• 検索結果がありません。

Starting DIA Press the STANDB/ON key while simultaneously pressing those two keys of the main unit as indicated in the figure below. Keys of main unit

N/A
N/A
Protected

Academic year: 2021

シェア "Starting DIA Press the STANDB/ON key while simultaneously pressing those two keys of the main unit as indicated in the figure below. Keys of main unit"

Copied!
12
0
0

読み込み中.... (全文を見る)

全文

(1)

SERVICE MANUAL

1 0 0 9 9 8

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.

It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.

WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative.

IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division.

WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.

■ CONTENTS

自己診断機能(ダイアグ)... PIN CONNECTION DIAGRAM ...

P.O.Box 1, Hamamatsu, Japan

AV RECEIVER/AV AMPLIFIER

RX-V459/HTR-5940

2006 All rights reserved. This manual is copyrighted by YAMAHA and may not be copied or

redistributed either in print or electronically without permission.

(2)

Turn on the power while pressing these keys.

これらのキーを同時に押しながら、パワーオンする。

• Starting DIAG

Press the “STANDBY/ON” key while simultaneously pressing those two keys of the main unit as indicated in the figure below.

● ダイアグの起動

本体の下図に示すキーを同時に押しながら“STANDBY/ON” キーを押すと、ダイアグが起動します。

• Starting DIAG in the protection cancel

mode

If the protection function works and causes hindrance to trouble diagnosis, cancel the protection function as described below, and it will be possible to enter the DIAG mode. (The protection functions other than the excess current detect function will be disabled.)

Press the “STANDBY/ON” key while simultaneously pressing those two keys indicated in the figure above. At this time, keep pressing those two keys for 3 seconds or longer.

In this mode, the “SLEEP” segment of the FL display of the main unit flashes to indicate that the mode is DIAG mode with the protection functions disabled.

● プロテクション解除モードでの起動

プロテクションが動作することにより、故障箇所の診断に支障を きたすような場合は、次の方法によりプロテクションを解除した 状態でダイアグモードに入ることができます。(過電流検出以外の プロテクション動作を解除する) 上図のキーを同時に押しながら“STANDBY/ON”キーを押しま す。このとき、上図のキーを3秒以上押し続けてください。 このモードでは本体FLの“SLEEP”セグメントが点滅し、プロテ クションを解除した状態でのダイアグモードであることを知らせ ます。

CAUTION!

Using this product with the protection function disabled may cause damage to itself. Use special care for this point when using this mode.

注意! プロテクションを解除した状態でのダイアグモードは、危険な 状態でもプロテクションが作動しないため、動作させると、機 器を破壊することがあります。このモードを使用する場合は十 分注意してください。

● ダイアグの解除

① ダ イ ア グ を 解 除 す る 前 に 、 ダ イ ア グ メ ニ ュ ー N o . 9 の FACTORY PRESET (メモリーの初期化禁止/またはメモ リーの初期化)の設定をします。 ※ ユーザーメモリーを保持したい場合は、必ずP R E S E T INHIBITED(メモリー初期化禁止)を選択してください。 ② 本体の“STANDBY/ON”キーを押し、パワーオフにします。

Keys of main unit / 本体キー

• Canceling DIAG

1 Before canceling DIAG, execute setting for FACTORY PRESET of DIAG menu No.9 (Memory initialization inhibited or Memory initialized).

* In order to keep the user memory stored, be sure to select PRESET INHIBITED (Memory initialization inhibited).

2 Turn off the power by pressing the “STANDBY/ON” key of the main unit.

(3)

14 7 1 1 10 20 14 7 1 50 1 26 25 1 10 20 25 48 1 24 SN74LV157APWR SN74LVU04APWR SN74LV245APWR TRAN TC4013BP FF TC74VHCU04FT INVER W9816G6CH-7 SDRAM YAC520-EE2 S29AL004D70TF1020

• Diodes

Anode Cathode – + ~ ~ Anode Cathode ~ + ~ – Anode Cathode 1N4002S 1SS133,176 1SS270A 1SS355 1SS380 1T2 MTZJ13A 13V MTZJ15A 15V MTZJ15B 15V MTZJ2.4B 2.4V MTZJ27B 27V MTZJ30A 30V MTZJ5.1C 5.1V D2SBA20 1.5A 200V D5SB20 5A 200V MA8030-L 2.9V MA8051-M 5.1V MA8056-M 5.6V MA8068-L 6.6V MA8068-M 6.8V MA8075-H 7.7V MA8091-M 9.1V MA8100-M 10V MA8082-H 8.5V S1NB20 1A 200V S1NB60 1.0A 600V RB441Q-40 T-77 RB441Q-40 T-77 RB500V-40 RB501V-40 UDZ 3.6BTE-17 3.6V UDZ5.1B 5.1V

• Transistors

BCE E C B 2SA1015 Y 2SA933S Q,R 2SA949 O,Y 2SC1740S QRS 2SC1815 Y 2SC1890A D,E 2SC2229 O,Y 2SC2240 GR,BL 2SA1037K Q,R,S 2SC2412K Q,R,S DTA114ES DTC114EKA DTC114ES DTC124EKA DTC144ES 2SB1257 2SB1274 Q,R,S 2SA1708 S,T 2SA1770 S,T 2SC4488 S,T 2SC4614 S,T 2SD1938F S,T 2SA1695 O,P,Y 2SC4468 O,P,Y 2SD1915F S,T 2SD2014 2SK2158-T2B-A 2SK246 Y 2SK3288 2SK3850 B E C E C B BCE 2SC3326 A,B 2SC3837K T146 N,P 2SC3906K T146 R,S

