EPOX Maskin AB___________________________________________________________
Postadress Besöksadress Telefon Fax e-post Hemsida Version
Box 6060
Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0
192 06 Sollentuna Sollentuna
Reservdelskatalog
MIKASA MVC-50
vibratorplatta
PARTS REMARK INDEX
How to read the marks and remarks used in this parts book.
Section 1 : Explanation of Code Use In “MRK” Column
OO : Interchangeable between the new part and the old one.
XX : Not Interchangeable between new and old.
OX : New part is usable for the old machine but the old part is not usable for the new machine.
XO : The old part is usable for the new machine but the new part is not usable for the old machine.
Note : In case of the lack of interchangeability between the new part and old part,a new part may be used by replacing
all other parts found in the assembly. In this case, refer to section 2 for instruction on identifying other parts invo-
lved in a new assembly.
AD : Newly established(added)
DC : Suspended(discontinued)
NC : Part number changed
QC : Quantity used has been changed
NS : Not supplied individually but supplied in an assembly or a group.
AS : Special part designed to allow interchangeability between new and old part.
CR : Correction
Section 2 : Items Found In “Remark” Column
Serial Numbers − Where indicated, this indicates a serisl number range (inclusive) where a particular part is used.
Model Number − Where indicated, this shows that the corresponding part is utilized only with this specific model
number or model number variant.
# or* : All parts with the same number following # or* belong to the same assembly. this part cannot be interchanged
individually with any other assemblies to replace an old part (indicated by #), with a new part(indicated by*),
then all other parts of that assembly must be replaced with new ones.
Note : If more than one of the same reference number is listed, the last one listed indicates newest(or latest)part available.
Section 3: Example
REF NO. PART NO.
PART NAME
Q’TY
MRK REMARKS
457(1)
5122-09230
Hinge Metal, Upper/24g
1
-1070 #3 (5)
457(2)
5072-09420
Hinge Metal, Upper M16
1
OX(3) U1071-(6)*3(7)
(1) Old part
(2) New part
(3) New part usable with old machine, but old part not usable with new machine (reference section 1).
(4) Old part number is used through this machine serial number.
(5) Old part, used in an assembly with other parts marked with #3. To use this part on a new machine, all other parts
in this assembly must be replaced with old ones.
(6) New part put into use starting with this serial number and is still current.
(7) New part used in an assembly with other parts marked*3, to use this part as a replacement for an old part, all
other*3 marked parts must be changed at the same time.
Section 4: Items Found In “MK2” Column
(only for suspended products)
! OO (“OO” is shown in figure) : The part shown in lower line is supplied.
! SD : Not available due to termination of production.
! NS : Not supplied individually, but supplied in an assembly or a group.
! PD : Supplied as unit product.
SS : Not available after stock run out.
部品変更マークの見方
1.パーツリスト中で使用されている項目および記号の意味は下記の通りです。
MRK欄の記号の意味
OO:新、旧部品は相互に互換性あり
XX:新、旧部品は相互に互換性無し
OX:新部品は、旧部品の代わりに使用できます。その逆は使用できません。
XO:旧部品は、新部品の代わりに使用できます。その逆は使用できません。
AD:新規追加使用となった部品
DC:使用を中止した部品
NC:部品コードナンバーの変更
QC:使用個数の変更
NS:単品での販売をしない部品
AS:部品変更に伴い新旧部品の互換性を持たせるための特殊部品
CR:誤記訂正(正規部品)
注記1:個々の新、旧部品で互換性が無い場合でも、複数の部品を同時に交換する事により、新部品を旧部品の
代わりに使用できる場合が有ります。この場合、下記の REMARKS(備考)欄に記号*O,#Oが記入
されています。
MK2欄の記号の意味
!OO(OO内は数字):供給する補用部品の互換部品番号(MK2欄に!のある部品は供給出来ません)
!SD(SD) :生産終了等のため供給出来ない部品
!NS(NS) :単品での販売を行わない部品(アッシでの販売)
!PD(PD) :製品価格表に価格が表記されており、部品での販売をしない部品(製品で販売)
SS :生産終了等のため在庫の販売終了後は供給出来ない部品
REMARKS(備考)欄の記号の意味
*O,#O :互換性のある部品グループを示します。 例)*1:新部品のグループ
#1:*1に対応する旧部品のグループ
−OOOO :スペックNo.または製造番号OOOO号機まで使用
OOOO− :スペックNo.または製造番号OOOO号機から使用
例)−1001:1001号機まで使用
1002−:1002号機から使用
注記2:互換性の無い設計変更を行った場合、参考としてREMARKS(備考)欄に適用号機またはスペック
No.を明記して有りますので、部品発注時にご参照ください。
注記3:部品表作成の都合上、MK2欄が省略される場合、各記号が指定欄以外に記入される場合および記号が
重複する場合があります。
2.使用例
Ref No. PART No.
