Mitsubishi Electric General-Purpose
AC Servo Sales and Service
Date of issue
September 2017 Title
Design Change in Packaging of MELSOFT MT Works2 and MR Configurator2
Mitsubishi Electric Corp., Nagoya Works
1-14, Yada-minami 5-chome, Higashi-ku, Nagoya 461-8670 Tel.: +81 (52) 721-2111 Main line
No. 17-13E
Design Change in Packaging of MELSOFT MT Works2 and MR Configurator2
Thank you for your continued patronage of the Mitsubishi Electric general-purpose AC servo and the Mitsubishi Electric servo system controllers.
The packaging design of MELSOFT products (MELSOFT MT Works2/MR Configurator2) will be changed as follows.
1. Target Model
Motion controller engineering software MELSOFT MT Works2: SW1DND-MTW2-E Servo support software
MELSOFT MR Configurator2: SW1DNC-MRC2-E
2. Details of the Change
The corporate logo and the shipping marks on the packaging will be changed and printed in a single color. The strength and dimensions of the packaging will remain the same.
Before change After change
3-color printing
Shipping mark: 1 (marked with a red circle)
1-color printing
Shipping mark: 2 (marked with red circles)
- 2 - 3. Reason for Change
As part of resource saving activities (ISO 14001), ink consumption needs to be reduced.
4. Schedule
This change will be made sequentially from the November 2017 production.
Note that, depending on the stock status, both the former and new boxes may be distributed in the market around the same time.