(4)

2 A B C D E F G H I J 1 3 4 5 7 6 DVD CVBS Y C Y C Y C Y DVD DTV/CBL DVR DTV/CBL V-AUX DVR DVD Y Pb/Cb Pr/Cr Y Y Cb Cr Pb/Cb Pr/Cr L1/L2/L3 RX-V459, DSP-AX459, HTR-5940 models L1/L2/L3 OUT L1/L2/L3 L1/L2/L3 L1/L2/L3 L1/L2/L3 IN Y/ Cb/ Cr IN COMP0 COMP1 /CBYPASS BYPASS Y Pb/Cb Pr/Cr Y Pb/Cb Pr/Cr J model U, C, R, T, K, A, G, E, L models J model J model J model DTV/ CBL DVR CVBS /MON /MON /CNON /VR1 OUTPUT AMP LA73050 IC401 OUTPUT AMP NJM2581 IC290 Y Y Cb Cr Y Cb Cr Y Cb Cr Cb Cr CVBS Y C CVBS Y C Y C 15 14 12 3 IC402 1 5 15 14 12 3 IC403 VIC VIB VIA DVR OUT MONITOR OUT INPUT SELECTOR BYPASS 74HC4051 Input Selector 74HC4052 IC287(Cb, Y) IC288(Cr, L1) IC289(L3, L2) 6dB 6dB 6dB 6dB 6dB 6dB 6dB 6dB 6dB 1 3 8 6 33 29 31 24 20 22 12 17 15 3, 13 3, 13 2, 4, 5, 15, 14, 11 2, 4, 5, 15, 14, 11 5 C 15 14 12 3 IC404 1 5 U, C, R, T, K, A, G, E, L models U, C, R, T, K, A, G, E, L models U, C, R, T, K, A, G, E, L models RX-V459, DSP-AX459, HTR-5940 models RX-V459, DSP-AX459, HTR-5940 models

OPERATION

• See page 73 SCHEMATIC DIAGRAM

FUNCTION

• See page 72 →

SCHEMATIC DIAGRAM

(5)

A B C D E F G H I J 1 2 3 4 5 6 7

OPERATION

• See page 73 → SCHEMATIC DIAGRAM

DSP

POWER TRANSFORMER • See page 69-71 → SCHEMATIC DIAGRAM

DSP

• See page 69-71→ SCHEMATIC DIAGRAM

MAIN

• See page 74 →

SCHEMATIC DIAGRAM +B G -B +BL G -BL -VP FL2 +12 FL1 G -12 +5A E +5D +5V +3.3V IC54 +3.3V IC306 -5V IC103 +5.5V IC1 D1046 C1109 C1087 D1036 F3000/J3002 TE300 D3018 D3016 Q3007 RY301 Q3003 C1088 C1082 D1035 C1083 C1100 D1041, 1402, 1044, 1045 C1101 C1105 C1107 C1104 D133 C1106 +5.3V U, C models IC100 XMPWR +5V IC106 +1.2V IC53 +12V IC104 -30V RY105 RY105 /4ohms Q1068 -12V IC105 IC51 +5V IC102 G -5V +5V VE +5S G D1 Q1 D2 D3 s10 T3000 F3001 IC300, 302, 303 Power Detector /Reset Q3006, 3002 Microprocessor M30627 IC2 XL1 16MHz RY301 POWER SAVE POWER RELAY +5M +5BU +5.3X XGND +3.3V +1.2V DG +3.3D SELECTOR/VOLUME VIDEO SELECTOR TUNER RDS XM Net-module DSP XMPWR /4ohms POWER SAVE MUTE CONTROL SPEAKER RELAY POWER RELAY LIMITER CONTROL MODEL DETECT DEST. DETECT THM PLDET PRD PRV1 PRV2 /HP POWER DETECT PRI /RESET 6 17 53 96 99 120 121 122 123 124 128 3/ 69/ 114 /117/ 119 55 98 63/ 64 58/ 59 60/ 62 FL DRIVER IC301 FL DISPLAY V3000 IR REMOTE U3000 VOLUME SW300 INPUT SELECTOR SW301

TONE CONTROL/ DSP PROGRAM

Tack SW SW302 MAIN POWER SW SW323 SW302, 304, 306, 309- 319, 321, 322, 324 3/ 4/ 5/ 57 97 18 20 125/ 126 51/ 50/ 49/ 48/ 46 100- 104 54 47 7 8-10/ 15/ 16/ 23/ 24/ 26- 31 12/ 42- 45 34/ 35 69/ 84/ 86/ 88/ 89/ 117 83/ 90- 95 25/ 65- 68, 70- 74, 76- 81 115/ 116/ 111- 117

(6)

A

1

2

3

4

5

6

7

8

9

10

B

C

D

E

F

G

H

I

J

K

L

M

N

★ All voltages are measured with a 10MΩ/V DC electronic volt meter.

★ Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed.

★ Schematic diagram is subject to change without notice.

