confer- ence of Fracture, Paper ID: M13-019 in CD-ROM, 6 pages，（2013）.

T.Kinari, K.Takakuwa, H.Tachiya, L.Wakako, M.Matsudaira

Evaluation of Surface Characteristics of Fabrics by

Rotationally Dragging Tactile Sensor, Proceeding of the 42nd Textile Research Symposium at Mt.

Fuji, pp. 121-126 （2013）.

N.Kaneda, T.Hayamizu, T.Kinari, L.Wakako,

Evaluation of Apparent Yarn Thickness in Draw- ing False-twisted Yarn, Proceeding of the 42nd Textile Research Symposium at Mt. Fuji, pp. 185- 188 （2013）.

L. Wakako, H. Yoshikawa, T. Kinari, T. Shimokawa Evaluation of Aesthetic Properties of Pantyhose by Using Leg Model, Proceedings of the 42nd Tex- tile Research Symposium at Mt. Fuji, pp.189-191

（2013）.

吉村史也，喜成年泰，立矢宏，高桑匡平

触覚センサを用いた織物表面特性の評価：日本機械学会論文集C編，79，802C，pp. 2116－2126 （2013）.

若子倫菜, 松岡敏生, 松本陽一, 東義昭, 竹内康治廃棄コンニャク・グルコマンナンを活用した生分解性種苗育成用ポットの開発, J Text Eng, Vol.59, No.3, pp. 43-49 （2013）.

K. Kinoshita, T. Shimokawa and T. Kinari，“Grain Boundary Structure Dependence of Extrinsic Grain Boundary Dislocation Emission Phenomena: A Mo- lecular Dynamics Study”，Materials Transactions, Vol. 53, No.1, pp.147-155，（2012）.

下川智嗣，田中將紀，東田賢二，“内部欠陥応力場の発展に基づくき裂から粒界へ転位源が遷移する現象のひずみ速度依存性”，材料, Vol.61, No.2，pp.161- 166，（2012）．

K. Kinoshita, T. Shimokawa and T. Kinari, “Role of Grain Boundaries as Dislocation Source in Grain- Size Strengthening of Ultrafine Grained Metals”，

Proceedings of 4th International Conference on Computational Methods （ICCM 2012）, 4 pages，

（2012）.

T. Shimokawa, “Atomic Simulation of Grain Bound- aries as a Dislocation Source in Ultrafine-Grained Metals”，Proceedings of KSME-JSME Joint Sym- posium on Computational Mechanics & CAE 2012, pp. 53-55（2012）.

T. Shimokawa, M. Tanaka and K. Higashida, “Roles of Dislocation Emission from Grain Boundaries in Mechanical Properties of Bulk Nanostructured Metals”, Proceedings of the International Work- shop on Bulk Nanostructured Metals, pp. 27-34

（2012）.

M. Tanaka, K. Higashida and T. Shimokawa, “The Brittle-to-Ductile Transition in Bulk Nanostruc- tured Metals”，Proceedings of the International Workshop on Bulk Nanostructured Metals, pp.

15-20（2012）.

T. Tsuru, T. Aoyagi, T. Shimokawa and Y. Kaji,

“Atomistic Simulations of Activation Ability of Dislocation Source within Grain Boundary”， Pro- ceedings of the International Workshop on Bulk Nanostructured Metals, pp. 141-144（2012）.

(15)

Y. Aoyagi and T. Shimokawa, “Crystal Plasticity Simulation on Tension-Compression Asymmetry of Bulk Nanostructured Metals”， Proceedings of the International Workshop on Bulk Nanostruc- tured Metals, pp. 145-148（2012）.

