• 検索結果がありません。

overed Models Regarding the features, operation and after servicing, please refer to the service manual(tr0-).

N/A
N/A
Protected

Academic year: 2022

シェア "overed Models Regarding the features, operation and after servicing, please refer to the service manual(tr0-)."

Copied!
62
0
0

読み込み中.... (全文を見る)

全文

(1)

TR07-04A

(2007.12.00000)NK TR07-04A

LXE10E-A36 LXE10E-A36A

Marine type Container Refrigeration Unit

Optional Functions・

Service Manual・Parts List

Head Office. Umeda Center Bldg., 4-12, Nakazaki-Nishi 2-chome, Kita-ku, Osaka, 530-8323 Japan.

Tel: 06-6373-4338 Fax: 06-6373-7297

Tokyo Office. JR Shinagawa East Bldg., 10F 18-1, Konan 2-chome, Minato-ku Tokyo, 108-0075 Japan.

Tel: 03-6716-0420

Fax: 03-6716-0230

PL̲LXE10E-A36-表紙.qx  07.12.6 9:12 AM  ページ 1

(2)

− 1 −

Covered Models

Regarding the features, operation and after servicing, please refer to the service manual(TR02-14).

P01-08̲PL-LXE10E-A36  07.12.6 9:22 AM  ページ 1

(3)

− 2 −

P01-08̲PL-LXE10E-A36  07.12.6 9:22 AM  ページ 2

(4)

− 3 −

CONTENTS

1. Names of components ………4

2. Transducer ………5

3. Initial setting table into spare controller ………6

4. Refrigerant piping diagram ………7

5. Schematic wiring diagram ………8

6. Stereoscopic wiring diagram ………9

目  次 1. ………11

2. ………12

3. ………13

4. ………14

5. ………15

6. ………16

P01-08̲PL-LXE10E-A36  07.12.6 9:22 AM  ページ 3

(5)

− 4 −

1. Names of components

1

q

Sampling port (Return)

P01-08̲PL-LXE10E-A36  07.12.6 9:22 AM  ページ 4

(6)

− 5 −

CAUTION

Do not expose the low pressure transducer to hot air of a dryer for excess time.

Otherwise, the transducer may be damaged.

2.1 Low pressure transducer (LPT)

The LPT is located in the refrigerant circuit.

The operating low pressure value is displayed on the controller indication panel.

(1) Replacing the transducer

q Disconnect the lead wire from the control box.

w In order to prevent refrigerant from flowing out, disconnect the low-pressure transducer piping from the gauge joint (with check valve) C on the compressor side.

e Remove two screws on the clamp plate fixing low pressure transducer in place, and cut the binding bands.

y Apply the heat shrinkage tube in the following position, then shrink it with hot air of a dryer.

t Insert the pressure transducer cable through the heat shrinkage tube, and connect the union joint and connector to the new low pressure transducer. If paint on the low pressure transducer is peeled off, apply clear lacquer.

r Remove the heat shrinkage tube, and disconnect the connector from the low pressure transducer.

u Apply sealer between the heat shrinkage tube and the flare nut. (Sealer :KE4898)

i Fix the low pressure transducer with the clamp plate, and fix the cable with the binding band.

Fix the shrinkage tube end of the cable side downward for prevention of water entering into the tube.

2.2 High pressure transducer (HPT)

The HPT is located in the refrigerant circuit.

The operating high pressure value is displayed on the controller indication panel.

(1) Replacement procedure

The replacement procedure is the same as that for the low pressure transducer.

Make sure that the fixing position and the cable connection is correct.

q Clamp plate w Binding band w Binding band

Flare nut Union joint Low pressure transducer

Flare nut Union joint Low pressure transducer

Heat shrinkage tube

r Dryer Make the heat shrinkage tube fit in this area

Gauge pipe side Low pressure

transducer cable side q Heat shrinkage tube

w Connector

e Flare nut

q

Clamp plate

Fix the tube directing the end downward

w

Binding band Sealer

2. Transducer

Transducer type NSK-BC010F

Identification color

Transducer Black body

Connector Nothing

Transducer type NSK-BC030F

Identification color

Transducer Red & Brown body

Connector Nothing

P01-08̲PL-LXE10E-A36  07.12.6 9:22 AM  ページ 5

(7)

− 6 −

Notes 1. Comfirm MODEL NAME mentioned in the name plate mounted on the reefer unit. 2. It is possible to input Container I.D. and Controller Time with both the panel operation and the personal computer installed DCCS's software. 3. When inputting the container I.D. by the panel operation, take care not to enter any of the following pairs of alphabet and numeral(i-1),(O-0),(S-5). 4. If you don't input container I.D., it is impossible to download the logger data with the personal computer. 5. If you don't input the controller set time, it starts from 2001.1.1, 0:00.

3 ..  Initial setting tab le into spare contr oller MODEL NAME Note 1

※ 7. Optional function setting mode ※ 8. Basic function mode ※ 9.Optional Condition setting mode ※ 10. Input Data LXE10E USdA dHu DECOS-3 LOG INT REC SEN OC-SET HP dISP COMP REHEAT CHARTLS USdA1/2 H001 H002 H003 H004 H005 H006 D1-- D2-- D3-- D-1- D-2- C/F SET Id SET TIME USdA sensor

Dehumi- dification control Controller setting Logging interval Data recorder sensor

Input power Hose power Panel lighting OFF Comp./ Unload setting Reheat coil setting D/H code alarm indication

USdA sensor type H code D code Temp. indication Container I.D. Controller set time -A36 -A36A OFF 3 C ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ Spare controller blank blank blank blank blank blank blank blank blank blank ON 1 3 2 2 2 3 3 1 1 1 1 1 C blank 01/1/1

OFF D 60 ON Single 10 OFF 100 ON ON 2 2 2 2 3 3 1 1 1 1 1 * GMT

FA SEN OFF blank

P01-08̲PL-LXE10E-A36  07.12.6 9:22 AM  ページ 6

(8)

− 7 −

4. Refrigerant piping diagram

P01-08̲PL-LXE10E-A36  07.12.6 9:22 AM  ページ 7

(9)

− 8 −

P01-08̲PL-LXE10E-A36  07.12.6 9:22 AM  ページ 8

(10)

5. Schematic wiring diagram

− 9 −

P09-10̲PL-LXE10E-A36(A3).qx  07.3.19 1:43 PM  ページ 9

(11)

6. Stereoscopic wiring diagram

− 10 −

(4) The sequence diagram in this diagram is as shown in the table.