DSP 2/3

DIGITAL IN ANALOG IN PL/PR FL/FR SBL/SBR C/SW SL/SR 0.1 5.0 0 4.0 0 4.9 0.3 0 4.9 0.3 0 4.9 2.4 2.4 0.6 5.0 0 0 4.9 0 0 4.9 0 0.1 0 0 0.3 0 3.3 0.3 0.6 0 3.3 0 4.0 3.3 3.3 3.3 0 0 3.3 1.6 1.5 1.7 3.3 0 0 3.1 1.3 1.3 3.1 0 3.1 0 3.3 5.0 3.3 5.0 0 0 3.3 0 1.7 0 3.3 1.7 0 1.7 0 0 3.3 0 3.3 0 5.0 3.2 0.1 3.1 0.9 3.3 0.6 5.0 0.9 3.5 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 0.5 0 5.0 0 0 0.1 3.1 3.2 0 0.1 0.1 0.1 0.1 0 3.3 3.3 0 0.5 0.1 5.0 0 5.0 5.0 5.0 3.3 3.3 0 00 0 1.7 0.1 0 0 0 0 1.2 1.7 3.3 0 1.7 0 3.3 0 1.2 1.7 0 3.3 1.2 0 0 0 1.2 0 3.3 3.3 3.3 0 3.3 3.3 1.2 3.3 3.3 0 0 0 0 0 3.3 3.3 1.2 3.3 0 3.3 0 3.3 0 3.3 0.4 3.3 0.1 1.2 0.1 0.1 0 3.0 1.6 1.2 1.8 0 3.3 2.8 2.9 0 1.2 0.1 0.1 0.1 3.3 3.3 3.3 2.9 0 0.1 3.3 0.1 1.2 0.1 0.2 0 0.2 3.3 0.1 0.2 1.2 0 0.1 0.1 1.2 0.2 0.2 0.1 3.3 0 0.2 0.2 1.2 0.2 2.9 3.3 0 1.7 3.3 0 1.7 0 1.7 1.7 0 1.7 0 0 3.3 0 0 0 1.2 0.1 1.3 0 1.2 3.1 0.9 3.3 0 1.2 3.3 3.3 0.4 0 1.7 1.7 1.7 0 0.5 3.3 3.3 3.3 0 3.3 0.2 0.1 0 0.2 0.2 3.3 0.2 0 0.1 0.1 0.1 3.3 2.9 3.3 3.3 3.3 0 3.3 0.4 0.1 0.1 0.1 3.0 3.3 0 0.1 0.1 0 0.2 0.2 3.3 0.1 0 0.2 0.2 0.2 3.3 2.9 1.7 3.3 0.1 0.1 2.9 2.8 1.8 1.6 0 0.1 0 0 0.1 0.4 0.1 0.1 2.9 3.3 3.3 0 0 2.8 1.8 1.6 3.0 0.1 0.1 0.1 0 3.3 0 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 3.3 0.1 0.2 0.2 0.2 0.2 0.1 0.2 0.2 3.3 0 3.3 3.3 A-2 0 0 0 5.4 0.1 0.1 0 0 0 0 0.2 0.2 0.2 0.2 1.8 1.8 1.8 0 0 0 3.5 3.5 3.3 3.5 1.5 1.5 1.5 1.5 0 0 0 3.5 3.5 3.5 3.5 3.5 3.5 3.5 0 0 0 0 0 1.9 1.8 0.2 A-1

DSP

XMDT

DIR

BUFFER

16M SDRAM

4M ROM

SELECTOR

S29AL004D70TF1020

No replacement part available.

サービス部品供給なし

IC54 : NJM2885DL1-33

Low dropout voltage regulator

Thermal Protection Bandgap Reference VOUT VIN GND 1 3 2 4B 13 4A 12 4Y 11 3B 10 3A 9 3Y 8 1B 2 1Y 3 2A 4 2B 5 2Y 6 GND 7 IC63 : SN74AHCT08PWR

Quadruple 2-input positive-AND gates

Vcc 14 1A 1 Y 4 B 2 GND 3 IC61, 62 : SN74AHCT1G32DCKR

Single 2-input positive-OR gate

Vcc 5 A 1

IC64 : W9816G6CH -7

512K x 2 banks x 16 bits SDRAM

CLOCK BUFFER ADDRESS BUFFER CLK 35 18 CKE 34 A10 20 CS 17 RAS 16 CAS 15 WE 21 A0 ∼ 24 A3 27 A4 ∼ 32 A9 19 BA 2 DQ0 3 DQ1 5 DQ2 6 DQ3 8 DQ4 9 DQ5 11 DQ6 12 DQ7 39 DQ8 40 DQ9 42 DQ10 43 DQ11 45 DQ12 46 DQ13 48 DQ14 49 DQ15 14 LDQM 36 UDQM COMMAND DECODER REFRESH COUNTER REFRESH COUNTER DQ BUFFER COLUMN COUNTER MODE REGISTER CONTROL SIGNAL GENERATOR CELL ARRAY BANK #0 R O W D E C O D E R COLUMN DECODER SENSE AMPLIFIER CELL ARRAY BANK #1 R O W D E C O D E R COLUMN DECODER SENSE AMPLIFIER IC52 : SN74LVU04APWR Hex inverters 1A 1Y 2Y VCC 6A 1 2 3 4 11 2A 6Y 5A 12 13 14 3A 3Y 5Y 4A 5 6 7 8 4Y 9 10 GND 1 DIR A1 A2 A3 A4 A5 A6 A7 A8 GND Vcc OE B1 B2 B3 B4 B5 B6 B7 B8 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 IC65 : SN74LV245APWR