部品名称 Q’TY
MRK
REMARKS
1 1111-11111
リンク
1
1 1111-22222
リンク
1
OO
2 2222-22222
レバー
1
#1 −1150
2 2222-33333
レバー
1
XX
*1 1151−
3 3333-33333
コネクター
1
AD
*1 1151−
(注意:同一 Ref No.で示す部品は新旧両部品がある事を示します。この場合、旧部品の下に新部品を記し、旧
部品との互換性を新部品のMRK欄に示します。)
1 OO 【OO】部品番号 1111-11111 の旧リンクは、部品番号 1111-22222 の新リンク
に
変更されたもので、新旧部品の相互に互換性があります。
2 #1 −1150 【XX】部品番号 2222-22222 の旧レバーは、部品番号 2222-33333 の新レバー
2 XX *1 1151− と交換出来ません。
3 AD *1 1151− 【AD】部品番号 3333-33333 の新コネクターは新規追加になった部品です。
【#1、*1】旧部品のグループ(#1のマークで示した部品)は、新部品の
グループ(*1のマークで示した部品)と全ての部品を交換すること
により互換性があります。
【-1150、1151-】部品番号 2222-22222 の旧レバーは、製造番号 1150 号機まで
使用されています。また、部品番号 2222-33333 の新レバーと部品番号
3333-33333
の新コネクターは製造番号 1151 号機から使用されています。
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 # 8+$2.#6'#;) 8+$4#6+0)2.#6'/8%) 5*1%-#$514$'&:* 076/ 59/ $1.6:*5929 '%%'064+%416#614/8%) 27..';#5 9#5*'4 $1.6:*59 -';::4 $'#4+0)% 2#%-+0)8+$/8%) %#5'%18'44/8%) $1.6:*59 4 $1.6:6 59/ 29/ 2.7):. 2#%-+0)%7 %#5'%18'4./8%) 1+.5'#.6% 51%-'6*'#&$1.6:6 %18'45'#.8+$/8%)
8+$4#6+0)2.#6'8+$4#614
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 $#5'/8%) , $#5'/8%) 1: , $'.6%18'4+0/8%) , $'.6%18'4+0/8%) 1: , %18'45'#.')/8%) $'.6%18'4176/8%) 2.#6'$'.6%18'4/8%) $1.6:*59 4 $1.6:6 59/ $1.6:*5929 *#0&.'/8%) *#0&.'/8%)%*41/#6' (14'21: *#0&.'56122'4/8%) %1..#4. $1.6:6 076/ 9#5*'4 59/ *11-/8%) *11-/8%)%*41/#6' (14'21: 47$$'4%#2&-2 $1.6:*5929 $1.6:* 59/ 29/ 076/ 076/ 59/ *#0&.'.19'4:/8%) 126+10 *#0&.'722'4/8%) 126+10 )4+2$1.6:: 126+10 14+0)2 126+10
$#5'*#0&.'
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 '0)+0'#;'*/8%),20 ,#2#0 '0)+0'#;'*/8%)':2 ':2146 -';:: -'; 52#%'4::%.76%* %.76%*#;#9 %.76%*5*#(6#;/849 %476%*27..;#5& 56124+0)5 56124+0)#4 $'#4+0)&&7 9#5*'4 $1.6:6 59/ 8$'.6#$.7'42( '0)+0'076 '0)+0'0764'#4/8% $1.6:6 59/ 29/ '#46*9+4' 29/ 0;.10076/
'0)+0'
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 &'%#./+-#5#//;'..19 '#42416'%6+10.#$'. &'%#.8$'.642( &'%#.'%01+5'4'3.9# '7 &'%#.%#76+1002 ,#2#0 &'%#.%#76+10 ':2146 &'%#.%#76+10 ,#2#0 &'%#.%#76+10 ':2146 &'%#.%#76+10/#07#. ,#2#0 &'%#.%#76+10/#07#. ':2146 &'%#.�)'4 ,#2#0 &'%#.�)'4 ':2146 2.#6'5'4+#.01/8%)4 ,#2#0 2.#6'5'4+#.01/8%)* ':2146)* 2.#6'5'4+#.01)*/3 /3)* 2.#6'5'4+#.01/8%) ':2146 &'%#.9+6*176'0)+0'1+. ':2146
0#/'2.#6'&'%#.
