• 検索結果がありません。

Directions for Use Brandt Pesticide Equipment Cleaner

N/A
N/A
Protected

Academic year: 2022

シェア "Directions for Use Brandt Pesticide Equipment Cleaner"

Copied!
1
0
0

読み込み中.... (全文を見る)

全文

(1)

Specimen Label

Ingredients:

Potassium hydroxide, Anticorrosion compounds, Sequestering agents, Nonionic and Ionic

surfactants, Polydimethylsiloxane

Directions for Use

BRANDT PESTICIDE EQUIPMENT CLEANER will remove and deactivate residual pesticide contamination from storage tanks and spray equipment. Use before changing from one pesticide to another, or before storing equipment.

For most pesticides: Use 1 to 2 pints per 50 gallons of water. Close valves to boom and nozzles. Use bypass or mechanical agitation to circulate solution throughout spray system. Use hose or hand boom to ensure solution will contact all contaminated surfaces of sprayer not submerged in the solution. Maintain solution contact for at least 15 minutes. When tank is cleaned, flush the cleaning solution through pump, all hoses, valves and nozzles.

For residues of phenoxy (2,4-D, etc.), sulfonyl urea or other highly active herbicides: Use 1/2 gallon per 50 gallons. Use hot water if possible. Maintain solution contact for at least one hour as above. Before using equipment, test final rinsate on the foliage of a sensitive plant, such as tomato or cotton.

If phytotoxicity occurs within 48-72 hours, repeat cleaning.

For steam cleaning equipment: Use 1 quart per 30 gallons of tank capacity.

For backpack or hand held sprayers: Use 1/2 to 1 1/2 oz. per gallon of water. Use higher rate for highly active herbicides as noted above. Agitate solution to ensure contact with all internal surfaces then spray through the hand wand for 1 to 2 minutes. Repeat with clear water.

Always rinse equipment after cleaning to remove alkaline residues before applications of organophosphates, carbamates or other materials degraded by highly alkaline solutions. Rinse water pH should not exceed source water by more than 0.5 pH units.

Aluminium equipment may be attacked by highly alkaline solutions. Do not allow aluminium parts to be in contact with concentrated solutions of BRANDT PESTICIDE EQUIPMENT CLEANER for longer than one hour. Also avoid prolonged contact with painted surfaces.

DANGER: Harmful if swallowed. Causes severe skin burns and eye damage.

Precautionary Statements

Do not breath mist or vapor. Wash thoroughly after handling.

Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection.

First Aid

If in eyes: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do.

Continue rinsing. Immediately call a poison center/doctor.

If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.

If swallowed: Rinse mouth. Do NOT induce vomiting.

If inhaled: Remove person to fresh air and keep comfortable for breathing.

Storage and Disposal

Do not contaminate water, food or feed by storage or disposal. Keep out of reach of children. Store locked up.

Dispose of contents/container in accordance with local regulations.

Warranty: Seller warrants that the product conforms to its chemical description and is reasonably fit for the purpose stated on the label when used in accordance with directions under normal conditions of use; but neither this warranty nor any other warranty of merchantability or fitness of a particular product expressed or implied, extends to the use of this product contrary to label conditions, or under conditions not reasonably foreseeable to the seller; and buyer assumes the risk of any such use.

NET CONTENTS: 1 QUART (946 mL)

Manufactured by:

Brandt Consolidated, Inc.

2935 South Koke Mill Road Springfield, Illinois 62711 USA www.brandt.co

800 300 6559

2014-10 (GHS)

Brandt

®

Pesticide Equipment Cleaner

Decontaminate Spray Rigs and Storage Tanks

参照

関連したドキュメント