第85類 電気機器及びその部分品並びに録音機、音声再生 機並びにテレビジョンの映像及び音声の記録用又 は再生用の機器並びにこれらの部分品及び附属品
Chapter 85 Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
The upper limit for the operating temperature has been established for the insulation of internal wiring and power cables used in electrical appliances.. "Upper limit for the operat[r]
600V heat resistant flame retardant irradiated polyethylene wire Furukawa standard specification DTS 1010 古河標準仕様書:DTS 1010
■ APPLICATION
Lead wire for equipment (motor, etc.), wiring for lighting appliances, refrigerating equipment, control panel, and other electric equipment.
In compliance with the Electric Appliance and Material Safety Law, the cable to be used in the TV receivers and portable cameras must be registered in terms of its vertical flame retardant characteristic. The cable types thus registered are shown in the table below. The "-F-" mark is provided to the cable surface or to a tag for the brand with vertical registered flame retardant characteristic. -F- マーク(電気用品の難燃性)登録
5.2.2.2.3 機器の筐体が一部金属、一部絶縁材料で出来ており、さらに取っ手が絶縁材料ならば、
金属箔を取っ手 B 及び D に巻き付けること(図 8b)。機器の筐体がモータの位置する場所で 、 非金属
である場合は、モータの固定子の鉄心部がある位置の筐体 C のまわりか、もし、ギヤボックスが絶縁 材料で(筐体 C のまわりに巻くよりも)高い妨害波端子電圧を持つならば、代わりに、そのギヤボッ クスのまわりに、幅 60 ㎜の金属箔を巻き付けること。筐体の金属部 A 点、取っ手 B 及び D のまわり に巻いた金属箔、及び筐体 C の上につけた金属箔は、一括して RC 素子の端子 M に接続すること。