(5) When tightening two round terminals together, proceed as follows.

  When tightening two terminals together, which are different in wiring size,

   the terminal with larger wiring size must be located on the downside as shown below.

(6) Round crimpーstyle terminal (FN type) with M3.5 insulating sleeve   Place tightening two terminals together or with M3.5 insulating sleeve   Round crimpーstyle terminal (FN type) and with M4 insulating sleeve   In the place tightening two terminals together, they must be tightened with torque   of 11.2 −13.8 kg-cm(1.1−1.3.N-m)

(7)o not contact the wiring with the coil of TrC.

(8)he space between strong and light electric wirings must be 25 mm or more.

(9)nless otherwise instructed, ,efer to GAH010-Zーfor the internal wiring.

(10)he color in parentheses is for identification.

M3.5 screw

The terminal with larger wiring size must be located on the downside. 

M3.5 round crimpーstyle terminal (FN type)

(Back to back) 

C T 2 C T 1 FAS TB1.CN40ー1

TB1CN323

3 C N 2 1

1

C N 2 2 C N 2 5 C N 2 0

C N 2 6

T r c

A 

CN393TB1. 

Trc

1 3 9 1 0 8

1 3 1

1 4 0 1 2 3

1 3 2 1 2 5 1 0 3 RCDー5

A 

TB1CN55

R S V A M B S 2

1 3 4

T B 1.C N 3 7ー2

E F M 1

REVISION 改 正 前   BEFORE

A 

C A PPR2 B

3 2 3 1 A 1 W

R T

A 2 V

S U

B A T EC7 CM

BRN

D C H S (B L K)  

V W 1 4 3 2 A 2 1 3 A 1 U

R S T 3 1

H P T

TB1CN382 TB1CN56

TB1CN311

TB1CN383 CTR

P C C 2

A 

5A

3 1

6A

7 5

4A

REVISION 改 正 前   BEFORE

SMV

11A

C T P C N 6

C N 2 C N 3

1 1 A

5A 11

32C B

U 2

C B

1

C

1

RCDー7

140

2

41

RPP

43

4

143

2

YLW EMERGENCYCOOL) 

32

PT

RED

202 43

3 2 A

E C 3

6A TB1CN52

A 

※ 

P C C 1

10C

155

3

3

C N 2 1

2

44

3

6

3 4 5

40

138 43

4

※  1

23C

E C 2

U 1

ボ − ド  

BRN 35 WHT

5

145

C N 7

W H T

301

(Y L W)  

C Nー2

135 BLK

E C 6

TB1CN381

C N 8 3

31

W 2 3

171

2

H S V

134

2 1

R S

C N 1 8

24V

B 42

C N 8

8

34

BLK

WHT

(G R N,R E D)  

C N 8 1

136

4

0V

B L K

GRY

1

23

TB1CN384

2

24C

6

C N 2

BLK

1

A

RED

C N 2 3

BRN

12 11

T B 1

132

34

C N 2 7

YLW

E F M 2

P T

4

3

C T 2

7

B

11C

RCD ( YORK ) 

C Nー3 1

C

TB1CN315

3

C

E C 4 2

B WHT

CN10

EMERGENCYHEAT) 

TB1CN53

C N 1 9

A 

(B L U,R E D)  

C Nー1 3

151

151

(B L K)  

E

BLK

11

W RSDー3

C M

31C 33 0V

(G R N)  

11C

T

※ 

133

TB1CN321

32C

2

0V

6

B

U 1

E I S

154

C Nー5

1

302

154 TB1CN51

TB1.CN37ー1 R

39

B S V

C N 1 7 5

Z1C 7

BLK

E V

T e S 1

※ 

4A

2

42

B

B L K

※ 

152

5 101

、 

C NーC 1

A

C N 3 8

S G S

C N 9

4 5

4

31 22

144 10

C N 1 3

104

A

3 C N 3 2

U W S

R A 1

V T 3 1

3 2 A 2

C N 1 0

44

E S V

PT−CT 

RED

2

C Nー1 2

RED

4

P

5

13V

C T

137 A

4 1

C Nー1

D S S

C

C Nー1 4

10

※ 

C N 1 8

1

41

2

BRN

C Nー3 2

1

155

C N 2 2

E C 1 5

3

33

C

3

TB1CN313

3

L S V

C N 3 3

WHT

C 201

1

TB1CN325

10

C N 1 5

2

1

C N 3 1

C N 1 4

R E D C N 3 7

44

4 2

BLU

R E D

3

C F C

BRN

T r c

U

3 1 V S

R T

3 2 A 2 A 1 W

24V

I S V

(B L U)  

8

W H T C NーC 2

C C

1

USDA1

UR1

BRN

C

C T 1

1 1

C F M

0V

CN394TB1. 

11C

12C 139 UR2

USDA2

C N 2 4

3

S S 6

146

6

U 3

3

C N 3 9

11

31 31A

C Nー1 1

1 2

E O S

B

C N 2 3

A

152 UR3

USDA3

C N 6 A

※ 

32A YLW

2 B

153 RED 171

A

C Nー4

C

3

32 12

2

C N 1 2

(B R N)  

W H T

D R S

C N 3 6 1

R E D

A PPR1

B C

C N 1 6

24

CT

10A

C

C N 1 4

C N 1 7

5 TB1.  CN391

C N 8 2

TB1.CN40ー2

3

BLK C BLK

E C 5

位 置  

H u S (B R N)  

BLU

7

31C 32C

C

P C C 1 C N 1 1

7

C N 1 9

C C

W 1

12A

B

WHT

C N 2 4

2

TB1.  CN392

D S V

42

C N 4 0

C

4

6

S

1

40

(W H T)  

B

C

5

W 3

1

WHT

2

C

C Nー2 9

400V

C N 3 4 U 2

6

3

32

C Nー3 0

C N 1 6

B L K REVISION

改 正 前   BEFORE

RED

1

A

22C

3 1 A T

S

V A 2

2 3 A 1 U 1 4 2 4

1 3 W R

BLU

2

C T S

153 YLW RED

C N 2 0

4

E F H

C

E F L

5

A

39 40

E C 7

TB1CN54

41 131

H P S

( 4 0 0 V )  

