SPECIMEN (2)INITIATE® ZN

Chemigation Equipment Calibration: In order to calibrate center pivot, lateral move, end tow, and traveler irrigation equipment (use only with electric or oil hydraulic drive

For control of woody plants, use Forestry Garlon XRT at the rate of 1.25 to 4 quarts per 100 gallons of spray mixture, or Forestry Garlon XRT at 2 to 4 quarts may be tank mixed

Chemigation Equipment Preparation: The following use directions must be followed when Cobalt Advanced is applied through sprinkler irrigation systems. Thoroughly clean

Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip.. Hold

The maximum noncropland application rate for tree, brush and woody plant control is 2.2 gallons of product per acre per application per site.. Limited to one application

The label directions given here are based on data obtained with no additives; use of any product with Tekken Broad Spectrum Fungicide may affect the result..

This limited warranty does not extend to the use of the product inconsistent with label instructions, warnings or cautions, or to use of the product under abnor mal

TO REDUCE THE TRANSPLANT SHOCK TO GROUNDCOVERS, VINES, BEDDING PLANTS, AND FLOWERS: Mix one (1) gallon of T rans F ilm with 20 to 40 gallons of water (Table 3).. Choose the