EPOX Maskin AB___________________________________________________________
Postadress Besöksadress Telefon Fax e-post Hemsida Version
Box 6060
Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0
192 06 Sollentuna Sollentuna
Reservdelskatalog
EH12-2D
PARTS REMARK INDEX
How to read the marks and remarks used in this parts book.
Section 1 : Explanation of Code Use In “MRK” Column
OO : Interchangeable between the new part and the old one.
XX : Not Interchangeable between new and old.
OX : New part is usable for the old machine but the old part is not usable for the new machine.
XO : The old part is usable for the new machine but the new part is not usable for the old machine.
Note : In case of the lack of interchangeability between the new part and old part,a new part may be used by replacing
all other parts found in the assembly. In this case, refer to section 2 for instruction on identifying other parts invo-
lved in a new assembly.
AD : Newly established(added)
DC : Suspended(discontinued)
NC : Part number changed
QC : Quantity used has been changed
NS : Not supplied individually but supplied in an assembly or a group.
AS : Special part designed to allow interchangeability between new and old part.
CR : Correction
Section 2 : Items Found In “Remark” Column
Serial Numbers − Where indicated, this indicates a serisl number range (inclusive) where a particular part is used.
Model Number − Where indicated, this shows that the corresponding part is utilized only with this specific model
number or model number variant.
# or* : All parts with the same number following # or* belong to the same assembly. this part cannot be interchanged
individually with any other assemblies to replace an old part (indicated by #), with a new part(indicated by*),
then all other parts of that assembly must be replaced with new ones.
Note : If more than one of the same reference number is listed, the last one listed indicates newest(or latest)part available.
Section 3: Example
REF NO. PART NO.
PART NAME
Q’TY
MRK REMARKS
457(1)
5122-09230
Hinge Metal, Upper/24g
1
-1070 #3 (5)
457(2)
5072-09420
Hinge Metal, Upper M16
1
OX(3) U1071-(6)*3(7)
(1) Old part
(2) New part
(3) New part usable with old machine, but old part not usable with new machine (reference section 1).
(4) Old part number is used through this machine serial number.
(5) Old part, used in an assembly with other parts marked with #3. To use this part on a new machine, all other parts
in this assembly must be replaced with old ones.
(6) New part put into use starting with this serial number and is still current.
(7) New part used in an assembly with other parts marked*3, to use this part as a replacement for an old part, all
other*3 marked parts must be changed at the same time.
Section 4: Items Found In “MK2” Column
(only for suspended products)
! OO (“OO” is shown in figure) : The part shown in lower line is supplied.
! SD : Not available due to termination of production.
! NS : Not supplied individually, but supplied in an assembly or a group.
! PD : Supplied as unit product.
SS : Not available after stock run out.
部品変更マークの見方
1.パーツリスト中で使用されている項目および記号の意味は下記の通りです。
MRK欄の記号の意味
OO:新、旧部品は相互に互換性あり
XX:新、旧部品は相互に互換性無し
OX:新部品は、旧部品の代わりに使用できます。その逆は使用できません。
XO:旧部品は、新部品の代わりに使用できます。その逆は使用できません。
AD:新規追加使用となった部品
DC:使用を中止した部品
NC:部品コードナンバーの変更
QC:使用個数の変更
NS:単品での販売をしない部品
AS:部品変更に伴い新旧部品の互換性を持たせるための特殊部品
CR:誤記訂正(正規部品)
注記1:個々の新、旧部品で互換性が無い場合でも、複数の部品を同時に交換する事により、新部品を旧部品の
代わりに使用できる場合が有ります。この場合、下記の REMARKS(備考)欄に記号*O,#Oが記入
されています。
MK2欄の記号の意味
!OO(OO内は数字):供給する補用部品の互換部品番号(MK2欄に!のある部品は供給出来ません)
!SD(SD) :生産終了等のため供給出来ない部品
!NS(NS) :単品での販売を行わない部品(アッシでの販売)
!PD(PD) :製品価格表に価格が表記されており、部品での販売をしない部品(製品で販売)
SS :生産終了等のため在庫の販売終了後は供給出来ない部品
REMARKS(備考)欄の記号の意味
*O,#O :互換性のある部品グループを示します。 例)*1:新部品のグループ
#1:*1に対応する旧部品のグループ
−OOOO :スペックNo.または製造番号OOOO号機まで使用
OOOO− :スペックNo.または製造番号OOOO号機から使用
例)−1001:1001号機まで使用
1002−:1002号機から使用
注記2:互換性の無い設計変更を行った場合、参考としてREMARKS(備考)欄に適用号機またはスペック
No.を明記して有りますので、部品発注時にご参照ください。
注記3:部品表作成の都合上、MK2欄が省略される場合、各記号が指定欄以外に記入される場合および記号が
重複する場合があります。
2.使用例
Ref No. PART No.
