• 検索結果がありません。

LED Lighting Driver Solution

N/A
N/A
Protected

Academic year: 2022

シェア "LED Lighting Driver Solution"

Copied!
12
0
0

読み込み中.... (全文を見る)

全文

(1)

LED Lighting Driver Solution

(2)

Why LED Lighting ?

20% of Global Energy is used for Electricity Generation

Over 25% of a Building Energy Consumption is used for Lighting

With LED Lighting adoption can save 40% of lighting

electricity in 2030

(3)

LED Lighting App./Market

Non- Phase-Cut Dimming

Low Power

• Smart bulb

• Tubes

• Down light

Mid Power

• Down light

• Flat light

• Ceiling light

• Tubes

• Outdoors

High Power

• Troffers

• Street light

• Flood light

• Outdoors

Non Dimming

60W

25W

Segments Phase-Cut Dimming

(4)

LED Lighting Power Topology Solution

Non- Phase-Cut Dimming

Low Power

• Smart bulb

• Tubes

• Down light

Mid Power

• Down light

• Flat light

• Ceiling light

• Tubes

• Outdoors

High Power

• Troffers

• Street light

• Flood light

• Outdoors

Non Dimming

60W

25W

Segments Phase-Cut Dimming

Switchers Single Stage Non-isolation PWM controllers BD

Phase-Cut Dimmer (Optional)

BD

Direct AC Driver IC Phase-Cut

Dimmer

BD Switchers

Power Transformer Phase-Cut Dimmer

(Optional)

Single Stage PWM Non-Dim.

Phase-cut Dim.

Non-Phase-cut Dim BD

Boost MOSFET Switches

PFC Controllers LS_Gate

Drivers

Primary MOSFET Switches

HS/LS_Gate Drivers

PFC/PWM Combo Controllers

Switchers

Opto- couplers

Voltage Reference Power Transformer

DC-DC CC Controllers

LDOs/

Linear Regulators

MCU/

Communication Chipset Secondary

MOSFET Switchs

Current Reference PWM/PFM

Controller

BD

Single- Stage

PFC PWM

Trans.

DC-DC CC Controllers

LDOs/

Linear Regulators

MCU/

Communication Chipset Secondary

MOSFET Switchs Load Scalable

Dim. Controller MCU

0-10 Dimming Wall Switch

Step Dimming

Light/ Occupancy Sensor

Wireless Control Wired Control AC-DC PSR/SSR

PWM Controller

Output Scalable Load management with PWM Dimming

2 Stage Smart Light

NFC Reader

Single Stage Non-Isolated Topology Direct AC LED Driver

Single Stage Isolated Topology

Single Stage/ 2 stage Isolated Topology Multiple stage Isolated Topology

(5)

Direct AC LED Driver Solution

Accurate LED CC regulation: <±1%

Workable for Constant Powerregulation

Selectable LED Channel counts

High PF & Low THD : >0.99 / <10%

Proprietary Active PC Dimmer Control Tech.

Wide Analog Dimming range: 5~100%

HV Startup Current Source

Protections

- Input Over Voltage Protection - RCS Short Protection

- Thermal Shutdown

Excellent Light Uniformity

High Design Flexibility

Easy Power Scalability5~300 W

Overpass global standard

Excellent Phase-cut dimmer Compatibility

Flexible Smart Lighting Design

Fast start up & Low eBOM

High System Reliability

AC Input

FB

VIN

OUT

GND HV

BLD

DIM

VDD Option for phase-cut dimming

CS NC

Analog dimming signal

ON’s System IP

LED Light - PAR, Down, Tube, Flat, Ceiling, Flood, High Bay, Street Light - Non-Dimming, Phase-Cut Dimming

- Analog Dimming (0-10)

NCL30170ADR2G VDIM: 0 - 3V 10 SOIC

NCL30170BDR2G VDIM: 0 - 1.5V 10 SOIC

Key Features Benefits

Market & Applications

Ordering & Package Information

NCL30170 Power scalable/Wide Dimmable AC LED driver IC

(6)

Phase-Cut Dimming Solution

FL7734 Universal Input Phase-Cut Dimming Single Stage PSR Controller

Evaluation Boards and Design Tools Available

Universal Input Φ-cut Dim.

Controllable IIN min.

Controllable Dimming curve

<± 1% Line regulation PSR Control

RCS short and open protec.