Octal bus transceiver with 3-state outputs

Input Selector RXOUT RX0 RX1 RX2 RX3 RX4 RX5/VI RX6/UI LPF TMCK/PIO0 TBCK/PIO1 TLRCK/PIO2 TDATA/PIO3 TXO/PIOEN

Cbit, Ubit Microcontroller I/F Data Selector Clock Selector Modulation & Parallel Port PLL XIN XOUT XMCK CKST SLRCK SBCK RLRCK RBCK RMCK SDIN RDATA RERR DO XMODE CI CE CL INT AUDIO/VO EMPHA/UO 1/N Demodulation & Lock detect 1 2 3 4 5 8 9 10 13 44 45 46 47 48 29 28 27 34 23 22 20 17 16 24 21 36 37 41 38 39 48 35 33 32 IC56 : LC89057W-VF4A-E

Digital audio interface transceiver

IC53 : R1172S121D-E2-F Power supply

V

DD

CE

Vref

Current Limit

V

OUT

GND

2 3 5 6 11 10 14 13 15 1 G A/B 4B 4A 3B 3A 2B 2A 1B 1A 4 7 9 12 1Y 2Y 3Y 4Y 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 A/B 1A 1B 1Y 2A 2B 2Y GND VCC G 4A 4B 4Y 3A 3B 3Y IC58 : SN74LV157APWR

Quadruple 2-line to 1-line data selectors/multiplexers

Y 4 B 2

GND 3

IC59 : SN74AHC1G08DCKR

2-input positive-AND gate

Vcc 5 A 1

POINT A-2 Pin 29 of IC56 POINT A-1 Pin 28 of IC55

IC66 : S29AL004D70TF1020

4M-bit COMS 3.0 volt-only boot sector flash memory

A1 A15 NC A14 A13 A12 A11 A10 A9 A8 NC NC WE# RESET# NC NC RY/BY# A17 A7 A6 A5 A4 A3 A2 1 16 2 3 4 5 6 7 8 17 18 19 20 21 22 23 24 9 10 11 12 13 14 15 A16 DQ2 BYTE# VSS DQ15/A-1 DQ7 DQ14 DQ6 DQ13 DQ9 DQ1 DQ8 DQ0 OE# VSS CE# A0 DQ5 DQ12 DQ4 VCC DQ11 DQ3 DQ10 48 33 47 46 45 44 43 42 41 40 39 38 37 36 35 34 25 32 31 30 29 28 27 26

In put/ Out put Buff ers

X- Decoder Y-Decoder Chip Enab le Out put Enable

Logi c Erase V olt ag e Generat or PGM Vo ltag e Generator Tim er VCC De te ct or State Contr ol Comm and Regi st er VCC VSS WE# BYTE# CE# OE# STB STB DQ0–DQ15 (A- 1) Sect or Sw itc hes

RY/ BY# RESET# Data Lat ch Y- Gating Cell M atrix Addr e ss La tc h A0– A17 100/16 100/16 100/16 &6 XM

(7)

A

1

2

3

4

5

6

7

8

9

10

B

C

D

E

F

G

H

I

J

K

L

M

N

★ All voltages are measured with a 10MΩ/V DC electronic volt meter.

★ Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed.

★ Schematic diagram is subject to change without notice.

DSP 3/3

ANALOG IN FRONT L DIGITAL IN C/SW SBL/SBR FRONT L SL/SR FL/FR SURROUND BACK L SURROUND L SUB WOOFER CENTER 1.7 1.3 0 3.3 1.7 3.3 3.3 0 0 0 1.7 0 0 3.3 0 5.0 2.5 2.5 2.5 2.5 5.0 3.3 3.1 1.7 1.7 1.7 1.7 0 5.0 1.7 2.5 2.5 2.6 0 5.1 2.5 2.5 2.5 2.5 0 1.7 0 0.5 5.1 2.5 8.8 5.1 8.8 0 5.1 0 0 0 0 3.3 0.1 0.1 0 1.7 0 0 3.3 0 1.7 1.7 1.7 1.7 1.7 1.7 5.0 2.5 0 0 2 .5 5.0 2.5 2.5 0 11.8 0 0 0 -11.9 0 0 0 11.8 0 0 0 -11.9 0 0 0 11.8 0 0 0 -11.9 0 0 0 11.8 0 0 0 -11.9 0 0 0 11.8 0 0 0 -11.9 0 0 to MAIN (2)_W1004 Page 74 J7 to FUNCTION (1)_CB202 Page 72 D2

DSP

SELECTOR

8ch DAC

2ch DAC

IC71-74, 75, 76 : NJM4565M

Dual operational amplifier

8 2, 6 3, 5 1, 7 4 V+ –INPUT +INPUT V– OUTPUT IC51 : NJM78M05DL1A Voltage regulator INPUT OUTPUT COMMON 2 3 5 6 11 10 14 13 15 1 G A/B 4B 4A 3B 3A 2B 2A 1B 1A 4 7 9 12 1Y 2Y 3Y 4Y 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 A/B 1A 1B 1Y 2A 2B 2Y GND VCC G 4A 4B 4Y 3A 3B 3Y IC67 : SN74LV157APWR

Quadruple 2-line to 1-line data selectors/multiplexers

IC68 : PCM1680DBQR

Audio digital-to-analog converter

IC70 : PCM1803DBR

Stereo A/D converter

IC69 : PCM1781DBQR

Audio digital-to-analog converter

(1) Open-drainoutputforthePCM1782

NOTE: Signal names in parentheses ( ) areforthe PCM1781.