C WHT 35

C Nー3

L P T

C N 8 4

3

1

EC5

T V W 1 4 3 2 R S 3 1 A 1 U A 2

1 3

31C

※ 

H W

U V

10

※ 

39

C

N F

169

※ 

4A

EC1.CN16

5A

※ 

6A

105 166

WHT 164

106

164

※ 

165

168

167

167

170 168

6

5 BLU

6

C B

P09-10̲PL-LXE10E-A36(A3).qx  07.3.19 1:43 PM  ページ 10

(12)

− 11 − 1

q

P11-14̲PL̲LXE10E-A36.Qx  07.12.6 9:32 AM  ページ 11

(13)

− 12 −

P11-14̲PL̲LXE10E-A36.Qx  07.12.6 9:32 AM  ページ 12

(14)

− 13 −

LXE10E

USdA dHu DECOS-3 LOG INT REC SEN OC-SET HP dISP COMP REHEA T CHAR TLS USdA1/2 H001 H002 H003 H004 H005 H006 D1-- D2-- D3-- D-1- D-2- C/F SET Id SET TIME ON 1 3 2 2 2 3 3 1 1 1 1 1 C 01/1/1

− A36 − A36A

O

FA SEN

OFF 3 C OFF D 60 O N 10 OFF OFF 100 ON ON 2 2 2 2 3 3 1 1 1 1 1 GMT *

3

P11-14̲PL̲LXE10E-A36.Qx  07.12.6 9:32 AM  ページ 13

(15)

− 14 −

4.

P11-14̲PL̲LXE10E-A36.Qx  07.12.6 9:32 AM  ページ 14

(16)

5.

− 15 −

P15-16̲PL̲LXE10E-A36(A3).qx  07.3.19 3:15 PM  ページ 15

(17)

6.

− 16 −

C T 2 C T 1

FAS TB1.CN40ー1

TB1CN323

3 C N 2 1

1

C N 2 2 C N 2 5 C N 2 0

C N 2 6

T r c

A 

CN393TB1. 

Trc

1 3 9 1 0 8

1 3 1

1 4 0 1 2 3

1 3 2 1 2 5 1 0 3 RCDー5

A 

TB1CN55

R S V A M B S 2

1 3 4

T B 1.C N 3 7ー2

E F M 1

REVISION 改 正 前   BEFORE

A 

C A PPR2 B

3 2 3 1 A 1 W

R T

V A 2 S U

B A T EC7 CM

BRN

D C H S (B L K)  

V W 1 4 3 2 A 2 1 3 A 1 U

R S T 3 1

H P T

TB1CN382 TB1CN56

TB1CN311

TB1CN383 CTR

P C C 2

A 

5A

3 1

6A

7 5

4A

REVISION 改 正 前   BEFORE

SMV

11A

C T P C N 6

C N 2 C N 3

1 1 A

5A 11

32C B

U 2

C B

1

C

1

RCDー7

140

2

41

RPP

43

4

143

2

YLW EMERGENCYCOOL) 

32

PT

RED

202 43

3 2 A

E C 3

6A TB1CN52

A 

※ 

P C C 1

10C

155

3

3

C N 2 1

2

44

3

6

3 4 5

40

138 43

4

※  1

23C

E C 2

U 1

ボ − ド  

BRN 35 WHT

5

145

C N 7

W H T

301

(Y L W)  

C Nー2

135 BLK

E C 6

TB1CN381

C N 8 3

31

W 2 3

171

2

H S V

134

2 1

R S

C N 1 8

24V

B 42

C N 8

8

34

BLK

WHT

(G R N,R E D)  

C N 8 1

136

4

0V

B L K

GRY

1

23

TB1CN384

2

24C

6

C N 2

BLK

1

A

RED

C N 2 3

BRN

12 11

T B 1

132

34

C N 2 7

YLW

E F M 2

P T

4

3

C T 2

7

B

11C

RCD ( YORK ) 

C Nー3 1

C

TB1CN315

3

C

E C 4 2

B WHT

CN10

EMERGENCYHEAT) 

TB1CN53

C N 1 9

A 

(B L U,R E D)  

C N1 3

151

151

(B L K)  

E

BLK

11

W RSDー3

C M

31C 33 0V

(G R N)  

11C

T

※ 

133

TB1CN321

32C

2

0V

6

B

U 1

E I S

154

C N5

1

302

154 TB1CN51

TB1.CN37ー1 R

39

B S V

C N 1 7 5

Z1C 7

BLK

E V

T e S 1

※ 

4A

2

42

B

B L K

※ 

152

5 101

、 

C NーC 1

A

C N 3 8

S G S

C N 9

4 5

4

31 22

144 10

C N 1 3

104

A

3 C N 3 2

U W

R S A 1

V T 3 1

3 2 A 2

C N 1 0

44

E S V

PT−CT 

RED

2

C N1 2

RED

4

P

5

13V

C T

137 A

4 1

C Nー1

D S S

C

C N1 4

10

※ 

C N 1 8

1

41

2

BRN

C Nー3 2

1

155

C N 2 2

E C 1 5

3

33

C

3

TB1CN313

3

L S V

C N 3 3

WHT

C 201

1

TB1CN325

10

C N 1 5

2

1

C N 3 1

C N 1 4

R E D C N 3 7

44

4 2

BLU

R E D

3

C F C

BRN

T r c

U

3 1 V R S T

3 2 A 2 A 1 W

24V

I S V

(B L U)   8

W H T C NーC 2

C C

1

USDA1

UR1

BRN

C

C T 1

1 1

C F M

0V

CN394TB1. 