Universal input design

Meet SSL7A & EnergyStar

Good light uniformity and Low BOM

High system liability

Key Features Benefits

Other Features

High PF, Low THD : >0.9 / <20

Fast < 0.3 s Start-up (@ Small phase angle)

LED Short Protection (SCP)

LED Open Protection (OVP-VS, OVP-VDD)

Output Diode Short Protection (OCP)

Over Temperature Protection (TSD)

Market & Applications

Phase-Cut Dimming LED Light

A19, PAR30/38, Down Light

Indoor Flat, Ceiling light

Ordering Part Number Package

FL7734MX 16SOIC

Ordering & Package Information

(7)

Step Dimming Driver with Mechanical Wall Switch

NCL30185 Step Dimmable QR PSR Current Mode Controller for LED Lighting

Precise current regulation accuracy (±2% typical)

Quasi-resonant control

Adjustable thermal foldback

3 Step Dimmable (70/25/5%)

Programmable OVP

Avoids over specifying LEDs to achieve lumen output

Higher efficiency

Improved driver reliability

Triac Dimmer Not Required

User can set over voltage protection level

Key Features Benefits

Other Features

Current control insensitive to normal transformer variation

Wide Vcc range (9.4-26 Vdc) to support extend VF range

Output diode and shorted winding protection

Cycle-by-cycle current limiting

Open LED and shorted output protection

Built-in Vcc overvoltage protection

Market & Applications

LED Bulbs and tubes

LED Drivers

LED Luminaires

Ordering & Package Information

Ordering Part Number Protections Package NCL30185ADR2G Latched Fault 8 SOIC NCL30188BDR2G Auto Recoverable 8 SOIC

(8)

Non-Phase-Cut Dimming Single Stage Solution

Integrated 700 V HV Startup

Precise current regulation accuracy (<±2%

typical)

Precise voltage regulation accuracy (<±1%

typical)

PF(>0.95)/THD(<10%) @ Univ.

Quasi-resonantcontrol

Standby Mode

Optional PSR/SSRmode

Excellent Dimming features - Dimming curve: Linear/Quadratic -ADIM: Analog IOUTwith VDC

PWM IOUTwith VPWM -PDIM: Analog IOUTwith VPWM

- Optional Min. Dim. Clamping(0/1/5/8%) - DIM CV Mode

Protections

- BO/ Line OVP/ VCCOVP - LED Open/ short protection - Winding / Diode short protection - TSD

Fast startup, low Pstdby

Constant brightness

Aux. power supply for MCU & cold start up

Exceeds global standards

Higher efficiency

PIN: < 150 mW

Design flexibility

Design flexibility

Supports “Smart” Lighting

Use opto. Instead of pulse trans.

Deep dimming features

Vcc supply for Smart lighting MCU

High system reliability

Key Features Benefits

Market & Applications

Analog/PWM Dimmable LED Driver

Ordering Part Number Features Package NCL30486A2DR2G 1% Dim clamp 9 SOIC

NCL30486 Smart-Dimmable CC/CV PSR Controller

(9)

Non-Dimming Single Stage Solution

NCL30488 Singe Stage CC/CV PSR controller

Integrated 700 V HV Startup

Precise current regulation accuracy

(<±2% typical)

Precise voltage regulation accuracy

(<±2% typical)

PF(>0.95)/THD(<10%) @ Univ.

Quasi-resonant control

Standby Mode

Optional PSR/SSR mode

Protections

- BO/ Line OVP/ VCC OVP - LED Open/ short protection - Winding / Diode short protection - TSD

Fast startup, low Pstdby

Constant brightness

Aux. power supply for MCU &

cold start up

Exceeds global standards

Higher efficiency

PIN: < 150 mW

Design flexibility

High system reliability

Key Features Benefits

Market & Applications

Non Dimming LED Light

Ordering & Package Information

Ordering Part Number Features Package

NCL30488A2DR2G BO: 138 V 7 SOIC

NCL30488A3DR2G BO: 108 V 7 SOIC

(10)

LED Panel Lighting Solution

NCL30125 2SW forward controller for low Vout/ high Iout LED load

Adjustable frequency upto 300KHz

Internal 700 V high side gate driver

+0.9/-1.2 A high & low side gate driver

Internal 700 V HV startup current source

Dynamic Self Supply (DSS)

Skip cycle mode

Jittering function

2 Switch Forward optimal design

Save external pulse transformer

High power driving capability

Fast startup & Low standby power

Stable operation in transient & no load.

