高精度 5 軸加工技術マニュアル ( 改訂版 ) 平成 22 年 10 月 四国地域イノベーション創出協議会
121
0
0
全文
図
+2
Outline
関連したドキュメント
(注1)平成18年度から、
マイ クロ切削 システ ムの 高度化 にむ けて... 米山 ・陸:マ イク 口旋削加工
min, temperature at tool flank of a TiAlN-coated carbide tool is approximately 40~50ºC lower than that of a non- coated carbide tool regardless of cutting fluids. Width of a flank
Three kinds of wheel have under the conditions ranging from conventional grinding speed to 12000.. made in which
22 日本財団主催セミナー 「memento mori 広島− 死 をみつめ, 今 を生きる−」 を広島エリザベト音楽大
「地方債に関する調査研究委員会」報告書の概要(昭和54年度~平成20年度) NO.1 調査研究項目委員長名要
注)○のあるものを使用すること。
※短期:平成 31 年度~平成 32 年度 中期:平成 33 年度~平成 37 年度 長期:平成 38 年度以降. ②