11C

12C 139 UR2

USDA2

C N 2 4

3

S S 6

146

6

U 3

3

C N 3 9

11

31 31A

C N1 1

1 2

E O S

B

C N 2 3

A

152 UR3

USDA3

C N 6 A

※ 

32A YLW

2 B

153 RED 171

A

C N4

C

3

32 12

2

C N 1 2

(B R N)  

W H T

D R S

C N 3 6 1

R E D

A PPR1

B C

C N 1 6

24

CT

10A

C

C N 1 4

C N 1 7

5 TB1.  CN391

C N 8 2

TB1.CN40ー2

3

BLK C BLK

E C 5

位 置  

H u S (B R N)  

BLU

7

31C 32C

C

P C C 1 C N 1 1

7

C N 1 9

C C

W 1

12A

B

WHT

C N 2 4

2

TB1.  CN392

D S V

42

C N 4 0

C

4

6

S

1

40

(W H T)  

B

C

5

W 3

1

WHT

2

C

C Nー2 9

400V

C N 3 4 U 2

6

3

32

C Nー3 0

C N 1 6

B L K REVISION

改 正 前   BEFORE

RED

1

A

22C

3 1 A S T

V A 2

2 3 A 1 2 4

U 1 4

1 3 W R

BLU

2

C T S

153 YLW RED

C N 2 0

4

E F H

C

E F L

5

A

39 40

E C 7

TB1CN54

41 131

H P S

( 4 0 0 V )  

C WHT 35

C Nー3

L P T

C N 8 4

3

1

EC5

T V W 1 4 3 2

A 1

R S 3 1

A 2 U

1 3

31C

※ 

H W

U V

10

※ 

39

C

N F

169

※ 

4A

EC1.CN16

5A

※ 

6A

105 166

WHT 164

106

164

※ 

165

168

167

167

170 168

6

5 BLU

6

C B

P15-16̲PL̲LXE10E-A36(A3).qx  07.3.19 3:15 PM  ページ 16

(18)

− 17 −

(TR07-04A)

ORDERING INSTRUCTIONS

The parts list contains the parts of the DAIKIN Marine Type Container Refrigeration Units.

Please read the following items before using the list.

1. When ordering the parts, be sure to specify the model No., the name of part and the type of part. When ordering the parts for which no parts NO. is shown in the PARTS NO.

column, be sure to describe DWG.NO..

2. The list shows the parts only for replacement or repairing at the job site. Certain parts require a production lead time or are supplied as a set, so please contact with the nearest DAIKIN PARTS CENTRE.

3. Index symbols;

Meaning of the ranking A,B and C are as follows;

A. The most important spare parts

1. The parts whose malfunction cause fatal damage to the unit.

2. The parts with high risk of malfunction.

3. The parts that are worn out after an extended service period.

B. The important spare parts next to A, but the risk of malfunction is not so high.

C. The parts with low risk of malfunction, but recommendable to stock to cope with damage during handling of container box and long delivery time, etc.

The parts without A, B and C mark is the parts whose necessity is not so high under normal operation.

パーツリスト使用上の注意

このパーツリストはダイキン海上コンテナ冷凍装置の部品を集録してあります。パーツリ スト使用にあたっては、必ず次の注意事項をご一読の上使用していただくようお願いいた します。

1.部品のご注文の際は機種名、 部品番号、 および部品名、 形式を必ずご指定ください。

なお、 部品番号欄が空白になっている部品は、 図面番号で指示願います。

2.掲載部品の範囲は、 あくまでも現地にて分解修理できるところまで記載しております。

一部部品につき納期のかかるものおよびセット単位となるものもありますので、 お近 くのダイキンパーツセンター又はサービスステーションに相談願います。

3.INDEXの説明

INDEXのA、B、Cの意味は下記の通りです。

A. 最も重要な部品

1. 故障した場合に最も重大な損害を与えると思われる部品 2. 故障の確率が高いと思われる部品

3. 長期の使用で摩耗して使用できなくなる部品 B. 故障発生の確率は高くはないが、Aについで重要な部品

C. 故障発生の確率は低いが、コンテナボックスの運搬中の事故や、部品の納期が長期 になると思われる等の理由で、在庫をお勧めする部品

A,B,Cマークの無い部品は、通常の運転では必要性は高くない部品です。

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 17

(19)

− 18 −

(TR07-04A)

Denomination of Model Name

L X E E

NOMINAL HORSE POWER 5 : 5

10 : 10

CONDENSER COOLING TYPE

NIL : AIR and WATER COOLED TYPE A : AIR COOLED TYPE

OPTION NUMBER

機種名について

L X E E

称呼馬力 5 : 5 10 : 10

凝縮器冷却方式 なし:空水冷兼用形   A  :空冷専用形

オプション番号

Note) "R" GIVEN AFTER OPTION NUMBER STANDS FOR "REVISION"

AND IT IS GIVEN FOR THE UNIT WHICH IS SPECIALLY MODIFIED.

注)オプション番号の後に R がつく機種は、改造機で、特別な仕様が 加えられていることを意味します。

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 18

(20)

− 19 −

(TR07-04A)

C O N T E N T S

Page A. Parts related with the unit(outside)………20

庫外関連部品

B. Parts related with refrigerant piping(outside) ………22 庫外冷媒配管関連部品

C. Parts related with the unit(inside) ………26 庫内関連部品

D. Parts related with refrigerant piping(inside) ………28 庫内冷媒配管関連部品

E. Other parts(Pipe clamp, sealing and insulation material etc.) ………30 その他部品(配管固定具、シール材、防熱材等)

F. Control box ………38

コントローラボックス

G. Parts related with name plate ………42 銘板関連

I. Parts related with option 1 – USDA………44 オプション関連部品1 - USDA関連

J. Parts related with option 2 – MODEM ………46 オプション関連部品2 - モデム

K. Parts related with option 3 – Others ………48 オプション関連部品3 - その他

1. Indoor fan guard 庫内ファンガード 2. Evaporator coil 蒸発器コイル組立品

L. List of size for standard pipe clamp ………50 配管固定具サイズ表

1. Resin clamp 樹脂バンド 2. Tube clamp 管止金

3. Cushion rubber for pipe clamp 管止金用緩衝ゴム

M. Note for ordering spare parts ………52 部品発注の際の注意事項

1. Parts recommended to be ordered together with packing, gasket, sealing material and name plate 発注の際にパッキングやシール材、銘板等の同時発注を推奨する部品

2. Order for motorized valve, solenoid valve and pressure regulating valve 電動弁・電磁弁・圧力調整弁の発注

3. Order for pressure transducer 圧力センサーの発注 4. Order for temperature sensor 温度センサーの発注

N. Measuring and adjusting tools ………57

測定調整用工具

1. Tools for emergency operation 緊急運転用工具

2. Personal computer cable (for DCCS) パソコンケーブル(DCCS用)

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 19

(21)

− 20 −

(TR07-04A)

Parts related with the unit(outside) 庫外関連部品

A20

A19 A30

A18

A7

A13

A36

A17

A9 A8

E13

A1

A35 A31

A32 A33 A34

A14 A16

A2

A3

A15

(Refer to 53Page)

E55 A11

A10

A12

A5 A6

A4

(Refer to 52Page)

A19

A21

A21 A22 A20

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 20

(22)

− 21 −

(TR07-04A)

Parts related with the unit(outside) 庫外関連部品

NO.