N.Suganuma，Y.Hayashi

Development of Autonomous Vehicle - Overview of Demonstration in the ITS World Congress 2013 -，Proc. of the International Conference on Informatics in Control, Automation and Robotics, CD-ROM, 2014

菅沼直樹，魚住剛弘

自動車の自律走行のためのOccupancy Grid Maps に基づく全方位障害物検出，自動車技術会論文集，

Vol.44, No.3, pp.967-972，2013 菅沼直樹，魚住剛弘

自律走行自動車のためのデジタル地図に基づくパスプランニング，自動車技術会論文集，Vol.44, No.3, pp.961-966，2013

S.Koike, N.Suganuma

Preceding vehicle recognition for lead vehicle of fully automated platooning trucks based on multi- sensor fusion, Proc. of the 19th ITS World Con- gress, CD-ROM, 2012

N.Suganuma，T.Uozumi

Development of an autonomous vehicle -System overview of test ride vehicle in the Tokyo Motor Show 2011-, Proc. of the SICE Annual Conference, CD-ROM, 2012

H. Seki, Y. Kamiya, M. Hikizu, “Planar Manipulator with Mechanically Adjustable Joint Compliance”, Journal of Automation Technology, Vol.6, No.1, pp.46-52, 2012.1

H. Seki, H. Amakata, Y. Kamiya, M. Hikizu, “Devel- opment of Hydraulic Drive Drilling Robot with 4-DOF Tool for In-Pipe Repair - Mechanical De- sign of New Tool -”, Journal of Automation Tech- nology, Vol.6, No.2, pp.221-227, 2012.2

K. Salleh, H. Seki, “Edge Tracing of T-Shirt by Robot for Spreading Purposes”, Applied Mechanics and Materials, Vols.157-158, pp.1190-1194, 2012.2 Y. W. Leong, H. Seki, Y. Kamiya, and M. Hikizu,

“TRIBOACOUSTIC LOCALIZATION SYSTEM FOR MOBILE DEVICE - ENVIRONMENTAL EFFECTS TO ACCURACY -,” International Journal on Smart Sensing and Intelligent Systems, Vol.7, No.2, pp.658-673, 2014.6.

Y. W. Leong, H. Seki, Y. Kamiya, and M. Hikizu, “A feasibility study of utilizing tribo-acoustics for mobile user interface,” Proceedings of the 7th International Conference on Sensing Technology, pp.800-805, 2013.12.

X. Zhang, H. Seki, Y. Kamiya, and M. Hikizu, “Detec- tion of Human Position by Thermopile Infrared Sensors,” Proceedings of the 15th International Conference on Precision Engineering, pp.436-441,

2014.7.

K. Kato, H. Seki, Y. Kamiya, and M. Hikizu, “3D ob- stacle detection using 2D laser range sensor for powered wheelchair,” Proceedings of the 15th In- ternational Conference on Precision Engineering, pp.798-803, 2014.7.

Y. Horibe, H. Seki, Y. Kamiya, and M. Hikizu, “Au- tomation of cutting for block of piled gold leaves and papers,” Proceedings of the 15th International Conference on Precision Engineering, pp.806-811, 2014.7.

T. Abe, Y. Kamiya, H. Seki, M. Hikizu, “Designing Control System of Hybrid System”, Proceedings of 2014 IEEEE International Conference of ICMA, CD-ROM, 2014.8

Hirotaka Hiraguri and Hiroshi Tokutake, “Modeling of Dust Devil on Mars and Flight Simulation of Mars Airplane”, The 29th Congress of the Inter- national Council of the Aeronautical Sciences, Sep.

7-12, 2014, St. Petersburg, Russia, Proc. 2014_0099.

Atsumu Ohmae, Hiroshi Tokutake Eiji Itakura, Shinnosuke Shimokawa, “Morphing Device with Weaved Strips Structure and Application to Ve- hicle Body”, FISITA 2014 World Automotive Con- gress, Jun. 2-6, 2014, Maastricht, The Netherlands, Proc. F2014-AST-026.

Hiroshi Tokutake, Youichi Sugimoto and Tetsuro Shirakata, “Real-time Identification Method of Driver Model with Steering Manipulation”, Vehicle System Dynamics,Vol. 51, Issue 1, pp.109-121, 2013.