Power Supply Enhanced Multilevel Delta-Sigma Modulator VOUTL 4 /8 Oversampling Digital Filter With Function Control Audio Serial Port BCK LRCK DATA Serial Control Port Zero Detect (TEST) SCK System Clock Manager MC (DEMP1) MS (DEMP0) Outp ut Amp and Lo w-Pass Fil ter

MD (MUTE) DAC VCOM System Clock AG N D VCC ZER O R/ZER O A (1) (ZER O A ) ZER O L/NA (1) Outp ut Amp and Lo w-Pass Fil ter DAC VOUTR (FMT) BCK VINL Reference VREF1 VREF2 VINR Delta-Sigma Modulator Delta-Sigma Modulator x1/64, x1/128 Decimation Filter With High-Pass Filter Power Supply AGND VCC DGND VDD

Clock and Timing Control Serial Interface Mode/ Format Control LRCK DOUT FMT0 FMT1 MODE0 MODE1 BYPAS OSR PDWN SCKI TEST Outp ut A mp and Low-P ass F ilter

Syst em Clock Manager Enhanced Multilevel DeltaœSigma Modulator DAC Serial Input I/F Function Control I/F System Clock

Zero Detect Power Supp ly DAC Outp ut A mp and

DAC

DAC Outp ut A mp and

DAC Outp ut A mp and

DAC Outp ut A mp and

VOUT1 VOUT2 VOUT3 VCOM VOUT4 VOUT5 VOUT6 Low-P ass F ilter

Low-P ass F ilter

Low-P ass F ilter

Low-P ass F ilter Low-P ass F ilter Outp ut A mp and A G ND2 VCC 2 A G ND1 VCC 1 DGND VDD ZER O 1 ZER O 2 BCK LRCK DATA1 (1, 2) DATA2 (3, 4) DATA3 (5, 6) DATA4 (7, 8) MS/ADR MC/SCL MD/SDA MSEL SCK 8 Oversampling Digital Filter With Function Controller

DAC Outp ut A mp and

DAC Outp ut A mp and

VOUT7

VOUT8

Low-P ass F ilter

Low-P ass F ilter

LC89057W-VF4A-E LC89057W-VF4AD-E

(8)

A

1

2

3

4

5

6

7

8

9

10

B

C

D

E

F

G

H

I

J

K

L

M

N

★ All voltages are measured with a 10MΩ/V DC electronic volt meter.

★ Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed.

★ Schematic diagram is subject to change without notice.

FUNCTION

ANALOG IN SUB WOOFER SURROUND BACK L/R SURROUND L CENTER FRONT L 0 0 0 0 11.9 -12.0 0 0 0 0 0 0 0 11.9 0 0.1 0.1 -11.9 -11.9 0 0.1 0 -11.9 0.1 0 -11.9 0.1 0 -11.9 0.1 0 0.8 0.1 0.1 0 0 -11.9 -11.9 0.1 0.1 0 0 0.8 0.8 10.1 9.4 9.4 0.1 0.1 0.1 0.1 0.1 0.1 -10.1 -10.1 -10.8 00 7.8 0 0 -7.7 -7.6 7.8 00 -6.9 7.1 -10.7 10.6 6.5 6.5 0 11.9 5.8 1.0 1.0 1.0 0 0.1 0.1 0.1 0.1 0.1 0.1 0 7.1 -6.9 0 0 0 0 0 0 0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0 0.1 0.1 0 0.1 0.1 0.1 0.1 0.1 0.1 0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0 0.1 0 0 0.1 0 0.1 0 0.1 0.1 0.1 0.1 0 0.1 0.1 0.1 0 0 0 0 0 0 0 0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 -6.9 0 7.1 0 0 0 0 0 0 0 0 0.1 0 0.1 0.1 0 0 0 0.2 0.3 0.2 5.5 5.8 2.5 3.2 3.2 5.3 0 3.1 3.1 0 0 2.7 C-2 0.7 0.1 0.7 0.1 0.1 0 -4.9 0 5.0 0 0 0 0 0 0.1 0.1 2.5 2.5 0.1 0.1 0 0.1 0 0 0 4.9 2.5 2.5 2.5 4.9 4.9 4.9 0.6 0.1 0.6 0.1 0.1 0.6 0.1 0.6 4.9 5.0 2.9 2.9 0.7 0.1 0.7 0.1 0.1 0 -4.9 0 5.0 0.1 0.1 0.5 0.5 0.1 0.6 0.6 0 -4.9 0 -4.9 0 -4.9 2.9 5.0 0.1 5.0 0.1 5.0 0.1 0 0.7 0.1 0.1 0.1 0.1 0 -5.0 0 5.0 0.4 0.1 0.3 0.1 0.1 0.6 0.6 0.1 0.1 5.0 5.0 5.0 to DSP_CB1 Page 69 B3 to MAIN (1)_W1028 P age 74 B3 to MAIN (1)_W1027 P age 74 B2 to OPERA TION (1)_W3002 P age 73 E9 to OPERATION (5)_W3007 Page 73 G6 to DSP_CB56 Page 71 C1 to OPERATION (2)_W2501 Page 73 L3 to OPERATION (2)_CB252 Page 73 J3 to DSP_CB2 Page 69 B7 to TUNER to POWER TRANSFORMER to OPERATION (4)_CB308 Page 73 D2