符号 INDEXPARTS NO.

部品番号 PARTS NAME 部品名称 DWG. NO.

図面番号

TYPE SPECIFICATION 形式 仕様

QTY/UNIT REMARKS

備考

A1 1448270 Power plug 電源プラグ 3P109727-1

A2 A 0954936 Condenser fan motor 凝縮器電動機 3P005566-1

A3 B 0980618 Fan Brade(outside) プロペラファン(庫外側) 2P004956-1 P44H11S

A4 C 1612576 Access panel(FRP) サービス扉組立品 1P006678-5 Refer to Page52

A5 1266207 Cushion material(access panel) クッション材(サービス扉) 3P033608-1 Refer to Page52

A6 1196113 Sealing material(access panel) シール材(サービス扉) 3P001640-2 Refer to Page52

A7 1326705 Wire clamp 電線止め金 4P090422-1

A8 C 1266199 Drain hose ドレンホース 3P011299-1 For trap type

A9 537320 Hose band ホースバンド R4716528-3

A10 1266137 Fan guide stay ass'y(outside) ファンガイドステー組立品(庫外側)3P027891-1

A11 1588356 Fan guide(outside) ファンガイド(庫外側) 1P050906-6

A12 C 1588349 Discharge grill 吹出グリル 1PA53427-6

A13 1765393 Mounting plate 2, cable storage ケーブル収納部取付板2 4P191608-1 A14 1564660 Cabel holding sheet metal ケーブル収納部板金(圧縮機前板:有/無共用)3P128458-1

A15 1739286 Front plate(CA) 前板(CA) 2P173133-1 Refer to Page53

A16 1600504 C,BOX Front plate コントロールボックス前板(左)2P093861-5

A17 1485527 Fixing plate 外板取付板(1) 3P116814-1

A18 1661321 Fixing plate 外板取付板(2) 3P170535-1

A19 B 0981060 Ventilation cover 換気口蓋 3P003175-1 Refer to Page53

A30 1496820 Protection cover(2) 温度計挿入口保護カバー(2) 4P085921-2

E55 1267077 Packing for prevention of vibration CA前板ビビリ防止パッキン 4P050050-1

A20 1266221 Sealing material(ventilator) シール材(換気口) 4P016185-1 Refer to Page53

A21 1775446 Wing bolt 蝶ボルト 4P048681-2

A31 1266238 Hexagon head bolt PC六角ボルト R4290921-125 M12X25

A32 1386930 Latch(victor chain) 掛金(ビクターチェーン) 4P063801-1

A33 1775453 Tapping screw タッピンネジ 4SK05064-10

A34 844012S Plain washer 平座金 4SK07005-3 M3SUS

A35 1267084 Gasket, resin bolt パッキン樹脂ボルト用 4PA63573-1

A36 1679416 Front panel(right) 前板(右) 3P173348-1

E13 1266788 Resin clamp 樹脂バンド NE41015-12 MILK WHITE

1 1 1 2 2 2 1

1 1 1

1 1 1 1 1 1 1 1 1 2 4

1

1 1 1 1 1 1

6 2

A22 0275145 Plain washer(Woods round type) 平座金(木材用丸) 4SK07006-6 M6 4

LXE10E- A36 A36A

1 1 1 2 2 2

1 1

1 1 1 1 1 1 1 1 1 2 4 4

1 1 1 1 1

6 2

A7 1779734 Wire clamp 電線止め金 4P090422-2

1

A10 1813689 Fan guide stay(center) ファンガイドステー(中央) 3P007593-1 1

A30 1386923 Protection cover 温度計挿入口保護カバー 4P085921-2 1

A36 1787456 Front panel(right) RESIN 前板(右)〈樹脂〉 2P175878-1 1

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 21

(23)

− 22 −

(TR07-04A)

Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品

B21 B12

A

A

B12

View A-A

B11詳細(Detail of B11) B23

B26 B11

Discharge pipe Feeler bulb inserting pipe

Feeler bulb

B13詳細(Detail of B13)

B13 B23

Suction pipe Feeler bulb inserting pipe Feeler

bulb

LSV B2

B8-1-1 B8-1-2 B8-1-3

B8-1-5

B8-1-4

B3-2-2 B3-2

B3-2-1

B3-2-3

B19 E22 E22

B16 B17

B3-5

B24

B14

B1 B25

B9-2 B9

B13 B6

B8

B5

B4-4 B4

B9-1-2 B9-1-1 B9-1

B9-1-3

B3-2-2

B3-2-1 B3-2

B3-2-3 B4-3

B4-1 B4-6 B4-5

B5-2 B5-1

B10

B4-2 B3-1

B6-1 DSV

RSV

HSV

ESV ISV BSV

EV

B7a

B7b

B7-1 B7-6

B7-4 B7-7

B7-5

B7-2 B7-8

B7-3 B20

B12詳細(Detail of B12)

B12

B15 B18

SMV

DPR B3 B3-3

B8-1

B3-4

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 22

(24)

− 23 −

(TR07-04A)

Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品

When ordering the parts whose No. are not shown in the PARTS NO. column, be sure to describe DWG. NO..

部品番号欄が空白になっている部品は、図面番号で、指示願います。

NO.

符号 INDEXPARTS NO.

部品番号 PARTS NAME 部品名称 DWG. NO.

