CUSTOMER: CHEMORSE SIZE - 5.75” X 5.75”
SEMI-GLOSS / LAMINATION
COLORS - DIGITAL 4-C PROCESS UNWIND POSITION - # 4
644D-044 01/12 /09
DIE LINE - FPO DOES NOT PRINT
Carolina Eastern,Inc.
347 McAllister Mill Road Scranton, SC 29591
CE
NET CONTENTS: 2.5 GALLON
KINGPIN
Non-Ionic Wetter/Spreader/Penetrant
Principle Functioning Agents:
Proprietary blend of polyalkyleneoxide modified polydimethylsiloxane, nonionic emulsifiers and
methylated vegetable oil ...…….... 100%
All ingredients are exempt from the requirements of a tolerance as specified under 40 CFR 180.
KEEP OUT OF REACH OF CHILDREN
CAUTION
Not intended for human or animal consumption. See STATEMENT OF PRACTICAL TREATMENT for additional information. Read and understand the entire DIRECTIONS FOR USE and the NOTICE OF WARRANTY before using this product.
GENERAL INFORMATION
KINGPIN is a uniquely multifunctional spray adjuvant consisting of a highly refined and modified spray oil and nonionic organosilicone. KINGPIN h as b ee n formulated to promote fast spreading, uniform distribution and absorption of spray on leaf and stem surfaces, thereby reducing the negative effects of adverse environmental conditions.
KINGPIN is designed for use with those pesticides or products whose labels recommend the addition of a spray adjuvant to improve coverage. When used as directed, KINGPIN maximizes the activity and effectiveness of certain herbicides in post emergence applications. Therefore, care must be taken in treating sensitive crops during periods when plants are subjected to drought stress, high temperatures, and high humidity. Disclaimer: Always refer to the label of the pesticide before using KINGPIN or any other product.
DIRECTIONS FOR USE
May be applied by ground or aerial spray equipment. Use KINGPIN at the rate of 1-5 pints per 100 gallons of spray solution in ground applications. Use 3-6 pints per 100 gallons of spray solution in aerial applications. Some pesticide labels may recommend higher or lower rates of spray adjuvant. When this occurs follow the pesticide labels’
recommendations. Before using KINGPIN in a tank mix or prior to the application of a tank mix with a product where a nonionic spray adjuvant is not specifically recommended but not prohibited by the product’s label, the user or applicator advisor must have experience with the combination or must have conducted a phytotoxicity test under the same conditions.
MIXING
Prior to pesticide applications, clean mixing and application equipment according to the pesticide label directions. To prevent or minimize foaming, fill spray tank 2/3 or 3/4 full of water and begin agitation. Add an antifoam to the spray tank before pesticides, nutrients and or KINGPIN are added. For optimum results, spray mixes containing KINGPIN should be applied within 36 hours after mixing.
STORAGE AND DISPOSAL INFORMATION STORAGE: Store product in original container only, away from other pesticides, fertilizers, food or feed. Do not use, spill, or store near heat or open flame. Keep this container closed when not in use and take care to prevent any water from being introduced to the contents of this container.
DISPOSAL: Do not contaminate water, food or feed by storage or disposal. Triple rinse empty container and offer for recycling/reconditioning or dispose of in an approved sanitary landfill. Empty container may contain explosive vapors or hazardous residues. DO NOT REUSE EMPTY CONTAINER FOR ANY PURPOSE.
STATEMENT OF PRACTICAL TREATMENT Causes eye irritation. Avoid contact with eyes, skin, and clothing. May be harmful if swallowed. In case of eye contact, immediately flush with large quantities of water for at least 15 minutes. Call a physician. In case of skin contact, wash affected areas with soap and water. Remove and launder contaminated clothing before reuse. In case of ingestion, consume 1 or 2 glasses of water and induce vomiting. Do NOT induce vomiting or give anything by mouth to an unconscious person. Contact a physician immediately.
NOTICE OF WARRANTY: Seller warrants that this product conforms to the chemical description on the label thereof and is reasonably fit for purposes stated on such label only when used in accordance with the directions under normal use conditions. It is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which are beyond the control of the Seller. IN NO CASE SHALL SELLER BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER. SELLER MAKES NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE.