部品名称 Q’TY
MRK
REMARKS
1 1111-11111
リンク
1
1 1111-22222
リンク
1
OO
2 2222-22222
レバー
1
#1 −1150
2 2222-33333
レバー
1
XX
*1 1151−
3 3333-33333
コネクター
1
AD
*1 1151−
(注意:同一 Ref No.で示す部品は新旧両部品がある事を示します。この場合、旧部品の下に新部品を記し、旧
部品との互換性を新部品のMRK欄に示します。)
1 OO 【OO】部品番号 1111-11111 の旧リンクは、部品番号 1111-22222 の新リンク
に
変更されたもので、新旧部品の相互に互換性があります。
2 #1 −1150 【XX】部品番号 2222-22222 の旧レバーは、部品番号 2222-33333 の新レバー
2 XX *1 1151− と交換出来ません。
3 AD *1 1151− 【AD】部品番号 3333-33333 の新コネクターは新規追加になった部品です。
【#1、*1】旧部品のグループ(#1のマークで示した部品)は、新部品の
グループ(*1のマークで示した部品)と全ての部品を交換すること
により互換性があります。
【-1150、1151-】部品番号 2222-22222 の旧レバーは、製造番号 1150 号機まで
使用されています。また、部品番号 2222-33333 の新レバーと部品番号
3333-33333
の新コネクターは製造番号 1151 号機から使用されています。
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 %4#0-%#5'%2 5&5''2. %4#0-%#5'%2 :: 8#.8')7+&'15 18'45+<' 1+.5'#. 1+.5'#.8%:: #& $#..$'#4+0)% $#..$'#4+0) :: &19'.2+0 567& 567& 567& 2.7) /8% 2.7) () )#5-'6 /8% )#5-'6 () 70+10 /8% 5'#.9#5*'4 /8% /#+0$'#4+0)%18'4%2 /8% /#+0$'#4+0)%18'4%2 ()8) 1+.5'#. $#..$'#4+0)% )18'4014)'#4%1/2. )18'40145.''8' 1+.)#7)' 1+.)#7)' 91+. 5'0514 * 1+.)#7)'%2'; 8)8 : )#5-'6 : )#5-'6 91+. 5'0514 )#5-'6$'#4+0)%18'4 $1.6#0&9#5*'4#55CRQU; 2.7) /8% 5'#.9#5*'4 /8% 5*'.6'42.#6' 91+. 5'0514 5%4'9#0&9#5*'4#; 91+. 5'0514 %;.+0&'4*'#&%2'* )#5-'6*'#&'*& (.#0)'$1.6 41%-'4%18'4 )#5-'641%-'4%18'4 &19'.2+0 (.#0)'$1.6 $4'#6*'4%18'4%2 $4'#6*'42.#6'%2 )#5-'6$4'#6*'4%18'4 (.#0)'$1.6 47$$'42+2'::/ )#5-'65'6'* 56'/5'#. #& '2#
%4#0-%#5'
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 %4#0-5*#(6%2 %4#0-5*#(6%2 :: %4#0-5*#(6%2 ()8 52#%'46 6 5'.'%6 52#%'46 6 5'.'%6 52#%'46 6 5'.'%6 076 524+0)9#5*'4 911&47((-'; -'; %100'%6+0)41&#; %100'%6+0)41&$1.6 2+56102+0 * 2+561056& 56& * 2+561015'* 15// 2+561015// 15// 2+56104+0)5'656& 56& 2+56104+0)5'615 15// 2+56104+0)5'615 15// %.+2
%4#0-#0&2+5610
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 %#/5*#(6%2 4'.'#5'.'8'4'*& 524+0)2+0 50#24+0) 6#22'6 8#.8'524+0) 524+0)4'6#+0'4 +06#-'8#.8' ':*#7568#.8' -# %1..'68#.8' 275*41& 41%-'4#4/'* $1.62+816 076'* )7+&'2.#6' /7((.'4%2 /7((.'4%18'4 /7((.'4%18'4/8%/%& )#5-'6/7((.'4 076 6#22+0)$1.6 6#22+0)$1.6 (.#0)'$1.6 &'(.'%614%2 6#22+0)5%4'9'; ':*#7562+2'%18'4 +06#-'2+2'%2 567& #+4%.'#0'4#;/8% /8%8) 9 #+4%.'#0'4#55; /8%89 $ #+4%.'#0'4#;'*() 8)()8 2#%-+0) /8%889 $ )#5-'6#+4%.'#0'4 ()8 2.#6' ()8 %.'#0'4'.'/'06 /8%8) 9 %.'#0'4'.'/'06 /8%89 $ '.'/'06%.'#0'4 8)()8 +057.#614 )#5-'6+057.#614 )#5-'6+057.#614 (.#0)'$1.6 )#5-'6+057.#614 )#5-'6+057.#614 076COR9#5*'4#;8 /8%889 $ (.#0)'076 ()8 (.#0)'076 -01$%2 /8%889 )41//'6&)- /8%889