図面番号

TYPE SPECIFICATION 形式 仕様

QTY/UNIT REMARKS

備考

B1 A 1199415 Compressor 圧縮機 JT224D-NYR

B2 C 1387173 Air cooled condenser 空冷凝縮器 2P089486-1 CA-LXE10E1

B3 Discharge pipe ass'y 吐出配管組立品 2P185924-1

B3-1 C 1199167 Strainer ストレーナ 4P051389-1

B3-2 C 1178920 Service valve ass'y サービスバルブ組立品 3P048905-1

B3-2-1 B 117592J Service valve cap キャップ 3P048905-1-KU

B3-2-2 B Service valve body 本体 3P048905-1-KA

B3-2-3 B 1178850 Valve core バルブコア 3P048905-1-KI

B3-3 B 0684220 Check valve 逆止弁 3SA27008-1

B3-4 A 1241361 Discharge pressure regulating valve 吐出圧力調整弁 3P074558-1 Refer to Page54

B3-5 1266276 Flange(convex) 吐出管フランジ(凸) 4P065933-1

B3-6 B 292011 Gauge joint(with check valve) 逆止弁付ゲージ接手 2PF00177-1 VCG2DA

B4 Liquide receiver ass'y 受液器配管組立品 2P185996-2

B4-1 1266283 Liquid receiver 受液器レシーバ 4P081428-1 φ90×t1.8

B4-2 013785J Flare nut フレアナット 4SK23011-4 FNS4 φ12.7

B4-3 A 1498035 Fusible plug 可熔栓 3SA27103-1

B4-4 0299134 Filter フィルタ 3SA26004-2

B4-5 B 1787247 Solenoid valve body 電磁弁本体 3P198486-1 VPV-803DQ52 Refer to Page54

B4-6 A 0955287 Solenoid valve coil 電磁弁コイル 3P010453-1 Refer to Page54

B6 ESV pipe ass'y ESV配管組立品 3P186013-1

B7b Refrigerant pipe ass'y ISV・ESV配管組立品 3P178353-3

B7-6 A 0088738 Nev type solenoid valve body NEV型電磁弁本体 R3305099-1-KI NEV-202DXF Refer to Page54

B8-1-2 1496914 Clamp, suction modulating valve 吸入比例弁クランプ 2P078385-1-KI

B5 Liquid pipe ass'y 液配管組立品 3P162887-1

B5-1 013785J Flare nut フレアナット 4SK23011-4 FNS4 φ12.7

B6-1 C 0085296 Strainer ストレーナ(100メッシュ) R4697892

B7a Refrigerant pipe ass'y 冷媒配管組立品(リース) 2P194270-1

B7-1 C 1505748 Filter フィルタ 3P011071-1

B7-2 C 1490846 Strainer ストレーナ 4P051958-1

B7-3 A 125649J Electronic expansion valve body ass'y 電子膨張弁本体組立品 2SA50010-2-KU Refer to Page54

B7-4 B 1787247 Solenoid valve body 電磁弁本体 3P198486-1 VPV-803DQ52 Refer to Page54

B7-5 A 1266290 Solenoid valve coil 電磁弁コイル 3P010453-2 Refer to Page54

B8-1-3 1270390 Coil, suction modulating valve 吸入比例弁コイル 2P078385-1-KU

1 1

1 1 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 4 4 1 2

1 1

B5-2 A 0622107 Liquid moisture indicator モイスチャーインジケーター 3PA51270-3 SGN12S 1

B7-8 C 0964166 Strainer ストレーナ 4P012568-1 1

B8 1496781 Suction pipe ass'y(inside) 吸入配管組立品(庫内) 3P071569-2 1

B8-1 A 1254538 Suction modulating valve ass'y 吸入比例弁組立品 2P078385-1 1 Refer to Page54

B8-1-1 1270376 Upper cover, suction modulating valve 吸入比例弁カバー上 2P078385-1-KA 1

B7-7 A 1266290 Solenoid valve coil 電磁弁コイル 3P010453-2 2 Refer to Page54

1

1 1 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 1 2 2 1 1 1 1 1 1 LXE10E- A36 A36A

B2 C 1813696 Air cooled condenser 空冷凝縮器 2P195935-1 CA-LXE10E3 1

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 23

(25)

− 24 −

(TR07-04A)

Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品

When ordering the parts whose No. are not shown in the PARTS NO. column, be sure to describe DWG. NO..

部品番号欄が空白になっている部品は、図面番号で、指示願います。

NO.

符号 INDEXPARTS NO.

部品番号 PARTS NAME 部品名称 DWG. NO.

図面番号

TYPE SPECIFICATION 形式 仕様

QTY/UNIT REMARKS

備考

B8-1-5 1270415 Cover band, suction modulating valve 吸入比例弁カバーバンド 2P078385-1-KO

B9 Suction pipe ass'y(outside) 吸入配管組立品(庫外) 3P162880-1

B9-1 C 1178937 Service valve ass'y サービスバルブ組立品 3P048907-1

B9-1-1 B 1178867 Valve core バルブコア 3P048907-1-KI

B9-1-2 B 1637498 Service valve body 本体 3P048907-1-KA

B9-1-3 B 117591J Service valve cap キャップ 3P048907-1-KU

B9-2 1266315 Square flange 角フランジ 4PA61542-1

B10 A 1241385 Drier ass'y ドライヤ組立品 3P069859-1

B11 A 098332J Sensor, discharge pipe temperature(DCHS) 吐出管用センサ(DCHS) 3SA48009-10 Refer to Page56 B12 A 0798321 Sensor, ambient air temperature(AMBS) 外気温度センサ(AMBS) 3PA61769-6 ST9503-6(NIL) Refer to Page56 B13 A 098333J Sensor, comp suction pipe temperature(SGS) 圧縮機吸込配管温度用センサ(SGS)3PA61769-9 ST9503-9(white) Refer to Page56

B14 1266322 Cable(comressor) ケーブル(圧縮機) 3P063458-1

B15 A 1587942 Low pressure transducer(LPT) 低圧圧力センサ(LPT) 3P141601-1 NSK-BD010F-70 Refer to Page55 B16 A 1587959 High pressure transducer(HPT) 高圧圧力センサ(HPT) 3P141602-1 NSK-BD030F-70 Refer to Page55

B19 A 1241378 High pressure switch 高圧圧力開閉器 3P071506-1

B20 A 138143J Electronic expansion valve coil 電子膨張弁コイル 2P010454-2 Refer to Page54

B21 1605244 Therminal fixing plate, Resin サーミスタ固定具(樹脂) 3P124175-1

B23 0423968 Mounting spring,thermistor サーミスタ取付バネ 4PA38890-1

B24 A 0132192 Flange packing, compressor discharge 圧縮機吐出側フランジパッキン 4SK20053-4 B25 A 0395032 Flange packing, compressor suction 圧縮機吸入側フランジパッキン R4221042-1

B26 1267147 Thermal insulation tube 断熱筒(吸入弁庫外側) 4P073602-1

2 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 3 3 1 1 1

LXE10E- A36 A36A

2 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 3 3 1 1 1

B8-1-4 1270408 Body, suction modulating valve 吸入比例弁弁本体 2P078385-1-KE 1 1

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 24

(26)

− 25 −

(TR07-04A)

Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品

NO.

