Product information W190T The convenient reliable proximity switch precisely the right one for challenging applications en IM0005078
全文
関連したドキュメント
A dedicated Current Sense pin provides precision analog current monitoring of the output as well as fault indication of short to V D , short circuit to ground and OFF state open
♦ Output Short−circuit protection: if the ZCD pin voltage remains low for a 90−ms time interval, the controller detects that the output or the ZCD pin is grounded and hence,
• Short−circuit protection: by monitoring the CS pin voltage when it exceeds 1 V (maximum peak current), the controller detects a fault and starts an internal digital timer.. On
Once the voltage on this V CC capacitor reaches the V CC(on) level (typically 9.0 V), the current source turns off and pulses are delivered by the output stage: the circuit is
Figure 31. Figure 32 shows an undervoltage lockout circuit applied to a buck regulator. A version of this circuit for buck−boost converter is shown in Figure 33. Resistor R3 pulls
Housed in a PDIP−7 or SOT−223 package, the NCP1015 offers everything needed to build a rugged and low−cost power supply, including soft−start, frequency jittering,
Once the 6.5 V threshold is reached, the Power Switch Circuit is disabled and the startup regulator is enabled to charge the V CC capacitor.. The Power Switch is enabled again once
原則合意され、詳 細については E&Tグループに て検討されるこ ととなった。.. fuel shut-off valve is closed, and installed batteries are protected from short circuit; or