Hiroshi Tokutake, Shuichi Okada and Shigeru Su- nada, “Disturbance Preview Controller and Its Application to a Small UAV”, Transactions of the Japan Society for Aeronautical and Space Sciences, Vol. 55, No. 1, pp.76-78, 2012.

Tokutake, Hiroshi Tsukada, Taro and Itakura, Eiji,

“Vehicle Control via Real-Time Flow Modeling and Flow Manipulation”, FISITA 2012 World Au- tomotive Congress, Nov. 27-30, 2012, Beijing, China, Proc. F2012-F08-003.

Kenjiro Okumura and Hiroshi Tokutake, “The Flap- ping Aircraft Dynamics with Wing Deformation under Gust Input”, The 28th Congress of the Inter- national Council of the Aeronautical Sciences, Sep.

23-28, 2012, Brisbane Australia, Proc. ICAS2012- 11.9.2.

米山猛, 伊藤拓実, 増澤健太, 立野大地, 西原嘉隆, 守安隆史, 長島重憲, 岡本雅之, 根田崇史, 熱可塑性炭素繊維織物シートを用いた半球状カップのプレス成形，塑性と加工（日本塑性加工学会誌） Vol.55, No.636, pp.23-27, 2014

T. Watanabe, R. Maruyama, M. Uchida, Delicate Food Grasping by Robotic Gripper with Viscoelas- tic Fluid-based Deformable Fingertips, Transac- tion on Control and Mechanical Systems, Vol.3, No.3, pp. 2014.

(16)

T. Watanabe, T. Yoneyama, H. Hayashi, and Y. To- ribatake, Identification of the Causative Disease of Intermittent Claudication through Walking Motion Analysis: Feature Analysis and Differentiation, The Scientific World Journal, Vol.2014, Article ID 861529, 10 pages, 2014.

T. Iwai, Y. Fujihira, L. Wakako, H. Kagawa, T. Yo- neyama, and T. Watanabe, Three-axis force visual- izing system for fiberscopes utilizing highly elastic fabric, Proceedings of the IEEE/ASME Interna- tional Conference on Advanced Intelligent Mecha- tronics （AIM）, 2014.

T. Watanabe, Y. Fujihira, Experimental investigation of effect of fingertip stiffness on friction while grasping an object, Proceedings of the IEEE Inter- national Conference on Robotics and Automation

（ICRA）, 2014.

T. Watanabe, S. Furuya, Touchscreen User Motion Anticipation for Usability Improvement, Proceed- ings of the Seventh International Conference on Advances in Computer-Human Interactions

（ACHI）, pp.264-270, 2014.

Y. Fujihira, T. Hanyu, Y. Kanada, T. Yoneyama, T.

Watanabe and H. Kagawa, Gripping Force Feed- back System for Neurosurgery, International Jour- nal of Automation Technology, Vol.8, No.1, pp.83- 94, 2014.

藤平祥孝, 内田真裕,渡辺哲陽: 物体把持における指先剛性の摩擦力への影響, ロボティクスシンポジア論文集, pp.288-293, 2014．

K. Tanaka, T. Yoneyama, T. Watanabe, H. Kagawa, Y. Fujihira, T. Hanyu, Y. Kanada, Y. Hayashi, M.

Nakada, Design of Flexible Micro Manipulator for Neurosurgery, Proc. of Int. Conf. on Precision Engi- neering, 2014

M. Kimura, T. Yoneyama, D. Tatsuno, S. Hineno, K.

Shiozaki, T. Moriyasu, M. Okamoto, S. Nagashima, Press Forming of CFRTP Sheet for High-Cycle Production, Proc. of Int. Conf. on Precision Engi- neering, 2014

R. Maruyama, T. Watanabe, M. Uchida, Delicate Grasping by Robotic Gripper with Incompressible Fluid-based Deformable Fingertips, Proceedings of the IEEE/RSJ International Conference on Intel- ligent Robots and Systems （IROS）, 2013.