符号 INDEXPARTS NO.

部品番号 PARTS NAME 部品名称 DWG. NO.

図面番号

TYPE SPECIFICATION 形式 仕様

QTY/UNIT REMARKS

LXE10E- 備考 A36 A36A

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 25

(27)

− 26 −

(TR07-04A)

Parts related with the unit(inside) 庫内関連部品

C36詳細(Detail of C36)

C23 詳細 (Detail of C23)

C25

DSS(Green・Red)

C24

SS(Green)

<Without recorder>

<Without recorder>

C37 詳細 (Detail of C37) C27

DRS(Blue・Red)

C26

RS(Blue)

E14 F72 E14

C37 C7

C34 C36

C18

C13 C37

C15 C1-1 C8 C1-2

C2

Option

C12

Option

C3 C6 C6

C5

C4

C19

C19

C23 C17

C29 B21

B21

C31

C33

C14 C35

C16 C21

C9

C38

C28

C30 C30

C39 E57 詳細 (Detail of E57)

PUTTY

(Equivalent of NEO-SEAL B-1) Sealing compound (KE44RTV or its equivalent)

E57

INSIDE

OUTSIDE

シール剤

(KE44RTV又は相当品)

パテ

(ネオシールb-1相当品)

E57

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 26

(28)

− 27 −

(TR07-04A)

Parts related with the unit(inside) 庫内関連部品

NO.

符号 INDEXPARTS NO.

部品番号 PARTS NAME 部品名称 DWG. NO.

図面番号

TYPE SPECIFICATION 形式 仕様

QTY/UNIT REMARKS

備考

C1-1 A 0955340 Three phase AC fan motor 三相交流ファン電動機 3PA07524-5 SPRK91A-42

C1-2 A 0955333 Three phase AC fan motor 三相交流ファン電動機 3PA07524-4

C2 B 0777519 Fan brade(inside) プロペラファン(庫内側) P32P11F

C3 1686584 Center stay 中央ステー(裏板SUS 0.8t仕様)3P164565-1

C4 1686577 Side stay サイドステー(1)(裏板SUS t0.8仕様)3P164449-1

C5 1701159 Side stay(2) サイドステー(2)(裏板SUS t0.8仕様)3P164450-1

C6 1686591 Rear stay 背面ステー(型材・裏板SUSt0.8仕様)3P165208-1

C7 1700930 Casing frame, evaporator 蒸発器枠(1)ファンカバーSUS t0.8仕様 2P164446-1 C8 1700947 Casing frame, evaporator 蒸発器枠(2)ファンカバー t0.8SUS仕様 2P164446-2 C9 1726569 Fan guide fixing plate ファンガイド固定板(ファンカバーSUSt0.8S仕様) 3P165414-1 C12 1667088 Fan guide ass'y ファンガイド組立品(レヒート・樹脂製サーミスタ)3P166890-3

C13 1667172 Set plate, fan motor 電動機取付脚 3P171676-1

C14 1622434 Rear plate(lower) 裏板(下)(裏板SUS t0.8仕様)2P163839-2

C15 1496990 Shield plate 遮蔽板 4P123922-1

C16 1686926 Supply sensor inspection door サプライセンサ点検蓋(裏板SUS t0.8仕様)4P166062-1

C17 1686205 Rear plate(upper) 裏板(上)(裏板SUS t0.8仕様)2P163840-2

C18 1266485 Partition plate(drain outlet) 仕切板(ドレン出口) 4P011317-1 C19 1135978 Reinforce plate, fan motor 補強板(ファン電動機台) 4P011316-1

C21 1135125 Hinge 蝶番 3P043374-1

C26 A 1713354 Sensor(RS) センサー(RS) 3PA61769-18 Refer to Page56

C35 1496976 Rear plate(middle) fixture 裏板(中)固定具 4P105391-1

C37 1667280 RH sensor mounting plate RHセンサ固定板 4P164832-1

C23 1605466 Mounting plate サプライセンサ取付板 4P144433-1

C24 A 1713330 Sensor(SS) センサー(SS) 3PA61769-16 Refer to Page56

C27 A 1713361 Sensor(DRS) センサー(DRS) 3PA61769-19 Refer to Page56

C28 860015 Universal nut 自在ナット R4713188-1

C29 1685170 Pan head screw ナベ小ネジM5SUS(±穴付)4P167690-1

C30 860005 Washer, speed bolt スピードボルト用座金 R4713334

C31 840002 Drop out prevention washer 脱落防止座金 R4718607-6

C33 1685187 Washer 木材座金M5用(φ20) 4P170127-5

C34 1380848 Cover カバー 3P090387-1

1 1 2 1 1 1 4 1 1 1 1 4 1 1 1 1 1 4 1 1 1

1 1 1 20

1 2 21

1 2 1

C25 A 1713347 Sensor(DSS) センサー(DSS) 3PA61769-17 1 Refer to Page56

B21 1605244 Therminal fixing plate, Resin サーミスタ固定具(樹脂) 3P124175-1 3

E14 0508162 Resin clamp 樹脂バンド NE41015-3 1

E57 1267091 Wiring protection bush 配線保護ブッシュ 4P023920-1 BLACK 2

F72 A 1780284 Humidy sensor(HUS) 湿度センサー 3PA61738-3 RHU-600A-D2 1

C39 860011 Speed bolt スピードボルト(M6) 4P048680-1 1

LXE10E- A36 A36A

1 1 2 1 1 1 4 1 1 1 1 4 1 1 1 1 1 4 1 1 1 1 1 1 1 20

1 2 21

1 2

1 3

2

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 27

(29)

− 28 −

(TR07-04A)

Parts related with refrigerant piping(inside) 庫内冷媒配管関連部品

D6

D4詳細(Detail of D4)

D5詳細(Detail of D5)

E63

D5 D7

D4 E60

D3-1 D3-10

D3-6 D3-2

D3-2

D1

D3-4 D3-3

D2 D8

D9

D3-5 D3-7

D3

D3-9 D3-8 D4

D5

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 28

(30)

− 29 −

(TR07-04A)

Parts related with refrigerant piping(inside) 庫内冷媒配管関連部品

When ordering the parts whose No. are not shown in the PARTS NO. column, be sure to describe DWG. NO..