Real no load operation

Good EMI performance

Key Features Benefits

Market & Applications

Lighting Advertisement power board - 2SW Forward converter

Power Supplies for Power tool charger, PC Silver Boxes, Games Adapter

Ordering & Package Information

Ordering Part Number Features Package

NCL30125A2DR2G Latch 14 SOIC

NCL30125B2DR2G AR 14 SOIC

M2

FB

Rcomp Vcc

0 0

Rbias EMI

Filter

0

U114 M3

VBulk

HB

FW Rbo_l

Ccs

HB

FB

0

0 Cboot

Sense

Cbo

Aux M1

FW

Rrt

Rupper

Laux

Rlower VBulk

GND

DRV_LO

0 T1

1 2

3

Rbo_h

Cpole

U113

Czero +Cout Lout

1 2

DRV_LO

Css +

Cv cc DRV_HI

Output

1 2

Rsense

Sense DB1

+ 1 - 2 AC2 3

AC1 4

GND DRV_HI

Rled Input

1 2

U115

NCL30125 1 HV

FAULT 3 4 BO 5 FB 6 RT 7 SS 8 FW

CS 9 VCC 10 GND 11 DRV_LO 12 DRV_HI 14 HB 15 BOOT 16

Vcc + Cbulk

Other Features

Design Flexibility

35 V wide VCC operation

Adjustable operating frequency & soft start duration

Optional features (Skip threshold, BO level, OCP timer & etc.)

Auto-recovery or Latch option

Robust system operation

Brown-out, OCP(SCP/OLP), VCC OVP, TSD,

Dedicated Fault pin for OVP or OTP detection

(11)

Multiple Power Stage Solution – Flyback+Buck

FL7740 (Single Stage CV PSR PWM IC) + FL7760 (Wide ADIM Buck PWM IC)

FL7740

AC Input

COMV N.C

GND VS HV

CS GATE VDD

PF BIAS

FL7760

DIM VDD VIN

GND OUT SEN

MCU

Analog / PWM signal

AC-DC PFC CV PSR Flyback DC-DC CC Buck

SOP-10

SSOT-6L

0-10 DIM.

PWM DIM.

Aux. Power Connectivity

Module

50 W – 2Ch. Buck EVB Available

FL7740 Single Stage CV PSR Controller

• Precise CV regulation: <±2%.

• Fast line/load transient response: <±10%.

• Low Standby Power consumption: <0.15W at no-load.

• >0.9 PF at Half load & 305VAC condition

FL7760 70 V CCM Dimmable Buck Controller

• Input voltage range: 8 VDC ~ 60VDC

• Wide Dimming Range

• Analog: 5~100%.

• PWM: 1~100% (@2KHz)

Market & Applications

Smart Luminaries

Low profile Power Supply

(12)

Multiple Power Stage Solution – Boost PFC + LLC HB

NCL2801 (Ultra low THD CrM Boost) + NCP13992 (Current Mode LLC controller)

150 W EVB

NCL2801 CrM PFC Controller

• Valley Count Frequency Foldback for high efficiency

• Daynamic Response Enhancer for lower undershoot

• Soft/Fast OVP for lower overshoot

• THD Enhancer for < 10% THD

NCP13992 Current Mode LLC half bridge controller

• Built-in 600V/1A H/B driver

• High Frequency 50 KHz to 750 KHz

• Light Load Mode for standby power

• < 30 mW off-mode

• < 100 mW No Load

• Quiet Skip Mode for less audible noise

Market & Applications

Smart Luminaries

Non-Dimmable LED driver

参照

関連したドキュメント

• Primary Side Constant Current Control: thanks to a proprietary circuit, the controller is able to take into account the effect of the leakage inductance of the transformer and

The FAN5702 is a white LED driver system based on an adaptive 1.5x charge pump capable of supplying up to 180 mA of total output current.. The tightly matched current sinks

Version NCL30060B2 is intended for constant voltage (CV) regulated output drivers where a DC−DC converter or linear regulator in the second stage controls the current to the LEDs so

For precise and reliable internal reference for input voltage signal, the FL7701 uses a digital technique (sigma/delta modulation) and creates a new internal signal (DAC_OUT) that

The EN/DIM logic input supports the device enable and a digital dimming interface for setting the LED channel current with 32 linear dimming levels.. LEDs can be powered directly

Three independent control inputs PWM1, PWM2, PWM3, control respectively LED1, LED2, LED3 channels.. The device also includes an output enable (OE) control pin to disable all

The output current can be estimated using the peak drain current and inductor current discharge time because output current is the same as the average of the diode current in

♦ Output Short−circuit protection: if the ZCD pin voltage remains low for a 90−ms time interval, the controller detects that the output or the ZCD pin is grounded and hence,