T. Watanabe, Effect of visual cues on line drawing performance, Proceedings of IEEE International Conference on System, Man and Cybernetics

（SMC）, pp.3561-3566, 2013.

T. Yoneyama, T. Watanabe, H. Kagawa, J. Hamada, Y.

Hayashi, M. Nakada, Force-detecting gripper and force feedback system for neurosurgery applications, International Journal for Computer Assisted Radiology and Surgery, Vol.8, No.5, pp.819-829, 2013.

T. Watanabe, T. Yoneyama, Y. Toribatake and H.

Hayashi, Main disease classification of intermittent claudication via L1-regularized SVM, Proceedings of International Conference of the IEEE Engineer- ing in Medicine and Biology Society （EMBC）, pp.6409-6412, 2013.

T. Katahira, T. Yoneyama, T. Feng, T. Watanabe, H. Kagawa, J. Hamada, Y. Hayashi, M. Nakada, Discrimination of a Brain Tumor Region through Microscale Evaluation of Fluorescence Using Con- focal Microscopy, Proceedings of International Con- ference of the IEEE Engineering in Medicine and Biology Society （EMBC）, 2013.

内田真裕，渡辺哲陽，丸山量志, 非圧縮性流体指からなるロボットハンドによる壊れやすい対象物の把持, 日本ロボット学会誌, Vol.31, No.8, pp.747-754, 2013．

Y. Kanada, T. Yoneyama, T. Watanabe, H. Kagawa, N.

Sugiyama, K. Tanaka, T. Hanyu , Force feedback manipulating system for neurosurgery, Procedia CIRP, pp.133-136, 2013．

山下裕司，藤平祥孝，米山猛，渡辺哲陽，香川博之，

濵田潤一郎，林裕，中田光俊, 脳腫瘍摘出手術のための力検出多自由度微細マニピュレータの開発, 生体医工学, Vol.50, No.4, pp.329-339, 2012.

P. Fungtammasan and T. Watanabe, Grasp input optimization taking contact position and object information uncertainties into consideration, IEEE Transactions on robotics, Vol.28, No.5, pp.1170- 1177, 2012.

栂野浩太郎，米山猛，濱田潤一郎，林裕，中田光俊，

渡辺哲陽，香川博之, 脳腫瘍識別を目指した共焦点顕微鏡による腫瘍観察, 生体医工学, Vol.50, No.1, pp.50-67, 2012.

T. Yoneyama, T. Watanabe, H. Kagawa, J. Hamada, Y.

Hayashi, M. Nakada, Force detecting gripper and force feedback system for neurosurgery, Proceed- ings of international congress and exhibition on computer assisted radiology and surgery （CARS）, 2012.

T. Watanabe, T. Yoneyama, Y. Toribatake, H. Hayas- hi and N. Yokogawa, Study on differentiation fac- tors for main disease identification of intermittent claudication, Proceedings of International Confer- ence of the IEEE Engineering in Medicine and Bi- ology Society （EMBC）, pp.4696-4699, 2012.

N. Yokogawa, Y. Toribatake, H. Murakami, H. Hayas- hi, T. Yoneyama, T. Watanabe and H. Tsuchiya, Evaluation of differences in the gait characteristics of patients with lumbar spinal canal stenosis （L4 radiculopathy） and osteoarthritis of the hip by using a new motion analysis method, Proceedings of EuroSpine, 2012.

米山猛，寺岡達也，増澤健太，西原嘉隆，長島重憲，

吉田春夫，熱可塑性炭素繊維シートのプレス成形，

塑性と加工，Vol.53,No.613,145-149，2012.

T. Yoneyama, S. Abe, M. Miyamaru, Reduction of

機械工学系機械工学系機械工学系

機 械 工 学 系

機械工学系