FUNCTION (2)

FUNCTION (1)

FUNCTION (4)

FUNCTION (3)

INPUT

SELECTOR

INPUT

SELECTOR

INPUT SELECTOR

OUTPUT

AMP

EXTENSION

SELECTOR

R, L models IC290 : NJM2581M Video amplifier 13VOUT1 11VOUT2 9 VOUT3 8 GND 10V+3 14V+1 12V+2 2 NEE1 4 VEE2 6 VEE3 7 PowerSave 5 VIN3 1 VIN1 3 VIN2 75 Driver 6dB AMP BIAS 75 Driver 6dB AMP BIAS 75 Driver 6dB AMP BIAS REF IC200 : BD3816K1

7-channel volume IC for 7-channel

BD3816K1 1 2 3 4 5 6 7 TREBLE RE C A RE C B RE C C FRL select 6.1ch select Input select BASS Output mode select Master Volume ING SW 8 9 10 80 79 11 12 13 14 15 73 22 23 24 78 77 76 75 74 16 17 18 19 20 21 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 43 42 41 49 48 47 46 45 44 72 71 70 69 68 67 66 65 25 26 27 28 29 30 31 33 34 35 36 37 38 39 40 LOGIC 32 + + AGND1 INA1 INA2 INB1 INB2 INC1 INC2 IND1 IND2 INE1 INE2 INF1 INF2 AGND2 INDVDFR INDVDFL INDVDC INDVDSR INDVDSL INDVDCB INDVDSW AGND3 OUT1 OUT2 VINFR GOUTFL VINFL AGND10 TNF1 TNF2 BNFA1 BNFB1 BNFA2 BNFB2 OUTFR OUTFL AGND9 OUTC OUTSR OUTSL OUTCB AGND8 OUTSW AGND7 VINC GOUTC VINSR GOUTSR A G ND13 R O UTC2 R O UTC1 R O UTB2 R O UTB1 R O UT A2 R O UT A1 A G ND12 VCC VEE AG ND11 DA CL MUTE THGND GOUTFR A G ND4

INDSPFR INDSPFL INDSPC INDSPSR INDSPSL INDSPCB INDSPSW

A G ND5 GOUTSW VINSW AG ND6 GOUTCB VINCB GOUTSL VINSL F-SW1 F-SW1: INPUT FUNCTION 1 F-SW2: INPUT FUNCTION 2 * 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 IC202 : BD3841FS Function switch DGND F-SW2

CL DA VEE BIAS VCC RECA1 RECA2 RECB1 RECB2 RECC1 RECC2 OUT1 OUT2 INI1 INI2

INA1 INA2 INB1 INB2 INC1 INC2 IND1 IND2 INE1 INE2 INF1 INF2 ING1 ING2 INH1 INH2

LOGIC

+ – + – + – + –

IC205, 207 : NJM4565M

Dual operational amplifier

8 2, 6 3, 5 1, 7 4 V+ –INPUT +INPUT V– OUTPUT IC211 : NJM4556AL

Dual operational amplifier

IC286-288, 289 : TC74HC4052AF Analog multiplexers/demultiplexers 8 2, 6 3, 5 1, 7 4 V+ –INPUT +INPUT V– OUTPUT IC209 : LC72722PM RDS signal processor REFERENCE VOLTAGE 57 kHz bpf (SCF) CCB TEST PLL (57 kHz) ANTIALIASING FILTER SMOOTHING FILTER RAM (24 BLOCK DATA) ERROR CORRECTION (SOFT DECISION) SYNC / EC CONTROLLER SYNC DETECT-1 DATA DECODER CLOCK RECOVERY (1187.5 Hz) MEMORY CONTROL OSC/DIVIDER VREF CLK (4.332 MHz) SYNC DETECT-2 VDDA VSSD VDDD RDS-ID SYNC SYR VSSA MPX IN DO CL DI CE T1 T2 T3 T4 T5 T6 T7 X IN VREF FL OUT C IN X OUT 3 14 15 19 18 24 1 5 6 4 2 20 21 22 23 7 8 9 10 11 16 17 13 12 IC291 : TC74VHCU04FT Hex inverters 1A 1Y 2Y VCC 6A 1 2 3 4 11 2A 6Y 5A 12 13 14 3A 3Y 5Y 4A 5 6 7 8 4Y 9 10 GND 16 VCC 6 INH 10 A 9 B 8 GND 7 VEE 12 0X 14 1X 15 2X 11 3X 1 0Y 5 1Y 2 2Y 4 3Y LEVEL CONVERTER BINARY TO 1-OF-4 DECODER WITH INHIBIT

SW SW SW SW SW SW SW SW 13X-COM 3 Y-COM INHIBIT 0 0 0 0 1 B 0 0 1 1 X A 0 1 0 1 X 0x, 0y 1x, 1y 2x, 2y 3x, 3y NONE

(9)

A

1

2

3

4

5

6

7

8

9

10

B

C

D

E

F

G

H

I

J

K

L

M

N

★ All voltages are measured with a 10MΩ/V DC electronic volt meter.

★ Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed.

★ Schematic diagram is subject to change without notice.