+06#-'':*#756
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 )18'4014.'8'4 )18'40145*#(6 )18'401441&%2 41&524+0) %.+2 $1.6COR9#5*'4#; 076 )18'4014524+0) 9#5*'4 #& 52''&%10641.#55; 52''&%10641.#; :: -01$ 56122.#6' 5%4'92#0*'#& +&.'5'6524+0) 524+0)9#5*'4 5%4'9 076 (.#0)'$1.6 9+4'$4#%-'6 5%4'9 076
)18'401412'4#6+10
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 $.19'4*175+0)%2 $.19'4*175+0)%2$ /8%) .#$'.64#&'/#4- ,#2#0'5' .#$'.64#&'/#4- ':2146 .#$'.'0)+0'0#/' ,#2#0'5' .#$'.64#&'/#4-':2 ':2146 (.#0)'$1.6 *'#&%18'4 4'%1+.56#46'4#;'*& 52+4#.524+0) 4''. 56#46'4412'': 56#46'4-01$ 4#6%*'6 (4+%6+10524+0) 56#46'427..'; 4#6%*'6)7+&' 5'65%4'9 4'6740524+0) #& (.#0)'$1.6
%11.+0)56#46+0)
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 # (7'.6#0-%2'*& /8% 889 $ (7'.6#0-%2'*,$ )(8. % (7'.6#0-%29*+6'() () .#$'.%#76+10 ':2 .#$'.%#76+10 ,2/8%8) .#$'.%#76+10 ,2() .#$'.12 ,2/8% .#$'.%#76+10 ,28) (7'.6#0-%#2%2 (7'.(+.6'4 /8% (7'.(+.6'4 () (7'.)#7)'%2';$ () 5%4'9';5019 () (7'.564#+0'4#; 5%4''0564#+0'42( 1.&2.'8'4 5%4''0 0'9 47$$'42#%-+0)564#+0/ 1.&2.'8'4 %47$$'42#%-+0 0'9 %72 1.&2.'8'4 %72 0'9 (7'.2+2'%2 *15'%.#/2&';&; (.#0)'$1.6 %#4$74'614#;'*89 /8%89 %#4$74'614#;/8% /8%8) %#4$74'614#;'2#/8%8 11 '2# %#4$74'614#;8) 8)()8
(7'..7$4+%#06
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 6*4166.'8#.8' 6*4166.'8#.8' /8%89 5%4'9 %*1-'8#.8' 2+.16,'6 2,'60 /8%89 2+.165%4'9 524+0) &% 524+0) %*1-'.'8'4'*/8% 4+0) 5*#(6#; $1.6$8 4+0) 0''&.' 2+0 (%*#/$'4$1&; 2#%-+0) 2#%-+0)%*#/$'4 (.1#6 /#+001<<.' )7+&'*1.&'4 /#+0,'60 /#+0,'6 /8%89 5%4'9 5'#. &% 5'#. #&,7565%4'9 4+0) %#2 5'#. 524+0) 8 %#4$74'614#;'2#/8%8 /8%8) 9 %#4$74'614#;'*89 /8% %'989
%#4$74'614
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF
%QR[TKIJV/+-#5#5#0);1%1.6&#NN4KIJVU4GUGTXGF 01 2#4601 2CTVU0COG 3 6; /- /- 4'/#4-5 (.;9*''.%2 +)0+6+10%1+.%2 &% +)0+6+10%1+.%2'* $1.6#0&9#5*'4#55; 561259+6%*#; 6#22+0)5%4'9 %.#/2 2.7)6'4/+0#. 52#4-2.7)$4'5 52#4-2.7)%#2 -5 1+.5'0514%2 91+. 5'0514 9+4'%2 91+. 5'0514 %.#/2%1/2. 91+. 5'0514 %.#/2%2 91+. 5'0514 %.#/2%2 91+. 5'0514 $1.6#0&9#5*'4 $1.6#0&9#5*'4 91+. 5'0514