GENERAL INFORMATION
Milled Ammonium Sulfate with Antifoam is a formulation containing refined spray grade ammonium sulfate that is milled and blended with a proportionate amount of dry antifoam.
Ammonium sulfate had been approved as a tank mix addi- tive to enhance the performance of many herbicides.
Research with various crops and these herbicides has shown that weed kill has been increased when ammonium sulfate is used as an additive to the tank mix. Antifoam is designed to correct foaming issues created by herbicides (i.e. glyphosate) in tank mix solutions.
DIRECTIONS FOR USE AND MIXING
Only a small amount of Milled Ammonium Sulfate with Antifoam is added to the herbicide solution: 8 to 20 pounds per 100 gallons of water (1 to 2% v/v). Agitate the tank water while slowly adding the Milled Ammonium Sulfate with Antifoam. Allow enough time for complete dissolution before adding additional adjuvants or herbicides.
FOLLOW USE RATE DIRECTIONS ON HERBICIDE LABEL.
THOROUGHLY RINSE EQUIPMENT AFTER USE.
CONDITIONS OF SALE OF WARRANTY
The directions for use of these products reflect the opinion of experts based on field use and test. The directions are believed to be reliable and should be followed carefully. However, it is impossible to eliminate all risks inherently associated with use of this prod- uct. Crop injury, ineffectiveness, or other unintended consequences may result because of such factors as weather conditions, pres- ence of other materials, or the manner of use or application, all of which are beyond the control of the Manufacturer or the Seller. All such risks shall be assumed by the buyer. The manufacturer warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the directions for use, subject to the inherent risks referred to above. THE MANUFACTURER OR SELLER MAKES NO OTHER EXPRESSED OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OF ANY OTHER EXPRESSED OR IMPLIED WARRANTY. IN NO CASE, SHALL SELLER BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INDI- RECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. The Manufacturer and the Seller offer this product and the Buyer and User accepts it subject to the foregoing conditions of sale and warranty which may be varied only by agreement in writing signed by duly authorized representative of the manufacturer.
CAUTION
Avoid contact with eyes and prolonged contact with skin.
Avoid breathing products dust. Wash thoroughly after han- dling.
If Swallowed: If conscious, drink 2 to 4 glasses of water and induce vomiting by touching finger to back of throat.
Get medical assistance.
If Inhaled: Move to fresh air. If breathing is difficult, give oxygen if available.
Attention: Empty container may contain product residue.
All label warnings apply to empty container.
CAUTION
KEEP OUT OF REACH OF CHILDREN NOT FOR FOOD OR DRUG USE NOT FOR HUMAN CONSUMPTION
UNITED SUPPLIERS, INC.
800-782-5123 • ELDORA, IOWA 50627
MILLED
AMMONIUM SULFATE
INGREDIENTS
Ammonium Sulfate . . . 99.1%
Dry Antifoam . . . 0.4%
Water . . . 0.5%
Total . . . 100.0%
The ingredients in Milled Ammonium Sulfate with Antifoam are exempt from the tolerances as specifies in federal regulation 40 CFR 180.1001 (c) for use in growing crops and raw agricultural commodities.
with Antifoam
EASY-TO-MIX FORMULATION THAT IMPROVES PERFORMANCE OF HERBICIDES