OPERATION

220K s13 100K 6800P 6800P TC74HC4051AF TC74HC4051AF TC74HC4051AF to POWER CABLE to MAIN (1)_W1029 Page 74 H7 to DSP_CB3 P age 69 B8 to FUNCTION (1)_CB205 Page 72 E7 to DSP_CB5 Page 69 B5 to TRANSFORMER to FUNCTION (1)_CB203 P age 72 E1 to FUNCTION (2)_CB290 Page 72 H3 to FUNCTION (1)_CB201 Page 72 C9 to MAIN (2)_W1006 Page 74 J8 to FUNCTION (3)_W3005A,W3005B R, L models U, C, T, K, A, G, J models Page 72 J9 to POWER TRANSFORMER

OPERATION (4)

OPERATION (1)

OPERATION (5)

OPERATION (3)

OPERATION (6)

OPERATION (2)

FL DRIVER

IC251 : LA73050-TLM-E Analog amplifier 35N.C. 33VOUT1 31VOUT2 30N.C. 29VOUT3 32GND 36N.C. 34+VCC1 2 N.C. 4 DCCNT1 6 VIN2 7 MUTE1 8 VIN3 5 GND 1 N.C. 3 VIN1 27-VCC2 25+VCC2 23GND 22VOUT5 21N.C. 24VOUT4 28-VCC1 26N.C. 10 N.C. 12 VIN4 14 GND 15 VIN5 16 MUTE2 13 DCCNT2 9 N.C. 11 N.C. 19-VCC3 20VOUT6 18 -VCC4 17 VIN6 DR 6dB +Vcc DR 6dB DR 6dB DR 6dB +Vcc DR 6dB DR 6dB 52 Display controller Segment digit select/ output circuit Serial receive circuit Digit output circuit Clock generator DIG11/ SEG42 51DIG12/ SEG41 50DIG13/ SEG40 49DIG14/ SEG39 48DIG15/ SEG38 47DIG16/ SEG37 46DIG17/ SEG36 45SEG35 XOUT6 Vcc18 Vcc218 Vss5 Vp64 XIN7 CS SCK 3 SDATA 4 RESET 1 SEG00 44 9SEG34 SEG26 17 19SEG25 Segment output circuit Display code RAM (8-bit x 60) CGROM (35 bit x 166) CGROM (35 bit x 16) code select Code write Code/ command control circuit DIG00 63 53DIG10 IC301 : M66003-0131FP FL display driver 2 data timing clock dot data write scan pulse IC302 : TC4013BP

Dual D-type flip flop

4 RESET1 1 Q1 6 SET1 5 DATA1 CL 3 CLOCK1 CL CL CL CL CL 2 Q1 10 RESET2 13Q2 8 SET2 9 DATA2 7 VSS 14 VDD 11 CLOCK2 12Q2 CL CL CL CL CL CL IC253~255 : TC74HC4051AF Analog multiplexers/demultiplexers 14 15 16 9 13 12 11 10 1 2 3 4 5 7 6 8 4 6 7 5 INH GND VEE VCC 1 0 3 A B C 2 COM RX-V459/HTR-5940/DSP-AX459 models HTR-5935 model no_use (HTR-5935 model) no_use (HTR-5935 model) RX-V459/HTR-5940/ DSP-AX459 models HTR-5935 models RX-V459/DSP-AX459 models RX-V459/DSP-AX459 models D 3 0 1 5 VU99500

(10)

A

1

2

3

4

5

6

7

8

9

10

B

C

D

E

F

G

H

I

J

K

L

M

N

★ All voltages are measured with a 10MΩ/V DC electronic volt meter.

★ Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed.

★ Schematic diagram is subject to change without notice.