部品番号欄が空白になっている部品は、図面番号で、指示願います。

NO.

符号 INDEXPARTS NO.

部品番号 PARTS NAME 部品名称 DWG. NO.

図面番号

TYPE SPECIFICATION 形式 仕様

QTY/UNIT REMARKS

備考

D1 1683927 Evaporator ass'y 蒸発器組立品 2P163797-1 CRB-LXE10E9

D2 1683934 ass'y for pipe of drain pan ドレンパン配管組立品(レヒート)2P167639-2 D3 1793778 Heart exchanger ass'y with insulation 熱交換器防露筒組立品(標準・P&O)3P186056-2

D3-1 Double tube heat exchanger ass'y 二重管式熱交換器組立品 2P186057-2

D3-2 1549762 Insulation tube, gas pipe(1) ガス配管(1)防露筒 3P114518-1 D3-3 1683958 Insulation tube, liquid pipe(1) 液配管(1)防露筒 3P167441-1 D3-4 1683965 Insulation tube, liquid pipe(2) 液配管(2)防露筒 3P167441-2

D3-5 1380918 Thermal insulation tube 断熱筒(熱交外管) 4P103439-1

D3-6 1380925 Thermal insulation tube 断熱筒(熱交外管) 4P103439-2

D3-7 1380932 Thermal insulation tube 断熱筒(熱交外管) 4P103439-3

D3-8 1380949 Thermal insulation tube 断熱筒(熱交外管) 4P103439-4

D3-9 1549971 Thermal insulation, gas pipe(3) ガス配管(3)防露筒 3P114518-4 D3-10 1549988 Thermal insulation, liquid pipe(3) 液配管(3)防露筒 4P110520-2

D4 A 156282J Senser(EIS) センサー(EIS) 3P012118-2 Refer to Page56

D5 A 156283J Senser(EOS) センサー(EOS) 3PA61769-15 Refer to Page56

D6 1266308 Filter フィルタ 3P032328-1

D7 0423968 Mounting spring,thermistor サーミスタ取付バネ 4PA38890-1

D8 1713967 Reheat coil inlet pipe レヒートコイル入口管(塗装無)MSL 3P158828-2 D9 1713974 Reheat coil outlet pipe レヒートコイル出口管(塗装無)MSL 3P158829-2

E60 1267293 Thermal insulation tube 断熱筒配管緩衝材 4P011309-4

1

1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 3 1 1 2

E63 1267154 Insulation tube, evaporater header 蒸発器ヘッダー防露筒 4P073525-1 1

LXE10E- A36 A36A

1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 3 1 1 2 1

D1 1787470 Evaporator ass'y 蒸発器組立品 2P195931-1 CRB-LXE10E15 1

P17-29̲PL̲LXE10E-A36.Qx  07.12.6 5:39 PM  ページ 29

(31)

− 30 −

(TR07-04A)

Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等)

E断面(Section of E) B 詳細 (Detail of B)

Tie wrap

Wires

C 詳細 (Detail of C)

E91 E60

E11

E13

B E

E

C

E83 E82

E79

E83 Condenser coil

E87

E86 E87

P30-37̲PL̲LXE10E-A36.Qx  07.12.6 5:45 PM  ページ 30

(32)

− 31 −

(TR07-04A)

Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等)

E32

E8

E7

E33

E34 E2

※ (L = XX mm) と表記のものは、緩衝ゴム(E35)の長さです。(配管のサイズに合わせて切って使用ください。)

※ (L = XX mm)  indicates the length of cushion rubber E35.(Cut to suit pipe size.) 矢視A/B(View A/B)

E29

E90

E90

E90

E78

E16 E16

矢視 D(View D)

受液機器部詳細 (Receive part detail)

ドライヤー部詳細 (Dryer part detail)

 圧力センサー配管部詳細 (Pressure tranducer detail)

E17

E7/8

E22

E15

E84 E22

E6

E6 B

A

E5

E4

E88 E61

E21

(L=60mm) E89 E22 E26

RSV

P30-37̲PL̲LXE10E-A36.Qx  07.12.6 5:45 PM  ページ 31

(33)

− 32 −

(TR07-04A)

Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等)

EOS E60

矢視A(VIEW A)

E15

E15

E11 E12

A

E23 E52 E20

E62 E78

E79 E79

P30-37̲PL̲LXE10E-A36.Qx  07.12.6 5:45 PM  ページ 32

(34)

− 33 −

(TR07-04A)

Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等)

FAN GUIDE ファンガイド

E45 E37

E46

E46 E38

E37 E41

E54

E36

E39

E39

P30-37̲PL̲LXE10E-A36.Qx  07.12.6 5:45 PM  ページ 33

(35)

− 34 −

(TR07-04A)

Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等)

E69

E75 E70

E63 E76

E64

E67

E66 E65

E93 E77

E61

E78 E72

P30-37̲PL̲LXE10E-A36.Qx  07.12.6 5:45 PM  ページ 34

参照

関連したドキュメント

Greenberg and G.Stevens, p-adic L-functions and p-adic periods of modular forms, Invent.. Greenberg and G.Stevens, On the conjecture of Mazur, Tate and

We obtain a ‘stability estimate’ for strong solutions of the Navier–Stokes system, which is an L α -version, 1 &lt; α &lt; ∞ , of the estimate that Serrin [Se] used in

The proof uses a set up of Seiberg Witten theory that replaces generic metrics by the construction of a localised Euler class of an infinite dimensional bundle with a Fredholm

Using the batch Markovian arrival process, the formulas for the average number of losses in a finite time interval and the stationary loss ratio are shown.. In addition,

While conducting an experiment regarding fetal move- ments as a result of Pulsed Wave Doppler (PWD) ultrasound, [8] we encountered the severe artifacts in the acquired image2.

Based on sequential numerical results [28], Klawonn and Pavarino showed that the number of GMRES [39] iterations for the two-level additive Schwarz methods for symmetric

For X-valued vector functions the Dinculeanu integral with respect to a σ-additive scalar measure on P (see Note 1) is the same as the Bochner integral and hence the Dinculeanu

We also show that the Euler class of C ∞ diffeomorphisms of the plane is an unbounded class, and that any closed surface group of genus &gt; 1 admits a C ∞ action with arbitrary