MAIN

SURROUND BACK L/R FRONT L SURROUND L/R CENTER SUBWOOFER 10.2 38.6 10.5 8.2 36.8 36.8 36.8 36.8 36.8 36.8 10.0 10.0 10.2 10.5 4.8 4.2 4.8 4.8 4.2 4.3 4.8 4.3 0.1 0 8.2 0 0 0 0 0.1 0.1 0.1 0.1 0.1 59.9 59.8 0 0 0 0 0.1 5.0 0 0 36.9 36.9 36.9 36.9 0.1 -37.5 -36.5 -28.6 0 0 0 -29.2 -29.2 0 0 59.6 0.1 0.6 0.6 -0.5 -0.5 -0.5 -60.1 -1.0 -60.1 -57.7 -57.2 -57.2 -58.3 0.6 1.1 1.1 59.9 59.9 0.1 -1.0 -1.0 1.1 -1.0 -0.4 0 0 0 0 0 -0.6 58.2 0 -0.6 58.2 58.2 58.8 58.2 59.3 1.1 1.0 58.8 -0.6 0 0 59.3 -0.6 0 -0.6 58.2 58.2 58.8 1.1 0 59.3 -0.6 0 -0.6 58.2 58.2 58.8 1.1 0 59.5 -0.6 0 -0.5 58.2 58.2 58.7 1.1 0 59.3 -0.5 0 -13.6 -58.2 -58.2-59.1 1.1 0 -59.4 -13.6 0.1 0 59.6 0.1 0.6 0.6 -0.5 -0.5 -0.5 -60.1 -1.0 -60.1 -57.7 -57.2 -57.2 -58.3 0.6 1.1 1.1 59.9 59.9 0.1 -1.0 -1.0 1.1 -1.0 -0.4 0 0 0.1 0 59.6 0 0.6 0.6 -0.5 -0.5 -60.1 -1.0 -60.1 -57.7 -57.2 -57.2 -58.3 1.1 1.1 59.9 59.9 0 -1.0 -1.0 1.1 -1.0 -0.4 0 0 0 0 59.6 0 0.6 0.6 -0.5 -0.5 -60.1 -1.0 -60.1 -57.7 -57.2 -57.2 -58.3 1.1 1.1 59.9 59.9 0 -1.0 -1.0 1.1 -1.0 -0.4 0 0 0 0 59.6 0 0.6 0.6 -0.5 -0.5 -60.1 -1.0 -60.1 -57.7 -57.2 -57.2 -58.3 1.1 1.1 59.9 59.9 0 -1.0 -1.0 1.1 -1.0 -0.4 0 0 0 0 59.6 0 0.6 0.6 -0.5 -0.5 -60.1 -1.0 -60.1 -57.2 -57.7 -57.2 -58.3 1.1 1.1 59.9 59.9 0 -1.0 -1.0 1.1 -1.0 -0.4 0 0 0 0 A C 32.0 A C 19.8 A C 23.1 A C 88.7 A C 56.7 30.3 23.2 0 0.9 5.0 0 20.4 11.9 -21.0 -12.0 0 0 -12.9 -5.0 0 11.2 5.0 0 11.2 5.0 0 11.2 3.3 0 60.0 -60.1 0.1 0 -0.1 -0.1 20.4 -21.1 -0.1 -0.1 20.4 -21.1 13.8 13.3 30.4 0 0.1 0.1 11.8 11.5 11.2 11.8 11.8 0 0 5.0 -13.6 -54.2 -14.1 0 -14.1 4.5 4.2 -59.4 0 0 0 0 -58.9 0 4.8 4.2 -59.4 59.4 -58.3 -60.1 -48.7 -16.9 to DSP_CB9 Page 69 B9 to DSP_CB4 Page 69 B9 to DSP_CB57 Page 71 D1 to OPERA TION (4)_CB331 P age 73 C5 to MAIN (1)_W1002A Page 74 H9 to OPERATION (2)_CB251 Page 73 I3 YST_CB500 Page 75 B4 to FUNCTION (1)_CB206 Page 72 E8 to FUNCTION (1)_CB207 Page 72 E8 to TRANSFORMER to TRANSFORMER to MAIN (2)_W1002B Page 74 J8

MAIN (5)

MAIN (4)

MAIN (2)

MAIN (1)

IC107 : NJM2388F

Low dropout voltage regulator with ON/OFF control

GND Cont Vin 1 2 Vout 4 3 Thermal Protection Bandgrap Reference ON/OFF control Over Voltage Protection Over Current Protection +

-IC104 : NJM7812FA Voltage regulator INPUT OUTPUT COMMON IC103 : NJM79M05FA Voltage regulator COMMON OUTPUT INPUT IC105 : NJM79M12FA Voltage regulator COMMON OUTPUT INPUT IC101: LM61CIZ Temperature sensor IC100, 102, 106 : NJM2388F

Low dropout voltage regulator with ON/OFF control

GND Cont Vin 1 2 Vout 4 3 Thermal Protection Bandgrap Reference ON/OFF control Over Voltage Protection Over Current Protection +

-HTR-5935 models: 100 RX-V459/DSP-AX459 models RX-V459/DSP-AX459 models no use(RX-V459/DSP-AX459 models) HTR-5935 model RX-V459/DSP-AX459 models RX-V459/DSP-AX459 models RX-V459/DSP-AX459 models RX-V459/DSP-AX459 models RX-V459/DSP-AX459 models 4.7/50 4.7/50 4.7/50 4.7/50 4.7/50 4.7/50

(11)

A

1

2

3

4

5

6

7

8

9

10

B

C

D

E

F

G

H

I

J

K

L

M

N

★ All voltages are measured with a 10MΩ/V DC electronic volt meter.

★ Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed.

★ Schematic diagram is subject to change without notice.

YST

HTR-5935

SUBWOOFER to MAIN (1)_CB101 P age 74 C9

YST

IC500 : NJM2068LD Dual operational-amplifier 8 2, 6 3, 5 1, 7 4 V+ –INPUT +INPUT V– OUTPUT

(12)

参照

関連したドキュメント

For example, a maximal embedded collection of tori in an irreducible manifold is complete as each of the component manifolds is indecomposable (any additional surface would have to

2 Combining the lemma 5.4 with the main theorem of [SW1], we immediately obtain the following corollary.. Corollary 5.5 Let l > 3 be

It is suggested by our method that most of the quadratic algebras for all St¨ ackel equivalence classes of 3D second order quantum superintegrable systems on conformally flat

In this section we briefly review certain basic known results concerning the num- ber K n of key comparisons required by Quicksort for a fixed number n of keys uni- formly

A new method is suggested for obtaining the exact and numerical solutions of the initial-boundary value problem for a nonlinear parabolic type equation in the domain with the

Inside this class, we identify a new subclass of Liouvillian integrable systems, under suitable conditions such Liouvillian integrable systems can have at most one limit cycle, and

Then it follows immediately from a suitable version of “Hensel’s Lemma” [cf., e.g., the argument of [4], Lemma 2.1] that S may be obtained, as the notation suggests, as the m A

Applications of msets in Logic Programming languages is found to over- come “computational inefficiency” inherent in otherwise situation, especially in solving a sweep of